Zhejiang Huajian Commodity Inspection Co., Ltd. is a third-party
inspection and inspection company, which is an enterprise approved and
registered by the relevant state departments. Mainly engaged in third-party
inspections, inspections, travel inspections and included inspections.
Guangzhou Huajian Commodity Inspection Co., Ltd. has established long-term
cooperative relations with many enterprises based on the principle of
"safety, guarantee, and commitment". Sincerely welcome friends from
all walks of life to visit, inspect and negotiate business.
third-party inspection and inspection
products generally appear when the manufacturer's products need to go abroad,
and it is impossible for foreign merchants to inspect the products in person,
so they entrust third-party personnel to inspect the products.
1. Inconsistent specifications
serial number defects 1. The specifications
are out of tolerance - the model is not allowed; the cutting knife is not
allowed; the sewing position is out of tolerance when quilting .
2. Poor sewing
2. The needle distance is out of tolerance
- the needle distance is not strictly adjusted according to the process
requirements during sewing.
3. Skipping stitches - intermittently due
to mechanical failures.
4. Off-thread - the needle is not returned
when the needle is raised or dropped; or caused by serious floating thread.
5. Missing stitches - missed seams due to
negligence;
6. Gross leakage - the edge copying machine
fails or leaks; the refraction of the burrs is not strict, the bag digging
technology is not up to standard, and the bag corners are leaking .
7. Floating surface thread - the bobbin
thread is too loose, or the thread pressure plate is too tight.
8. Floating bottom thread - the thread
pressure plate is too loose, or the bobbin thread is tight.
9. Stopping the mouth and spitting back -
the sewing technology is poor, and the mouth is not spit and stopped according
to the process requirements.
10. Anti-warping - the face is too tight;
or the face is placed on the top when sewing.
11. Wrinkling - the needle and thread are
not changed according to the thickness of the sewing piece; or the sewing piece
is long or short.
12. The knotted button - because the
technology is not enough to sew the button ; the suture does not match.
13. Double track - single open thread,
after the thread is broken, the seam line is not on the original stitch; after
the sill is sewn on the patch, two stitches are created when the thread is
repaired.
14. The double lines are not parallel - due
to insufficient technology; or uneven width of the double lines caused by
sloppy operation.
15. Not smooth and straight - the seam is
not evenly eaten , which causes the mouth to be not straight; poor technology
and bending of the open line.
16. Uneven clothes - the inner and outer
seams are not straightened and smoothed; the seams do not match; the upper and
lower pieces are different in tightness.
17. Not square - bag corners, bag bottoms,
swing angles and square collars are not sewn at 90 degrees.
18. Not rounded - round neck, round pocket
corners, round sleeves, round hem of suits, due to poor sewing technology,
there are small horns.
19. Asymmetry - Due to poor technology or
sloppy operation, the parts that must be symmetrical have errors such as
length, height, fat, thin, width and so on.
20. Uneven eating power - when the sleeves
are worn, the uneven eating power of the sleeve mountain will cause the sleeve
mountain to be plump or have fine folds.
21. Skewed position - sleeves , collars ,
less than three positioning points or inaccurate positioning.
the notches are not clearly left when
cutting ; or the grids are not strictly aligned when the material is laid; the
sewing is careless and not aligned with the grids.
23. Upper sill and lower sill - the sewing
technique is low or the operation is sloppy, and the sewing thread is not
always on the side of the seam.
24. Exposed pinholes - the selvedge
pinholes are not removed during cutting; the dismantling holes are not covered
during rework.
25. Beans from collar corners - low sewing
technology; unsatisfactory cutting of collar corner seams; unsatisfactory
folding process ; not pressed by collar corner shaping machine.
26. The position of spare parts is
inaccurate - there is no single-stitched spare parts according to the sample
clothes or craftsmanship during sewing.
27. The label is misplaced - the main label
and the washing water label are not stitched according to the requirements of
the sample clothing or the process sheet .
3. Smudges
28. Handwriting - In violation of the
regulations, the use of pens and ballpoint pens to edit the number of pieces,
the number of workers, and the number of inspection.
29. Oil stains - oil leakage from the
machine during sewing; eating oily food in the workshop.
30. Powder traces - no traces of powder
scratches are removed during cutting; caused by scratching powder during sewing
.
31. Imprint - The cloth head imprint was
not cut out when cutting.
32. Dirty marks - the production
environment is not clean, and the sewing pieces are stacked on the ground; the
sewing pieces are contaminated when they are transferred ; the operator does
not wash his hands before going to work.
33. Watermark - colored cloth seams are
stained with water stains.
34. Rust - Metal buttons, zippers, and
buckles are of poor quality and stained on the seam after rusting .
Fourth, ironing
35. Scalding and discoloration - the
temperature of the iron is too high, causing the fabric to be scorched and
discolored (especially chemical fiber fabrics)
36. Aurora - no steam ironing is used, and
the electric iron is not lined with water to cause partial brightness.
37. Dead marks - the ironed surface is not
smoothed, and irreversible creases are formed.
38. Leaky hot - the work is sloppy, and the
large area is not over hot.
Five, the thread
39. Dead thread ends - after finishing
trimming is not clean.
40. Live thread ends - trimmed thread ends
stick to the garment and are not removed.
6. Other
41. Inverted wool - cutting and layout
error; sewing small pieces and large pieces are inconsistent.
42. Reverse the fabric - sewing workers
will not recognize the front and back, so the fabric is reversed.
43. Cuts in the same direction -
symmetrical cut pieces are cut into one direction due to cutting and marking
errors.
44. Defects are out of tolerance - there
are many defects in the fabric, which are not eliminated during the discharge,
resulting in defects in important parts, and defects in secondary parts
exceeding the allowable number.
45. Inaccurate buckle position - there are
errors such as height or uneven buckle position on the buckle plate .
46. The buttonhole is skewed - the buttonhole
operator is sloppy in operation and does not straighten the garment pieces,
causing the buttonhole to be uneven and firm .
47. Color difference - the quality of the
fabric is poor, the bag is packaged when cutting, the numbering is wrong, the
numbering is wrong when sewing, there is quality color difference and no piece
is changed.
48. Damaged—cutting and trimming thread
ends, accidentally caused by rework and stitch removal and washing.
49. Degumming - the quality of the adhesive
lining is not good; the temperature or pressure during bonding is not enough,
and the time is not enough.
50. Foaming - the quality of the adhesive
lining is not good; the ironing board is not flat or there is no ironing
blanket .
51. Adhesive seepage - the quality of the
adhesive lining is not good; the viscose is yellow, and the temperature of the
iron is too high, which makes the fabric yellow.
52. Inaccurate tacking - the tacking work
is not in the correct position according to the process requirements.
53. The button is not strong - caused by
the failure of the button machine.
54. The tightness of the snap button is not
suitable - the quality of the snap button is caused.
55. Unqualified folding clothes - not
folding clothes according to the process requirements (or customer requirements).
56. The specifications of clothing and bags
do not match - the packer is sloppy and packs the garments into the wrong
plastic bags.
57. Lost work and missing parts - sewing
workers are negligent in their work, forget to install various decorative
trips, decorative buttons or sew a certain part, and packers forget to hang
tags and spare buttons.
58. Packing and matching errors - Packers
are sloppy in their work and do not strictly follow the packing list.
59. Insufficient quantity in the box -
there are too many defective products, and there is no qualified product to
make up for the lack of tail box.
mark on the outer box - the mark provided
by the foreign trade department is wrong; the manufacturer makes a mistake in
identifying the English.
