Extruded Magnesium Alloy Rod Slab Bar AZ31B AZ61 AZ91 For Bicycle Tube Wheelchairs
Semi-continuous casting bar is widely used in the magnesium alloy processing board,belt, rob and bar. it is also used to alloy ingots and other boards.
Processing technology:
Compared with traditional magnesium alloy, Semi-continuous casting has higher strength and extensibility on its organization and composition.
1. Magnesium liquid pouring directly from the holding furnace and making it rapidly crystallization by pipetting and twice refining with high purity and less impurity. it can improve the compactness of the inner metallurgical structure of magnesium rod and make its a more reasonably inner densification crystallization. And the physical nature is greatly enhanced comparing to the traditional casting products.
2. The impurities in rhyolite even tends to zero in the molding product. semi continuous casting magnesium alloy adopts new inert gas protection device, which greatly reducing the amount of entrapped slag and improving the product quality . in the traditional process , the smelting process is completely exposed to the air, which can only inflaming retarding by rholite etc.
3. The surface is smooth and clean, no porosity, no shrinkage, no slag inclusion.
4. The length is flexible. Its existing maximum diameter is Φ600mm. it can be peeled, cut as customized. In addition, we also can produce other different specification product to meet customers’requirement. Various of specifications of magnesium ally flat bar can be semi continuous cast.
Product advantages:
- Light weight. Magnesium metal is the lightest metal material in the world .
- High specific strength .magnesium alloy has a high strength and quality, it also has a certain bearing capacity.
- mall modulus of elasticity. has better strength and anti-seismic and not easily distortion .
- Good anti electromagnetic interference and shield .
- Non pollution and recycle.
- Stable dimensionally and easy processing.
Magnesium Alloy bar Picture show:
Specification:
| Name |
Type |
specification |
Remarks |
| magnesium alloy |
AZ31B |
Casting round bar billet(Φ3-160*3000) |
According to the requirements of sawing and heat treatment |
| ZK61M |
| AZ80A |
| AZ91D |
| M2M |
| ME20M AZ40 |
Magnesium Alloy Chemical composition:
| Alloy Element |
Type |
Chemical Composition% |
Other elements b |
| Mg |
Al |
Zn |
Mn |
Ce |
Zr |
Si |
Fe |
Ca |
Cu |
Ni |
Be |
Sub-total |
total |
| MgAlZn |
AZ31B |
Balance |
2.5-3.5 |
0.6-1.4 |
0.1-0.2 |
--- |
--- |
0.08 |
0.003 |
0.04 |
0.01 |
0.001 |
--- |
0.05 |
0.30 |
| AZ40M |
Balance |
3.0-4.0 |
0.2-0.8 |
0.15-0.5 |
--- |
--- |
0.10 |
0.05 |
--- |
0.05 |
0.005 |
0.01 |
0.01 |
0.30 |
| AZ80A |
Balance |
7.8-9.2 |
0.2-0.8 |
0.12-0.5 |
--- |
--- |
0.10 |
0.005 |
--- |
0.05 |
0.005 |
--- |
--- |
0.30 |
| AZ91D |
Balance |
8.5-9.5 |
0.45-0.9 |
0.17-0.4 |
--- |
--- |
0.08 |
0.004 |
--- |
0.025 |
0.001 |
0.0005-
0.003
|
0.01 |
0.30 |
| MgMn |
M2M |
Balance |
0.20 |
0.30 |
1.3-2.5 |
--- |
--- |
0.10 |
0.05 |
--- |
0.05 |
0.007 |
0.01 |
0.01 |
0.20 |
| MgZnZr |
ZK61M |
Balance |
0.05 |
5.0-6.0 |
0.10 |
--- |
0.3-0.9 |
0.05 |
0.05 |
--- |
0.05 |
0.005 |
0.01 |
0.01 |
0.30 |
| MgMnRe |
ME20M |
Balance |
0.20 |
0.30 |
1.32-2.2 |
0.15-0.35 |
--- |
0.10 |
0.05 |
--- |
0.05 |
0.007 |
0.01 |
0.01 |
0.30 |
Advantage of Hilbo company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting processing production line and precision testing equipment. Can produce a variety of types of magnesium alloy and magnesium alloy products, and developed a high-strength magnesium alloy extruded sheet. Through the purification of ordinary magnesium, magnesium can be raised up to 99.99% of high purity.
Cost advantage
Magnesium alloy casting production can customized as your requirement. the technical process is great, extrusion production required for a variety of bar, no need to purchase from abroad, extrusion molding products is easy molding, low energy consumption, saving production costs.
Workshop:
Product technology advantages
Engaged in magnesium smelting technology personnel with more than 15 years experience, from the selection of primary materials to smelting processing has a wealth of experience and mature management techniques.
We are in magnesium ingots, magnesium alloy extrusion products have technical research and development capabilities. We are come out in front in the Magnesium alloy production enterprises
Testing Equipment
Our services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
Certificate:
We have attained ISO9001 and ISO14001 certificates, Standardize and improve the enterprise quality management system.
FAQ:
1. Q: Are you a factory or trading company?
A: We are direct manufacturer located in guangdong province, and have our equipment!
2. Q: Are your products customized?
A: Yes,the products in the website are only the common type or the previous types, we can supply the new products according to your requirements or drawings.
3. I do not know how to use your product ?
Do not worry ! We can supply technical guidance together with products.
4. Q: How can I get some samples?
A: Several samples are freely offered for buidling the business long-term relationships and letting our customers believing the quality of our products.
5. Q: How does your factory do regarding quality control?
A: Our factory passed CE, ISO, ROSH, UL certification.
