There are 2 SF6 leak detector from 2 suppliers on EC21.com
Related Searches : gas analyzer , gas , detector , portable , analyzer , gas detector , combustible , co2 detector , cems
Price
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
Introduction
Power and T&D Industry is developing rapidly with more and more high-voltage and ultra-high-voltage switchgear used, and the demand of GIS is soaring with it. SF6 is widely used in GIS as a good insulation and interruption gas. The compartment tightness of GIS is very critical to its lifetime and the maintenance cost, and the leakage of SF6 will impact the safety and health of staffs and the global warming, too.
There are international and national standards Test Qm method to specify the tightness test of GIS, such as: GB50150-2006 Standard for hand-over test of electric equipment, GB/T 11023-2018 Test method of SF6 gas tightness for high-voltage switchgear , IEC62271-1 Common specifications for SF6-insulated and air insulated high voltage switchgear and control gear,CIGRE TB430 SF6 Tightness Guide, etc.
Features
Application
SF6 Gas Monitoring |
|
Measurement range |
0.1 ppb-10 ppm |
Dynamic rate |
1:100000 |
Detection limit |
0.1 ppb |
Accuracy |
2% |
Response time |
3-10s |
Calibration |
Factory calibration done before delivery |
Operation Environment |
|
Temperature |
0℃ ~ +45℃ |
Humidity |
Below 90% RH, no condense |
Pressure |
Ambient pressure |
Enclosure |
IP20 (IEC 529) |
Vibration test |
33 Hz strong vibration |
Storage Environment |
|
Temperature |
-20℃ ~ +60℃ |
Sampling Environment |
|
Temperature |
0 ~ +49℃ no condense |
Pressure |
930 mbar ~ 1100 mbar |
Humidity |
Tdew +8 ℃ or higher |
Flow rate |
60 ml/min ~ 300 ml/min |
Particle |
< 1 μm |
Dimension |
48.4cm Wx13.9cm Hx40.5cm D (19.1in Wx5.5in Hx16.0in D) |
Weight |
Appx. 13 kg |
Connector |
Specified quick plug for 3mm diameter tube,various plugs can be ordered upon request |
Electric parameter |
|
Power rating |
100 ~ 240VAC, 50 ~ 60 Hz |
Power consumption |
100W |
Interface |
Ethernet、USB、AK |
The sampling points equipped with monitor, fine particle filter equipped |
|
Pump in-built, max. 100m sampling distance, PC embedded with 7" front display. |
|
Data storage appx. 2GB,up to 2-year data (@sampling continuously interval 15s) |
|
Data transfer via USB disk, USB port, Ethernet or Com port |
|
Compensate the interference from water vapor, particle automatically |
|
To work with multipoint sampler to extend to 12/24/32/64 channels |
|
Low adsorption SiO2 coated stainless steel valve set is used in multipoint sampler |
|
Working time for each channel can be defined 1~99min in multipoint sampler |
|
GIS tightness test chamber to be ordered upon request |
|
|
Registration Date | 2019/09/10(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Manufacturer |
Year established | 2012 |
Employees total | 11 - 50 |
Annual revenue | USD 1,000,001 - 2,000,000 |
Company | Duke Technology Co., Ltd. |
---|---|
Address | Room 813,Jinrongkemao Building,NO.15 Shangdixinxi Road, Haidian DistrictBeijingBeijing100085China |
Phone | 86 - 027 - 82433533 |
Fax | 86 - 010 - 82433528 |
Contact | Ying Ma |