- COATING (Covrecoat,Over Print Lacquer):
* SD-740, MV-40 (Clear, Yellow,Red) : Liquid Type Use for Glass & Ceramic Baking Approx. 580 Degree C.
* SD-710 (Clear, Yellow,Red) : Thixo Type Use for Glass & Ceramic Baking Approx. 580 Degree C.
* KSC-1500 : Peel-Off Coating that can be screened on the top of the lacquer-based inks and
removed after the decal has been applied and dried onto a decorated surface.
* CC-2050 : Polaroid Photo Printing Ink on Mug.
* HS-101 : Low Temperature Baking Covercoat below 100 Degree C. For Helmet
PACKAGINGS:
* Square Can Type :
Net 15 Kg / Square Can & Outer by carton box,
36 Cans ( 540 Kgs ) / Pallet.
* Round Steel Drum Type :
Net 17 Kg / Round Drum,
27 Drums ( 459 Kgs ) / Pallet.
MATERIAL SAFETY DATA SHEET ( DATA PREPARED: 1996.9.10 )
=====================================================
-------------------------------------------------------------------------------------------
1. COMPOSITION / INFORMATION ON INGREDIENTS
-------------------------------------------------------------------------------------------
Common Name--------------------CAS-No.---------------------- %
Solvents Naphtha, Aromat-----CAS-No. 64742-95-6----40~60%
Acrylic Resin------------------------CAS-No. 9003-63-8-----30~35 %
Phthelate C16H22O4-------------CAS-No. 1322-94-7-------5~20 %
The manufacturers reserve the right to alter and improve the specifications without notice.
--------------------------------------------------------------------------------------------------
2. Hazards Identification
--------------------------------------------------------------------------------------------------
INHALATION :
EYE CONTACT : Irritating to eyes
SKIN CONTACT: Irritanting to skin
--------------------------------------------------------------------------------------------------
3. FIRST AID MEASURES
--------------------------------------------------------------------------------------------------
3.1 General Remarks :
Bring affected person out of danger area.
Place person on side instable position if unconscious.
Employ mouth-to-mouth resuscitation if breathing ceases.
3.2 Inhalation :
Bring affected person outside and ensure that he/she is comfortable.
Employ mouth-to-mouth resuscitation if breathing ceases.
3.3 Skin contact :
On skin contact, rinse thoroughly with water.
With continous skin irritation, consult doctor.
3.4 Eye Contact
Rinse thoroughtly immediately for at least 5 minutes keeping eyelid open,
Further treatment by eye doctor.
3.5 Ingestition :
Supply with medical care.
--------------------------------------------------------------------------------------------------
4. FIRE-FIGHTING MEASURES
--------------------------------------------------------------------------------------------------
4.1 Suitable extinguishing media :
Usual measures for chemical fires.
4.2 Extinguishing media which must be used for safety reasons
4.3 Special exposure hazards arising from the substance or
preparation itself, combustion products, resulting gases :
Formation of flammable or explosive vapour / air mixtures possible.
Danger of explosion with fire.
Do not inhale explosive gases or smoke fumes.
4.4 Special protective equiptment for fire fighters :
--------------------------------------------------------------------------------------------------
5. ACCIDENTAL RELEASE MEASURES
--------------------------------------------------------------------------------------------------
5.1 Personal Precautions :
Keep person at a distance and stay on them weather side.
5.2 Environmental Precautions :
Dispose of waste in accordence with the legal regulations
issued by the appropriate local and national authorities
5.3 Methods of cleaning up :
Absorb with liquid-binding material (e.g. sand, infusorial earth, inert absorbent ).
5.4 Further Information :
Remove all sorces of ignition.
--------------------------------------------------------------------------------------------------
6. HANDLING AND STORAGE
--------------------------------------------------------------------------------------------------
6.1 Handling :
No dangerous reactions are known to occur with correct handling and storage.
The product should only be handling by trained personel.
6.2 Storage :
Fumes may be released in closed storage rooms or during processing.
Keep containes dry and tightly sealed-even empties.
The product is water dangering.
--------------------------------------------------------------------------------------------------
7. EXPOSURE CONTROLS / PERSONAL PROTECTION
--------------------------------------------------------------------------------------------------
7.1 Additional instructions for technical installation.
Eventual aspiration in case of solvent fumes. Technical protection
measures have always priority over personal protection equipment.
7.2 Ingredients with threshold limit values :
Values of maximum admissible concentration :
500 ppm referring to Solvents Naphtha, Aromat
7.3 Personal Protection
7.3.1 General Protection :
Wash face / hands before break and of work.
7.3.2 Respiratory Protection :
If maximum admissible concentration value at the workplace is
exceeded or you feel trouble, apply respirator with charchol filter.
7.3.3 Eye Protection :
Wear safety goggles with side-shields ( if handling large amounts )
7.3.4 Skin Protection :
Preventive skin protection recommended.
7.3.5 Hand Protection :
Wear protective glove made of solvent-resistent material ( if handling large amounts )
--------------------------------------------------------------------------------------------------
8. PHYSICAL AND CHEMICAL PROPERTIES
-------------------------------------------------------------------------------------------------
8. Physical and chemical properties
8.1 Appearance
8.1.1 Physical state : Fluid
8.1.2 Colour : COLOURLESS or Characteristic
8.1.3 Odour : Characteristic
8.2 Data relevant to safety
8.2.1 Viscosity : ( 25 'C ) -> 11~17.5 Storkes
8.2.2 Flash Point : 42.2 'C ( Closed cup )
8.2.3 Lower Explosion Limits : 1.0 Vol. -%
8.2.4 Upper Explosion Limits : 5.2 Vol. - %
--------------------------------------------------------------------------------------------------
9. STABILITY AND REACTIVITY
--------------------------------------------------------------------------------------------------
9.1 Conditions to avoid :
When heated above flash point and / or with spraying or
atomization, a flammable mixture may form with air.
9.2 Materials to avoid :
(If applicable, information referring to individual components
of the product is given below )
9.3 Hazardous decomposition products :
The product is supplied in a stable form, but if container left open
at room temperature or above, it will lose solvents by evaporation.
9.4 Further information :
--------------------------------------------------------------------------------------------------
10. TRANSPORT INFORMATIOIN
--------------------------------------------------------------------------------------------------
Dangerous goods regulations
RID/ADR/IMDG-Code/ICAO-TL
10.1 Land transport ADR / RID
(interstate / intrastate)
Not restricted
10.2 Inland navigation ADN
For inland navigation consulation necessary :
10.3 Sea transport IMDG
IMDG : Class 9 UN-No. 3062 PG III
Marine pollutant : Yes
EMS : ---- MFAG : ----
Technical name refer to UN-No. :
Enviromentally hazardous substance, liquid, n.o.s. *
Hazardous substance :
Aromatic solvents nephtha.
10.4 Air transport ICAO-YI and IATA-DGR
Not restricted.
--------------------------------------------------------------------------------------------------
11. REGULATORY INFORMATION
--------------------------------------------------------------------------------------------------
Fallow all reguration in your country.
--------------------------------------------------------------------------------------------------
12. OTHER INFORMATION
--------------------------------------------------------------------------------------------------
Reference
Kocosol #100 MSDS. SK Corp.
Thank you for your kind attention.
With Best Regards,
Jim Kim
Sung Do International Co.,Ltd.
60, Mok Dong Joong Ang Buk Ro, Yang Churn-Gu, Seoul, 158-807, South Korea.
Tel & Fax : 031-321-9482
Web: http://sdicom.en.ec21.com
