A-1. Open Mill XK-550X1500 ZG-B
Power supply: 380V, 50H (it can be customized)
Diameter of roll: 550mm, hollow roll, alloy chilled cast iron
Width of roll: 1500mm
Linear speed of forward roll: 31.35m/min
Friction ratio of two rolls: 1 : 1.2 (can be customized)
Hardness of a surface rolls, not less: HS68-72
Bearing of roll: Roll bearing with four rows column + deep groove ball bearing
Roll spacing adjustment: Electric + manual
Working distance between two rolls: 0-15mm
Feeding quantity once: 40-60 Kg
Reducer No: ZSY450-45
Motor No: Y315L1-6
Power of motor: 110KW
Rotate speed of motor: 970 r/min
Restrictive plate: Fixed restrictive plate from two planting parts or axial moving restrictive plate
Material of Restrictive plate: nylon
Coupling connecting between motor and roll: Cross slide coupling (direct connection)
Emergency switches: Four mushroom head emergency buttons are located in the front, behind and above the machine. The safety rod rack is above the rolls. Press the buttons or pull safety rod rack, the machine emergency braking.
In case of emergency, cut off the circuit of braking roll, the roll rotation is not more than 90° (0.25 circle), meanwhile the front roll move forward, the moving distance is not less then 25mm.
Size : about L5490mm× W2450mm× H1940mm
Weight: about 22.0Tn.
Delivery Day: 70days
A-2. Open Mill XK-400x1000 ZG-B
| Technology parameter |
Open Mill XK-400x1000ZG-B |
|
| |
| Power supply |
380V, 50Hz |
|
Diameter of roll
Material of roll |
400mm, hollow roll
Alloy chilled cast iron |
|
| Width of roll |
1000mm |
|
| Linear speed of forward roll |
19.35m/min |
|
| Friction ratio of two rolls |
1 ：1.2727 |
|
| Hardness of a surface rolls , not less |
HS: 68-72 |
|
| Bearing of roll |
Roll bearing with four rows column
+ deep groove ball bearing |
|
| Roll spacing adjustment |
Electric + manual |
|
| Working distance between two rolls |
0-10mm |
|
| Feeding quantity once |
18-25 Kg |
|
| Reducer model No. |
ZSY355-50, hardened tooth surface reduce |
|
| Motor model No. / Power of motor |
Y250-6 / 40KW |
|
Restrictive plate
Material |
Axial moving type or combined fixed type Nylon |
|
| Lubrication |
Hand press dry oil pump |
|
| Roll temperature regulating device |
Horn mouth, stainless steel water case |
|
| Bottom plate |
Stainless steel |
|
| Transmission way |
Nylon pin coupling connect motor and reduce;
Cross slide coupling connect reducer and rear roll;
Speed ratio gear of rear roll drive speed ratio gear of forward roll. |
|
| Emergency brake |
Four mushroom head emergency buttons are located in the front, behind and above the machine. The safety rod rack is above the rolls. Press the buttons or pull safety rod rack, the machine emergency braking.
In case of emergency, cut off the circuit of braking roll, the roll rotation is not more than 90° (0.25 circle), meanwhile the front roll move forward, the moving distance is not less then 25mm. |
|
| Size (L×W×H) |
~ 4500mm×1950mm× 1800mm |
|
| Weight |
~9.5Tn. |
|
A-3. Dual open mill XK-660×2130S
Technical parameter
(1) diameter and working length of roller: Ф660×2130mm, hollow roll
(2) main motor: YKK450-5-10-355KW（AC6KV/50Hz ）
(3) reducer: ZSYF800-35.5-ST, two sides double shaft hardened cylindrical gear reducer
(4) universal joint direct transmission with rollers, WXZ435-2000- 2sets, WXZ435-1500- 2sets
(5) line speed of front roller: 29.20m/min
(6) line speed of rear roller: 35.04m/min
(7) speed ratio between front roller and rear roller: 1:1.2
(8) bearing: four row cylindrical roller bearings + deep groove ball bearing
(9) lubrication: double pump thin oil automatic lubrication with the negative pressure return oil system
(10) roller spacing adjustment: electrical + manual, roller spacing digital display
(11) temperature control: copper rotary joint
(12) electric control system: Delixi electrical appliances, rope pulling emergency braking
(13) overall size: ~L15200×W4750×H2960mm
(14) weight: ~100 tons
A-4. Open Mill XK-250x620ZG-B(direct connect)
| Technology parameter |
Mill (XK-250ZG-B) |
|
| |
| Pressure and frequency of electricity |
380V, 50Hz |
|
| Diameter of roll |
Ø 250mm |
|
| Width of roll |
620mm |
|
Rolls heating method - hot water temperature controller / heating power
Rolls cooling method |
Hot water up to 95
18KW / 20KW
Natural water |
|
| Linear speed of forward roll |
15.39m/min |
|
| Friction ratio of two rolls |
1:1.25 |
|
| Hardness of a surface rolls , not less |
HS: 68-73 |
|
| Bearing of roll |
Roll bearing with four rows column + deep groove ball bearing |
|
| Flywheels (Adjust distance between roll) |
Electric + manual |
|
| Distance between two rolls (Working) |
8mm |
|
| Feeding quantity once |
10 -15 Kg |
|
| Reducer No |
ZSY280-40 |
|
| Speed rate |
1:40 |
|
| Motor model |
Y 200L 1-6 |
|
| Rotate speed of motor |
980 r/min |
|
| Power of motor |
18.5KW |
|
| Restrictive plate |
Fixed restrictive plate from two planting parts. |
|
| Emergency switches |
It located in front and behind mill, and also from above. At emergency switching-off - a way of braking rolls no more than 0,25 revolutions roll (90 °) with simultaneous tap(removal) forward roll on distance not less than 25 mm. |
|
| Coupling connecting motor and rolls |
Cross slide coupling |
|
| overall size (L×W×H) |
2726mm× 1860mm× 1550mm |
|
| Weight |
4.5Tn. |
B. Refiner XKJ480X800
| Technology parameter |
Refiner XKJ-480x800 (direct connect) |
|
| |
| Power supply |
380V, 50Hz |
|
| Front roll |
Ф480×800/900mm, hollow roll and smooth roll |
|
| Rear roll |
Ф610×800/900mm, hollow roll and smooth roll |
|
| Linear speed of front roll/rear roll |
32.22m/min / 59.62 m/min |
|
| Speed ratio of two rolls |
1:1.85 |
|
| Hardness of a surface rolls , not less |
HS: 68-73 |
|
| Bearing of roll |
Roll bearing with four rows column
+ deep groove ball bearing |
|
| Roll gap adjustment |
Electric + manual, digital display |
|
| Cutting knife and coiling roll |
Add two knives on the front roll,
one coiling roll |
|
| Production capacity |
About 300 Kg/h |
|
| Reducer No |
ZSY355-31.5 , hardened reducer |
|
| Motor No |
Y280-6, 55KW |
|
| Lubrication way |
Dry oil cup |
|
| Motor and reducer connection |
The motor connect with the reducer via the cross sliding coupling. |
|
| Cooling method |
Bugle head + spraying pipe |
|
| Roping emergency |
It locates in front and behind mill, and also from above. At emergency switching-off - a way of braking rolls no more than 0.25 revolutions roll (90 °) with simultaneous tap(removal) forward roll on distance not less than 25 mm. |
|
| Overall size |
About L4900 x W2450 x H1900mm |
|
| Weight |
About 17500kg |
|
