Free Fall Apparatus
Free Fall Apparatus is designed for studying and measuring the acceleration of gravity.
Experiment procedure: A steel ball is suspended with an electromagnet. The ball is released by a switch on the digital timer (download)to allow the free fall motion. During its descent (or “free fall”), the only force acting on the ball is the force of gravity. The digital timer (download) displays the fall time to the first photogate and the time to pass through the gate after the experimental run. Acceleration of the free fall motion of the steel ball is captured by moveable photogates and recorded by the digital timer (download). The steel ball which is caught after the free fall in a catcher (pocket) at the bottom of the post.
Download
Free Fall Apparatus
Coin and Feather Apparatus,Free Fall Tube
Coin and Feather Apparatus Free Fall Tube is designed to demonstrate free fall in a vacuum. This experiment demonstrates the coin and the feather falling with the same acceleration and striking the tube’s bottom at the same time. It shows the fact that objects of different masses fall at the same rate in a vacuum.The Coin and Feather Apparatus Free Fall Tube consists of a 90cm long and 5.5 cm in diameter plastic tube that is capped on both ends with a rubber stopper, with one end having a 1/4 NPT ball valve(stopcock) fitting for air evacuation.
When the tube is inverted under normal atmospheric pressure, students will see that the coin falls at a faster rate than the feather because of air resistance. When air in the tube is pumped out via a vacuum pump to create a vacuum in the tube, and the tube is inverted, the coin and feather in the tube will fall at the same rate because there is nothing causing resistance anymore in the tube.
Very occasionally the feather sticks at one and and must be dislodged by shaking the apparatus. A small vacuum pump (0201020060) or Laboratory High Vacuum Pump (0201020590) is required.
Download
Coin and Feather Apparatus Free Fall Tube
Coin and Feather Apparatus with a Pressure Gauge
Air Blower
Air Blower is an accessory specifically designed for use with Linear Air Track, air‐cushion turnplate, Free Fall Apparatus(gravity acceleration apparatus)(Download), chemical industry, thermal engineering and etc, provides constant air pressure in the experiments at low noise levels.
Comes with flexible hose pipe and mains lead attached to it.
Operates on 220-240VAC, 50Hz.
Download
Air Blower
Collision in Two Dimensions Apparatus-Momentum, Kinetic Energy Study
Collision In Two Dimensions Apparatus is designed for students to study conservation of momentum and kinetic energy change in collisions. It can also be used to investigate elastic and inelastic collisions.This Collision In Two Dimensions Apparatus comprises a curved aluminum track mounted vertically on a 25cm length and 10cm width flat metal base with an adjustable target support.The track includes an 22cm length inclined section and a 8cm length straight section.
A steel ball in is held at the top of a curved aluminum track.When the ball is released, it travels down the track and collides with another ball placed on an adjustable target support.Students then observe how the two balls fall. A plumb bob attached to the target support provides height of point of collision from the ground and the position on the ground that corresponds to the point of collision.
The Collision In Two Dimensions Apparatus comes with a steel ball, a glass ball, a lightweight and instructions. Includes a clamp to attach to a table.
Deluxe Free Fall-Single Pendulum Apparatus
Deluxe Free Fall-Single Pendulum Apparatus is designed for qualitative and quantitative study of free falling bodies experiments (acceleration due to gravity) with a measurement up to 160 cm of free-fall distance.It is mainly made of an aluminum alloy with a yellow scale. A steel ball is suspended with an electromagnet, which when turned off, plummets toward the catching net, which is fixed on the cast-iron base and tripod at the lower end of the vertical rod.Acceleration of the free fall motion of the steel ball is captured by moveable photogates and recorded by the digital timer (download).
The vertical rod is fixed on a solid tripod base and can be easily adjusted to true vertical by means of the leveling bolts on the tripod base and the included plumbline.
Deluxe Free Fall-Single Pendulum Apparatus includes Free Fall apparatus and accessories, photogates, 18mm steel ball, plumbline, pendulum, cables and plugs, and instructions.Required by not included: Digital Timer with Photogates(download).
The vertical rod is fixed on a solid tripod base and can be easily adjusted to true vertical by means of the leveling bolts on the tripod base and the included plumbline.
