Summarize:
The main working parts of G series screw pumps are eccentric screws and fixed bushings. Due to the special geometry of the two parts, an independent sealing chamber is formed, the medium flows uniformly from the axial direction, the internal flow rate is low, the volume is constant, the pressure is stable, and vortex and agitation do not occur. Each pump has an output pressure of 0.6MPa, a head of 60m (fresh water), and is suitable for conveying media with temperatures below 80 °C (up to 150 °C for special requirements).
Product Details:
The G series screw pump belongs to rotor type volumetric pump, which relies on the discharge and suction chambers with liners engaged on the screw to realize the volumetric change of the conveyed liquid. It is a kind of pressurized way of screw pump, the main working parts by the liner has a double screw cavity (stator) and with the stator cavity engages the single-head screw (rotor) composition. When the input shaft through the universal joint drive to make the planet around the stator, rotor center rotation, the stator, rotor vice is continuously engaged to form a sealing cavity, sealing cavity volume unchanged for uniform axial movement, the medium from the suction end of the vice to the stator, rotor vice pressed into the inhalation of the media through the stator sealing cavity without being stirred and destroyed.
Application:
1. Environmental Protection: Industrial sewage, domestic sewage, and sludge turbid water containing solid particles and short fibers are especially used in oil-water separator plate and frame filter press equipment.
2. Shipbuilding Industry: round bottom cleaning, oil water, oil residue, oil sewage and other ring transportation.
3. Petroleum Industry: transporting crude oil, a mixture of crude oil and water, a mixture of coal gas and water, pouring polymers into the formation, and the like.
4. Medicine: a variety of thick paste, emulsion, various ointment cosmetics.
5. Food Canning Industry: all kinds of viscous starch, distiller's grains, grain slag, various sauces, pulp, solid slurry.
6. Construction Industry: spraying of cement mortar, lime slurry, paint and paste.
7. Mining Industry: solid particles, groundwater, and slurry water in mines.
8. Chemical Industry: various suspensions, greases, various colloidal pastes, various adhesives.
9. Printing: high viscosity ink, wallpaper PVC polymer paste and various concentrations of pulp, short fiber slurry.
10. Power Plants: coal water slurry transportation.
