Product overview
Shanglishi
Single-Stage, Single-Suction Pipeline Pump:The SSW/SSWH series high-efficiency pipeline pumps feature single-stage, single-suction centrifugal design. These pumps offer energy savings, low noise, and stable performance, making them ideal replacements for traditional IS pumps. They excel in industrial water supply, HVAC cycles, and high-temperature boiler applications, and are customizable for corrosion-resistant and oil-based fluids.
SSG and SSW Vertical & Horizontal Direct-Connected Pipeline Pumps:
These pipeline pumps
are designed for transporting clear water and other liquids with similar physical and chemical properties. They are suitable for industrial and urban water supply and drainage, high-rise building pressurization, garden irrigation, fire-fighting pressurization, long-distance transportation, HVAC systems, bathroom water circulation, and equipment matching. The service temperature for these pumps is T<80°C.
SSRG (SSGRG) and SSRW Hot Water Circulating Pumps:
The SSRG and SSGRG pipeline pumps are widely used in industries such as energy, metallurgy, chemical, textile, and paper production. They are specifically designed for high-temperature hot water circulation in boilers for hotels, restaurants, and urban heating systems. The SSRG type operates at temperatures up to 120°C, while the SSGRG type can handle temperatures as high as 240°C.
SSGH, SSWH Vertical & Horizontal Direct-Connected Chemical Pumps:
These pipeline pumps are designed for transporting liquids with solid particles, corrosive substances, and fluids with viscosities similar to water. They are ideal for industries like petroleum, chemical, metallurgy, electric power, paper, food, pharmaceuticals, and synthetic fibers, with operating temperatures ranging from -20°C to 120°C.
SSYG, SSYW Vertical & Horizontal Direct-Connected Oil Pumps:
This series of pipeline pumps is designed for transporting petroleum products such as gasoline, kerosene, and diesel. These pumps are suitable for temperatures ranging from -20°C to 120°C, ensuring efficient and safe transport of oil-based mediums.
Working conditions
Flow Range: 1-480m³/h
Head Range: 5-155m
Inlet Diameter: 50-200mm
The pipeline pump is designed for transporting clear water or other liquids with physical and chemical properties similar to clear water. If the medium contains fine particles, it is important to specify this during ordering to ensure the pump is equipped with a wear-resistant mechanical seal.
Material Options:
Gray Iron、Ductile Iron、SS304、SS316L
The maximum working pressure of the pipeline pump system is 1.6MPa. This means the combined pressure from the pump head and suction inlet should not exceed 1.6MPa. For systems requiring greater pressure, please specify this when ordering, so that the flow components and connection parts of the pump can be manufactured using cast steel materials.
The pipeline pump operates in environments where the ambient temperature does not exceed 40°C and the relative humidity stays below 95%.
Performance comparison between SSW series pipeline pump and traditional IS type pump：
|
Feature
|
SSW Series pipeline pump
|
Traditional IS-Type Pumps
|
|
Efficiency
|
High, energy savings of approximately 15%-20%
|
Moderate
|
|
Noise
|
Low-noise design
|
Higher vibration and noise levels
|
|
Applicable Temperature Range
|
-20°C to 240°C
|
0°C to 100°C
|
|
Installation & Maintenance
|
Easy to install and maintain
|
Complex installation, frequent maintenance
|
|
Material Options
|
Flexible options: SS304, SS316L available
|
Usually limited to single material
|
