There are 2 Phantomlab from 1 suppliers on EC21.com
Related Searches : testing machine , tester , test bench , testing equipment , testing instrument , oil tester
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
Test Plate: The test plate has 4 ‘hot’ holes spaced 120mm apart for measuring pixel size in X and Y axes. Four bar patterns up to 2.5lp/cm are available for visual evaluation of spatial resolution. Two opposed angled ramps provide the ability to measure slice thickness.
Uniformity Section: The uniformity section provides a 20cm diameter area that can be visually examined for artifacts and non-uniformities. The integral non-uniformity and RMS noise statistics can be calculated from the pixel values in the area.
End Plate: The end plate has threaded holes to mount the point source holder and the ‘hot’ and ‘cold’ low contrast inserts. When tests are not needed the holes may be plugged with SMR 168 plugs.
The point source holder can be positioned and imaged at the phantom center. The holder is designed for imaging the point sources in air and with scatter. From the reconstructed point source data, a point spread function (PSF) is generated and the full width at half maximum (FWHM) and full width at tenth maximum (FWTM) values can be measured. The modulation transfer function (MTF) may be generated from the PSF if software is available.
| Registration Date | 2023/08/21(Year/Month/Date) |
|---|---|
| Buyer / Seller in EC21 | Seller |
| Business Type | Trading Company |
| Year established | 2005 |
| Employees total | 6 - 10 |
| Annual revenue | Less than USD 100,000 |
| Company | Shenzhen Wanbian Trade Ltd. |
|---|---|
| Address | E-806 Tianbei Huayuan, 75 Guanlan Dadao, Longhua Qu Shenzhen, Guangdong, Shenzhen粤China |
| Phone | 86 - 1992544 - 2844 |
| Contact | Mr.zhu |