REIT concrete block splitter is a new-style splitter developed by Reit based on the fully absorption of international advanced technology of the similar products and widely understanding the service conditions of all types of splitters in home concrete block plants. The splitter has strong splitting power with modern design. Its distinctive four-way blades structure guarantees trim fracture surface periphery, natural and beautiful inside texture with high yield. REIT concrete block splitter can be used to split all types of concrete blocks with common specifications and new type concrete blocks for special use.
REIT cement bricks splitter uses gantry frame and four guiding columns. Its
structure is stable with flexible movement. The combination of automatic concrete block supplier device with position-limit mechanism guarantees the precise and reliable positioning of concrete blocks in all dimensions. The synchronization mechanism specially designed makes the up and down main blades apply the splitting force synchronously. Together with forces from the two sides blades, the high quality in splitting the concrete blocks is guaranteed.
The splitter and conveying roller uses modularized design, making that the splitter is suitable for all kinds of production line. It can not only be used as single-station but also expediently jointed in the completely automatic production line.
|
Main Technical Performance Parameter
|
|
Production Rate
|
300-400 pieces/hour
|
|
Maximum Splitting Width
|
600mm
|
|
Minimum Splitting Height
|
300mm
|
|
Minimum Splitting Height
|
40mm
|
|
Maximum Splitting Force
|
60T
|
|
Power
|
7.5kw
|
REIT Splitter consists of six main parts:
一、 Main Machine
The main machine has the synchronization unit that guarantees the up and down blades to touch each other synchronously. Movement of the up and down blades is guided by four ultra wear-resistant guiding lead, driven by a large bore hydraulic drive, which lowers the operating pressure of the hydraulic unit but increases the splitting force easily. The two side blades are driven by independent hydraulic drive. The precise control system makes sure the reliable movement of the two side blades, which guarantees that four blades could split the concrete blocks synchronously and makes the concrete blocks get the most satisfactory fracture surface. The four blades are made of high strength ultra wear-resistant alloy, which makes sure long service life and they can be changed easily.
二、 Automatic Concrete Block Supplier Device
Automatic concrete block supplier device is positioned in the front end of the main machine. The drive roller made of special materials conveys the concrete blocks to the axial line automatically, then the concrete blocks are pushed to the splitting position precisely by the hydraulic cylinder in order to meet the splitting requirement. In order to meet customers’ requirement to adjust conveniently according to different production rate, the speed for the blocks supplier can beadjusted easily. The surface of rolling is handled specially, which is wear-resistant and can be changed easily.
三、 Hydraulic Unit
The hydraulic unit consists of oil tank, valve block, fuel pump, electrical motor and other elements. The advanced element and fine design guarantee the reliable operation and low noise, which makes each hydraulic cylinder run stably and satisfies using requirement of the main machine.
四、 Green Block Conveyor Power Roller Table
It is positioned in the end of the main machine. The power roller that is made of special design conveys the green concrete blocks that have been splitted to the products conveyors. Surface of the roller is handled specially, which is
wear-resistant and can be changed easily.
五、 Product Conveyor Rollaway Nest
There are two product conveyor rollaway nests. One is located in the front of the automatic block supplier device and the other is positioned in the end of the green block conveyor power roller table. Surface of the roller is handled specially, which is wear-resistant and can be changed easily.
六、 Completely Automatic Control System
Completely automatic control system consists of control table, inserted electrical elements, sensor, and control switch. All the elements are from international famous products. The control system controls the whole splitting process completely automatically via precise sensor and control switch.
