|
测试设备功能：
The door hardware durability test machine is
customized according to the customer's requirements for durability test of
hinges (included conceal hinge), door closer, mortise lock, Dead lock and
panic exit device. The test doors are actuated by air cylinder with monitor
and sensor. And test door mass, opening speed, closing speed and door opening
angle can be adjusted according to test requirements. If test sample failed,
the equipment can stop test door automatically. The equipment includes a
touch screen to set, control and display the test cycles.
Optional test procedures:
1)Door hinge test: with hinges mounted, without latch,
push the door to open and pull door to close via air cylinder and actuating
arm
2)Door closer test: with hinges and door closer mounted,
without latch, push the door to open via air cylinder and actuating arm and
release door to close under action of door closer.
3)Exit device test: with hinges, door closer and exit
device mounted, push the push/touch bar to release exit device via air cylinder
and release door to close under action of door closer.
4)Door lock test: with hinges, door closer, lock and lever
mounted, (optional: via Step motor operate cylinder to project and extract
deadbolt), via step motor rotate the handle to release latch, via air
cylinder push door to 200mm opening and release door to close under action of
door closer.
5)Door lock & Door closer test: with hinges, door
closer, lock and lever mounted, rotate the handle to release latch via motor,
via air cylinder and driving arm push door to 90 degrade opening and release
door to close under action of door closer.
|
