4560-5" (100 mm x 1.52 m)
4560-10"(100 mm x 3.04 m)
4560-15"(100 mm x 4.57 m)
Free Sample Industrial Amor Wrap Fiberglass Sheath
Repair Armor Cast Tape Used in Mining Industry
Armorcast Structural Material is packed (rolls) dry in a sealed foil envelope and is a flexible fiberglass knit fabric strip that has been saturated with a curable black urethane resin syrup that starts to cure when water is added. Once wet, the fiber strip becomes tacky and sticks to itself, so it wraps easily around almost any shape or size.
Armorcast Structural Material is resistant to moisture, fungus, acid, alkali, ozone, sunlight, gasoline and high temperatures.It combines long life and very little maintenance.
4560-5" (100 mm x 1.52 m)
4560-10"(100 mm x 3.04 m)
4560-15"(100 mm x 4.57 m)
Features
* Simple to apply, no special tools required
* Ansen Armorcast Tape can be used for cable jacket repair and strengthening the old cable and splices
* Ansen Armorcast Tape is resistant to moisture, fungus, acid, alkali, ozone, sunlight, gasoline and high temperatures
* Water activated, no mixing required
* Sets rock hard in minutes. Only 30 minutes required for a complete cure
* Light weight. The fiberglass construction of the tape allows for excellent mechanical protection without extra weight stress on the cables
Storage: Store in a cool, dry area away from direct sunlight.
Shelf life: 2 years from the date of manufacture, which is located on the exterior packaging.
Application
* Wearing gloves to protect your hands from the resin.
* Open the pouch and immerse the Ansen armorcast in fresh water for 4-6 seconds to activate. The entire contents must be used once the package is opened.
Option: You can also apply directly without first dipping in water. The curing time is longer if it is not dipped in water.
* Apply the Ansen armorcast around the damaged area, extending up to 50mm on either side of the cable to ensure complete coverage.
The armorcast tape must be applied quickly as curing starts once it is taken out of the water.
* While wrapping, pull each layer tightly and firmly using your hands to mold and squeeze the layers together in a tightening motion.
* Continue to smooth the surface until the Ansen armorcast has fully set.
* Let it cure and dry. Cables can be moved in 30 minutes.
