There are 41 AZ31B from 8 suppliers on EC21.com
Related Searches : brass , alloy , wire mesh , brass wire mesh , nickel , brass wire , copper , nickel alloy , valve
Price
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
ONE-STOP SOLUTION
• A number of excellent production equipment.
• Mature process control.
• Advanced testing equipment.
• Excellent traceability system.
• Professional quality management personnel.
• Produced under the condition of non-oxygen casting and electromagnetic stirring.
• The whole industry chain production mode.
• Quick R&D iterations of new recipes.
• Quick life cycle of production.
• Save your costs.
• Quick delivery from sufficient inventory.
Typical Extruded Magnesium Shapes
• Magnesium extrusions can be designed and manufactured in a wide range of shapes.
At Meifu magensium, we have an inventory of standard dies for the following extrusions:
• Angles with sharp or rounded corners.
• Bars in rectangular or square-hexagonal shapes.
• Channels with sharp or rounded corners. Round Rods
• Tees with sharp or rounded corners.
• Tubes with round, IPS round, rectangular, and serrated shapes.
Mechanical properties of main magnesium alloys(Standard chemical compositions and typical room temperature) | ||||||||||||||
Alloys | Chemical composition (mass fraction)/% | tensile strength /Mpa | yield strength | 50mm elongation /% | shearing strength /Mpa | hardnessHR③ | ||||||||
Al | Mn① | Th | Zn | Zr | others② | Tensile /Mpa | compression /Mpa | bearing /Mpa | ||||||
Sand and permanent castings | AM100A-T61 | 10.0 | 0.10 | 275 | 150 | 150 | 1 | 69 | ||||||
AZ63A-T6 | 6.0 | 0.15 | 3.0 | 275 | 130 | 130 | 360 | 5 | 145 | 73 | ||||
AZ81A-T4 | 7.6 | 0.13 | 0.7 | 275 | 83 | 83 | 305 | 15 | 125 | 55 | ||||
AZ91C和E-T6④ | 8.7 | 0.13 | 0.7 | 275 | 145 | 145 | 360 | 6 | 145 | 66 | ||||
AZ92A-T6 | 9.0 | 0.10 | 2.0 | 275 | 150 | 150 | 450 | 3 | 150 | 84 | ||||
EQ21A-T6 | 0.7 | 1.5Ag2.1D | 235 | 195 | 195 | 2 | 65-85 | |||||||
EZ33A-T5 | 2.7 | 0.6 | 3.2RE | 160 | 110 | 110 | 275 | 2 | 145 | 50 | ||||
HK31A-T6 | 3.3 | 0.7 | 220 | 105 | 106 | 275 | 8 | 145 | 55 | |||||
HZ32A-T5 | 3.3 | 2.1 | 0.7 | 185 | 90 | 90 | 255 | 4 | 140 | 57 | ||||
K1A-F | 0.7 | 180 | 55 | 125 | 1 | 55 | ||||||||
QE22A-T6 | 0.7 | 1.5Ag2.1D | 260 | 195 | 195 | 3 | 80 | |||||||
QH21A-T6 | 1 | 0.7 | 1.5Ag1.0D | 275 | 205 | 4 | ||||||||
WE43A-T6 | 0.7 | 4.0Y3.4RE | 250 | 165 | 2 | 75-95 | ||||||||
WE54-T6 | 0.7 | 5.4Y3.0RE | 250 | 172 | 172 | 2 | 75-95 | |||||||
ZC63A-T6 | 0.25 | 6.0 | 2.7Cu | 210 | 125 | 4 | 55-65 | |||||||
ZE41A-T5 | 4.2 | 0.7 | 1.2RE | 205 | 140 | 140 | 350 | 3.5 | 160 | 62 | ||||
ZE63A-T6 | 5.8 | 0.7 | 2.6RE | 300 | 190 | 190 | 10 | 60-85 | ||||||
ZH62A-T5 | 1.8 | 5.7 | 0.7 | 240 | 170 | 170 | 340 | 4 | 165 | 70 | ||||
ZK51A-T5 | 4.6 | 0.7 | 205 | 165 | 165 | 325 | 3.5 | 160 | 65 | |||||
ZK61A-T5 | 6.0 | 0.7 | 310 | 185 | 185 | 170 | 68 | |||||||
