Simple type 3 phase thyristor power regulator SCR3-LA Product Features
1.Linear shift phase control circuit has a good stability performance and high precision.
2.Modularization can stand high pressure and be more reliable.
3.The product integrated control system, power device and auxiliary power supply.
4.Adopted PID control keep temperature precise and stable.
Simple type 3 phase thyristor power regulator SCR3-LA Technical Parameters
Rated Voltage: Three phase 380VAC(three-phase four-wire) 220VAC fan
Rated Current: 25A, 40A, 75A, 90A, 120A
Output Module: shift phase output
The signals of control: 4-20mA,0-5VDC,0-10VDC(These three signals can be switchable). If you want to manually adjust by the potentiometer of 2-10K, please switch to 0-5VDC.
Environment Conditions:
Temperature: below 45°C
Humidity: below 90%RH
Simple type 3 phase thyristor power regulator SCR3-LA
Product Model
| Product Type |
SCR3-LA |
| Rated Current |
25A 40A 75A 90A 120A |
External Dimension
(mm) |
W |
100 |
| L |
110 |
| H |
145 |
Installation Dimension
(mm) |
W |
90 |
| L |
80 |
Simple type 3 phase thyristor power regulator SCR3-LA Operation Warning
1. The main circuit adopts three-phase four-wire input without requirement for phase sequence.
2. For SCR is a product with a high current, please keep in mind that terminals of R,S,T and U,V,W be locked tightly, or SCR will be burned by terminals’ heating.
3. When Y connection is used for three-phase load, the center of Y should be connected with zero line, if not so, relative equilibrium of the three-phase is required.
4. During the use of module, when the load power is more than 15KW, it's best to be equipped with proper radiator, and heat conducting silicon grease should be coated between radiator and SCR backboard with wind cooling.
5.
Module protection: Please use semi-conductive fast fuse for load over current.
Remark: When the working power is more than 15KW,please keep in mind that the radiator should be used frequently.