Deluxe Free Fall-Single Pendulum Apparatus includes Free Fall apparatus and accessories, photogates, 18mm steel ball, plumbline, pendulum, cables and plugs, and instructions.Required by not included: Digital Timer with Photogates(download).
Download
Deluxe Free Fall-Single Pendulum Apparatus
Dynamic Track
Dynamic Track is designed for students to investigate or experimentally determine the relationships between force, mass, and acceleration . It provides an economical and convincing method to discover Newtons Second Law. Dynamic Track also can be used to carry investigations into momentum, elastic collisions, transfer of energy, straightforward periodic movement and etc. The results produced by this Dynamic Track is repeatable, collect and reliable on every occasion due to its distinctive style and prime quality. The smooth guide of the track ensures that the trolley runs straight with a minimum of friction.
Download
Dynamic Track Investigating Newton’s Second Law by Dragging Paper Tape
Dynamic Track with Support Rod Investigating Force, Mass and Acceleration by Dragging Pape
Dynamic Track Investigating Force, Mass and Acceleration by Embedding Paper Tape
Upper Track and Lower Track Demonstrating Newton’s Second Law
Friction Apparatus investigating frictions quantitatively
Friction Apparatus is designed to investigate static friction, sliding friction and rolling friction.Students can investigate friction qualitatively and quantitatively with our Friction Apparatus.
Friction is defined as the force that resists relative motion between the surfaces in contact when they move past each other. Friction is caused due to irregularities on the two surfaces in contact. when one object moves over the other, these irregularities on the surface get entangled, giving rise to friction. The greater the roughness, the more irregularities and the more significant will be the friction.Friction is helpful in most cases. As a force, friction depends on two external factors. One, Friction is dependent on the smoothness or roughness of the two surfaces between in contact with each other. When the surface is smooth, the friction decreases. While the surface is rough, the friction increases.The other, friction depends on the force that is acting on these surfaces.Friction increases when the force is applied along with the irregularities.There are four types of friction: Static friction, Sliding friction, Rolling friction and Fluid friction. Static friction is the friction that acts between the surfaces when they are at rest with respect to each other.In contrast, sliding friction is the resistance created between any two objects when sliding against each other. Similarly, Rolling friction is the force which resists the motion of a ball or wheel. While, Fluid friction is the friction that exists between the layers of the fluid when they are moving relative to each other.
Download
Friction Apparatus Economy Demonstrating Friction
Friction Apparatus Advanced studying Friction
Friction Apparatus Deluxe Investigating Friction
Kinematics Kit for Motion laws
Kinematics Kit is used for qualitative and quantitative study of Motion laws such as uniform motion and variable motion with a 100cm length,16mm width ‘U’ shaped grooved track for smooth movement of spheres.The track includes an 25cm length inclined section and a 75cm length straight section.This Kinematics Kit is mainly made of an aluminum alloy with a 90cm yellow scale divided into nine equal parts. The photogates on the straight track can be freely moved to any position and can be easily read against the bright yellow scale.The track is fixed on a solid bracket and can be easily adjusted to true level by means of the two leveling bolts on the bracket.A special photogate pair and electromagnet pre-wired to a cable harness are supplied, making electrical setup simple. Just plug the harness into the rear panel of a digital timer (download).
A steel ball in 22mm diameter is attracted by an electromagnet,which can be moved to any position on the inclined track. The ball is released by a switch on the digital timer (download)to allow motion on the track. During its scroll, the digital timer (download) captures the speed and motion time to the first photogate and the speed and time to pass through the next. The steel ball which is caught in a catcher (net) at the end of the track.
This Kinematics Kit includes a rugged aluminum alloy track with Scale, an electromagnetic ball release, a pair of photogates on a long cable harness, a steel ball, a catcher, and an instructional manual. Required by not included: Digital Timer with Photogates(download).
Download
Kinematics Kit for qualitative and quantitative study Motion laws
Linear Air Track with Accessories Economical
Linear Air Track is a simple and economical apparatus with all functionalities designed to provide a cost-effective way of studying all aspects of dynamics in a virtually friction-free environment. This Linear Air Track with all functionalities for exploring for the concepts of mechanics involving velocity, force and acceleration,momentum,potential energy, collisions (elastic /inelastic), conservation of energy,kinetic energy,simple harmonic motion,motion on level and inclined planes. The Air Track is made from high strength extruded aluminium and the rail has one row or two rows of fine holes on each side all along the length of the track.The Linear Air Track also has a scale graduated in millimeters for measuring distances and recording positions.It is supplied with a comprehensive accessories.Linear Air Track System requires an air source and a digital timer.An air source and a measurement are required to build a Linear Air Track System, which can be provided by our Air Blower and digital timer.