ZK61A-T6 | 6.0 | 0.7 | 310 | 195 | 195 | 10 | 180 | 70 | ||||||
die-casting | AE42-F | 4.0 | 0.10 | 2.5RE | 230 | 145 | 145 | 11 | 60 | |||||
AM20-F | 2.1 | 0.10 | 210 | 90 | 90 | 20 | 45 | |||||||
AM50-F | 4.9 | 0.26 | 230 | 125 | 125 | 15 | 60 | |||||||
AM60A和B-F⑤ | 6.0 | 0.13 | 240 | 130 | 130 | 13 | 65 | |||||||
AS21-F | 2.2 | 0.10 | 10Si | 220 | 120 | 120 | 13 | 55 | ||||||
AS41A-F⑥ | 4.2 | 0.20 | 10Si | 240 | 140 | 140 | 15 | 60 | ||||||
AZ91A,B,D-F⑦ | 9.0 | 0.13 | 0.7 | 250 | 160 | 160 | 7 | 20 | 70 | |||||
forging | AZ31B-F | 3.0 | 0.20 | 1.0 | 260 | 170 | 15 | 130 | 50 | |||||
AZ61A-F | 6.6 | 0.15 | 1.0 | 295 | 180 | 125 | 12 | 145 | 55 | |||||
AZ80A-T5 | 8.5 | 0.12 | 0.5 | 345 | 250 | 195 | 6 | 160 | 72 | |||||
AZ80A-T6 | 8.5 | 0.12 | 0.5 | 345 | 250 | 170 | 11 | 172 | 75 | |||||
M1A-F | 1.20 | 250 | 160 | 7 | 110 | 47 | ||||||||
ZK31-T5 | 3.0 | 0.6 | 290 | 210 | 7 | |||||||||
ZK60A-T5 | 5.5 | 0.45① | 305 | 215 | 160 | 285 | 16 | 165 | 65 | |||||
ZK61-T5 | 6.0 | 0.8 | 275 | 160 | 7 | |||||||||
ZM21-F | 0.50 | 2.0 | 200 | 125 | 9 | |||||||||
extrusion | AZ10A-F | 1.2 | 0.20 | 0.4 | 240 | 145 | 69 | 10 | ||||||
AZ31B和C-F⑧ | 3.0 | 0.20 | 1.0 | 255 | 200 | 97 | 230 | 12 | 130 | 49 | ||||
AZ61A-F | 6.5 | 0.15 | 1.0 | 305 | 205 | 130 | 285 | 16 | 140 | 60 | ||||
AZ80A-T5 | 8.5 | 0.12 | 0.5 | 380 | 275 | 240 | 7 | 165 | 80 | |||||
M1A-F | 1.2 | 255 | 180 | 83 | 195 | 12 | 125 | 44 | ||||||
ZC71-T6 | 0.5 | 6.5 | 1.25Cu | 295 | 324 | 3 | 70-80 | |||||||
ZK21A-F | 2.3 | 0.45① | 260 | 195 | 135 | 4 | ||||||||
ZK31-T5 | 3.0 | 0.6 | 295 | 210 | 7 | |||||||||
ZK40A-T5 | 4.0 | 0.45① | 275 | 255 | 140 | 4 | ||||||||
ZK60A-T5 | 5.5 | 0.45① | 350 | 285 | 250 | 405 | 11 | 180 | 82 | |||||
ZM21-F | 2.0 | 235 | 155 | 8 | ||||||||||
Sheet and plate | AZ31B-H24 | 3.0 | 0.20 | 1.0 | 290 | 220 | 180 | 325 | 15 | 160 | 73 | |||
ZM21-O | 0.5 | 2.0 | 240 | 120 | 11 | |||||||||
ZM21-H24 | 0.5 | 2.0 | 250 | 165 | 6 |
Extruded magnesium plate & Rolled plate size specification sheet | |||||||||||||||
Length | 300-1000mm (11.81-39.37 Inch) | ||||||||||||||
Width | 110-400mm (4.33-15.75 Inch) | ||||||||||||||
Thickness | 2-300mm (0.078-12 Inch) | ||||||||||||||
Tolerance | length:0-2mm (0-0.08 Inch) width:0-2mm (0-0.08 Inch) thickness:0.5-1mm (0.02-0.04 Inch) | ||||||||||||||
Remark | meifu magnesium alloy extruded plate can be customized production according to customer requirements, different grades, different sizes and precision requirements, welcome to email consultation |
Registration Date | 2020/02/27(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Manufacturer |
Year established | 2020 |
Employees total | 101 - 500 |
Annual revenue | USD 500,001 - 1,000,000 |
Company | Fujian Meifu Technonlogy Co. LTD |
---|---|
Address | yanqian town wuping county longyan city fujian provinceLongyanFujian364302China |
Phone | 86 - 0597 - 4831333 |
Fax | 86 - 0597 - 4831699 |
Homepage | http://www.meifumg.com |
Contact | zeng |