Forging Iron Railway Bearing Plate/Base Plate/Rail Tie Plate
What is a rail tie plate?
Rail Tie Plate
A rail tie plate, also known as a base plate or sole plate, is a steel plate used in railway construction to connect the rail to the sleeper (or tie), distributing load, maintaining gauge, and protecting the sleeper from wear.
Steel Rails And Railroad Fasteners Supplier
Now, our rail tie plates are mianly forged or casted. If the value is large enough, rolling is acceptable. The raw material of our rail tie plates are QT450-10,20#,35#,etc.
This fixed fishing tie plate is also called PANDR *** tie plate with an elastic clip. This tie plate is widely used in the NA market. We are able to supply 115re plate tie, 132re plate tie, and 100lb plate tie. These tie plates are for 5 1/2" and 6" 115RE rails 100lb rail.
Functions of railroad tie plate
Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system. Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Tie plate are typically installed with a layer of grout cast beneath, which fills the void between the tie plate and the concrete foundation.
The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvanizing.
Rail Base Plate/ Tie Plate Available
Type: For 100RE,115RE,132RE,136RE,90ARAA,UIC50,UIC54,UIC60,TJ45,TJ57,BS69,BS75,BS80A,BS90 rail,etc.
Raw Material: 45#,QT400-15, QT450-10.QT500-7.
Process: Forging,Casting,Rolled.
Surface: Natural,Oil,or according to your requirement.
Our rail tie plate can be made to suit various rail section, i.e. UIC 60, UIC 54, RN 45, 90 A, etc. for wooden, steel or concrete sleepers, depending on the load and rail standard, i.e. UIC 60, UIC 54, RN 45, 90 A, etc. Anyway,we can produce lots of types of rail sole plates or tie plates according to customers’ drawings with full sizes and other technical specifications including the processing technology.
Other tie plate also can be customized in our factory.
1.Base Plates for KPO Fastening System
A rail base plate is a key part in KPO fastening system to support the rail and fix the whole fastening systems, tied onto the rail with rail bolts and railroad spikes.
2.Single Shoulder Tie Plate
For the tie plates of single shoulder, the shoulder is designed at the field end of the plate. The plate’s short end or gauge end is placed inside of the rail track, and that why the rail base width is always required from clients. Single shoulder tie plates are usually used by rails weights running from 56lb though 100 lb.
3.Base Plates for America Market
For American market, the common sizes include 11inches, 14inchies and 14-3/4inches tie plate, they are generally for 5-1/2inches and 6inches width rail base.
4.AREMA Hook Twin Tie Plate
The hook twin tie plate, is widely used for turnouts positioned behind the switch bottoms. In order to ensure the tie spacing, the HTTP is often used in pairs to a single tie. Among the products, the 1st AREMA hook twin tie plate producer of both 3/4’’ and 1’’ thick.
Signum workshorp covers an area of 12,000m².
With ISO9001-2008 Certificate and approved license from China’s Railway Ministry.
Standard or customized products are all available according to the requirements of the clients.
Our products all pass strict testing with a full set of inspection facilities.
With detailed requirements or drawings, you can get a quote to you within 48 hours.
For some rail fasteners, we accept to send you the free samples with freight collect.
Find the Rails and Fasteners you need.
KUNSHAN SIGNUM MACHINERY TECHNOLOGY CO.,LTD