Download
Linear Air Track for studying all aspects of dynamics in a virtually friction-free environment
Laboratory High Vacuum Pump for Educational Purposes
Linear Air Track with Accessories Precision provides a cost-effective system for exploring all aspects of dynamics involving linear motion in a virtually friction-free environment.It is an ideal teaching aid for physics.This Linear Air Track can be used to experimentally study in kinematics covering velocity, force and acceleration,momentum,potential energy, collisions (elastic /inelastic), conservation of energy,kinetic energy,simple harmonic motion,motion on level and inclined planes.It is particularly effective in the field of collisions where conservation of momentum is dramatically demonstrated. The Linear Air Track with a perforated rail has a smooth surface and high linearity and is made from strong extruded aluminium,lightweight yet durable.The rail has one row or two rows of fine holes on each side all along the length of the track.An inlet cover is given at one of the ends, which is connected to hose of an air blower. Compressed air is sprayed from the holes and forms a air cushion on the surface of the track. This air cushion fills the space between the air track and the inner surface of a glider. As a result, the gliders move on(float to and fro on) an air cushion can be regarded as almost friction-free. The Linear Air Track also has a scale graduated in millimeters for measuring distances and recording positions.Wireless light gates with built-in-timer provide accurate measurement of various kinematic parameters.It is supplied with a comprehensive accessories.An air source and a measurement are required to build a Linear Air Track System, which can be provided by our Air Blower and digital timer.
Download
Laboratory High Vacuum Pump for Educational Purposes
Linear Air Track with Accessories Precision
Linear Air Track with Accessories Precision provides a cost-effective system for exploring all aspects of dynamics involving linear motion in a virtually friction-free environment.It is an ideal teaching aid for physics.This Linear Air Track can be used to experimentally study in kinematics covering velocity, force and acceleration,momentum,potential energy, collisions (elastic /inelastic), conservation of energy,kinetic energy,simple harmonic motion,motion on level and inclined planes.It is particularly effective in the field of collisions where conservation of momentum is dramatically demonstrated. The Linear Air Track with a perforated rail has a smooth surface and high linearity and is made from strong extruded aluminium,lightweight yet durable.The rail has one row or two rows of fine holes on each side all along the length of the track.An inlet cover is given at one of the ends, which is connected to hose of an air blower. Compressed air is sprayed from the holes and forms a air cushion on the surface of the track. This air cushion fills the space between the air track and the inner surface of a glider. As a result, the gliders move on(float to and fro on) an air cushion can be regarded as almost friction-free. The Linear Air Track also has a scale graduated in millimeters for measuring distances and recording positions.Wireless light gates with built-in-timer provide accurate measurement of various kinematic parameters.It is supplied with a comprehensive accessories.An air source and a measurement are required to build a Linear Air Track System, which can be provided by our Air Blower and digital timer.
Download
Linear Air Track Precision
Vacuum Pump with Gauge Hand-operated
Vacuum Pump with Gauge Hand-operated is a very economical way of removing air from tubes or jars for experimental purposes. Vacuum Pump with Gauge, Hand-operated works well with the Coin and Feather Apparatus.Recommended for general laboratory use for applications that do not require high or precise vacuums. This Vacuum Pump, Handheld with Gauge is made of a durable PVC. A vacuum gauge/pressure gauge on the pump makes in both Pascals (0-0.1 MPa) and mm of Hg (0-760 mm Hg) to indicate actual vacuum. The gauge fits a removable cap and quick-release valve to provide vacuum release without dismantling the pump from the line. This Vacuum Pump, Handheld with Gauge is designed for pulling a partial vacuum, of up to 500 mm Hg, on small closed systems of about 725 ml or less. Each squeeze of the pump displaces approximately 15ml in volume, and can be used to create vacuum of 15mm Hg, or air pressure of about 2 atm (standard atmosphere).
Download
Hand Held Vacuum Pump with Pressure Gauge
