There are 12112 High speed from 4339 suppliers on EC21.com
Related Searches : machine , machinery , oil purifier , filter , hardware , cutting machine , oil recycling , oil filter
Price
1 - 4
US$ 85 - 9
US$ 7.5≥10
US$ 7Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
Visit our website www.hbactuator.com for more info.
Description:
Talking about the speed data, this high speed micro linear actuator DJ806 is our fastest model up to 80mm/s at free load, and 65mm/s at full load of 50N. It also has low profile so that you can fit it in a limited installation room. You can try to study another model DJ809 instead that have slightly bigger size and load up to 2000N.
Picking a suitable actuator is more complicated than you think.
Have you ever considered the surface roughness of piston rod matters? We always control the shaft roughness of linear actuator that is not only for a smooth touch but also could decrease the wear of seal rings so that it comes with longer-period waterproof protection.
As you know, water and moisture are ruthless ‘killers’ toall electric products. The actuator is composed of hundreds of parts and any slight change probably bring ‘butterfly effect’.
Model DJ806

![]() | Advantages 1. Less than 1kg dead weight 2. Aluminum housing 3. Metal gears 4. Load up to 1200N 5. Fast speed up to 80 mm/s 6. Optional potentiometer and hall sensor 7. Working temp. -40 to 65℃ |
Specifications
HB-DJ806 | Specs. | ![]() |
Voltage | 12v or 24v DC | |
Load Capacity | 1200 N | |
Stroke | 50to 600mm | |
IP Rate | IP65 | |
Max Speed | 80 mm/s | |
Mounting ends | Custom | |
Certification | CE, RoHS |
IP rating
DJ806 linear actuator comes in IP65.
Below table you can see what IP65 stands for.
IPXX | First digit: Ingress of solid objects | Second digit: Ingress of liquids |
0 | No protection | No protection |
1 | Protected against solid objects over 50mm e.g. hands, large tools. | Protected against vertically falling drops of water or condensation. |
2 | Protected against solid objects over 12.5mm e.g. hands, large tools. | Protected against falling drops of water, if the case is disposed up to 15 from vertical. |
3 | Protected against solid objects over 2.5mm e.g. wire, small tools. | Protected against sprays of water from any direction, even if the case is disposed up to 60from vertical. |
4 | Protected against solid objects over 1.0mm e.g. wires. | Protected against splash water from any direction. |
5 | Limited protection against dust ingress. | Protected against low pressure water jets from any direction. Limited ingress permitted. |
6 | Totally protected against dust ingress. | Protected against high pressure water jets from any direction. Limited ingress permitted. |
7 | N/A | Protected against short periods of immersion in water. |
8 | N/A | Protected against long, durable periods of immersion in water. |
9K | N/A | Protected against close-range high pressure, high temperature spray downs. |
There are limitations of stroke in different load ranges.
The longer stroke comes with the lower load capacity.
Stroke Range (mm) | Max Load (Newton) |
501-600 | 100 |
401-500 | 200 |
301-400 | 400 |
201-300 | 1000 |
30-200 | 1200 |

Load VS Speed
The load we mention basically means dynamic load for pushing force.
You can let us know if your have special requirement of pulling force or static load.
Speed involves of full load speed and free load speed.
There is about 10% allowable tolerance for travel speed.
Code | Dynamic Load (N) | Speed±10% (mm/s) | |
Free load | Full load | ||
A | 200 | 40 | 22 |
B | 100 | 60 | 45 |
C | 50 | 80 | 65 |
D | 600 | 10.5 | 7 |
E | 500 | 16.5 | 12 |
F | 250 | 25 | 20 |
G | 1000 | 7.2 | 5 |
H | 700 | 11.5 | 8.5 |
I | 400 | 17 | 13.5 |
J | 1200 | 5.5 | 4 |
K | 800 | 8.5 | 6.5 |
L | 450 | 13 | 10 |
The retracted length should be a consideration.The longer stroke comes with longer installation length. Below you can see the minima retracted size according to different stroke range. Extra length can be added based on the minima length.
L= retracted length
S= Stroke
Stroke Range (mm) | Min Retracted Length (mm) | ![]() |
30-300 | S+105 | |
301-500 | S+120 | |
501-600 | S+130 |
Electronics specifications
Code | Dynamic Load (N) | Amp (in normal temperature) | |||
12V | 24V | ||||
Free load | Full load | Free load | Full load | ||
A | 200 | 1.5 | 3.5 | 0.6 | 1.5 |
B | 100 | 1.5 | 3 | 0.6 | 1.5 |
C | 50 | 1.5 | 3 | 0.6 | 1.5 |
D | 600 | 1.5 | 2.3 | 0.6 | 1.2 |
E | 500 | 1.5 | 2 | 0.6 | 1.5 |
F | 250 | 1.5 | 2 | 0.6 | 1.5 |
G | 1000 | 1.5 | 3 | 0.6 | 1.2 |
H | 700 | 1.5 | 2.5 | 0.6 | 1.2 |
I | 400 | 1.5 | 2.5 | 0.6 | 1.2 |
J | 1200 | 1.5 | 3 | 0.6 | 1.5 |
K | 800 | 1.5 | 2.5 | 0.6 | 1.2 |
L | 450 | 1.5 | 2.5 | 0.6 | 1.2 |
Application
This item is used to raise and lower power equipment attachments, auto hoods and trunks, position solar panels, television lifts and many other applications around home and farm.


For further details of specifications, dimensional drawings and custom options, please see the data sheet HB-DJ806at our download page.
Wuxi Hongba Manufacturer
In western world and a lot of other nations, the prices are simply way too high. It is not easy to run a business there with high taxes and labor costing much more than here in China. That’s why we here, to help you cut down the material cost and make your end product win more market with competitive price. However, quality is always the basic principle we’ve been following.


One of our big size model weighs more than 20 kg of single unit.
We spent one year to design and build our own automation transition working bench so that it can reduce labor input and minimum work injury.
This bench is able to pick up 8 pieces at one time.


| Registration Date | 2020/08/11(Year/Month/Date) |
|---|---|
| Buyer / Seller in EC21 | Both |
| Business Type | Manufacturer |
| Year established | 1998 |
| Employees total | 101 - 500 |
| Annual revenue | USD 100,000 - 500,000 |
| Company | Wuxi Hongba Mechanical Electrical Equipment Co., Ltd. |
|---|---|
| Address | 5 Lijiang Rd. Xinwu,WuxiJiangsu214028Hong Kong |
| Phone | 86 - 510 - 85436730 |
| Contact | Philippa Zhang |