Tiny magnetic high pressure reaction kettle----- WCGF SERIES
Introduction
The product is Used for chemical industry, chemical industry, medicine and the development of new energy industry such as high temperature and high pressure synthesis and hydrogenation reaction or catalytic reaction at the same time need to measuring temperature, measuring speed and adding gas, pacify pressure and realize on-line sampling requirements under high temperature and high pressure experiment environment.
Future
1.Manufactured ultrahigh pressure, explosion-proof mechanical design
2.The small lightweight design
3.Pressure relief valve to realize intelligent freedom set over pressure alarm from leakage
4.The machine can realize 31 period of continuous programming controller accuracy are comparable to those obtained with imported products Peroration
5.Implementation secondary online charging under high temperature and high pressure, online sampling
Applications: single crystal, catalytic reaction, Fischer - Tropsch synthesis reaction, hydrogenation reaction, polymerization, homogeneous reaction and carbon dioxide super critical reaction, etc. Patent no. : ZL201003127577.1
The function configuration and technical parameters
1.Effective volume :25ml,50ml,100ml,200ml,500ml(Need to be customized)
2.Working temperature:room temperature-450ºC
3.Working pressure:10pa/20pa/30pa
4.Material:SU316Lstainless steel/titanium/Hartz alloy
5.The valve and connection materials :SU316Lstainless steel
6.The reactor inner sleeve :Lined with ptfe live inner sleeve /Quartz glass inner sleeve
/Live within the set of
7.With the design of temperature control heating device and uniform heat transfer
8.With gas and heat function
9.With magnetic stirring function
Optional outer protection box
1.For gas phase, liquid phase on-line detection
2.With operating temperature, pressure sensor and display
3.With automatic pressure protection
4.With online add bin under high pressure
temperature:Up to 350 pure titanium, hartz alloy material, stainless steel material of up to 250, the precision of temperature display: ±1ºC standard contains nc mixing device, a set of pure titanium, 316 l, hartz kettle body, a set of alloy materials, oil bath heating, heating wire heating, ceramic furnace heating, two needle valve, ball valve and two pressure gauge, a 1.5 m connecting pipe, stainless steel 300 mm online sampling tube for decompression and connecting pipe, 1.5 m gas phase analysis a set of special wrench.
Stirring speed and temperature are digital display 0 to 1500 RPM, ±5 RPM speed precision, power supply: 220 v, 50 hz, stirring power: 25 w - 100 w with the model, the heating power 300 w to 1000 w with the models. Insulation: the aluminum silicate cotton vacuum calibrating environmental body warm, insulating layer: use of alkali-free glass fiber, insulation coefficient, relative humidity≤ 35% ≥500M. The work time: 96 hours of continuous work
Minimum pressure readings :1pa
Valve pipe fittings for not marking standard, interface are the standard configuration. Ball valve can be connected to the inert gas bottle filling, inert protection experiments, realization of reactants is not direct contact with air ,Needle valve can be used as an online testing samples
| Tiny magnetic autoclave |
| specification |
|
|
|
| model |
size |
capacity |
Display precision |
| WCGF-25 CKGF-25 |
40*60 |
25ml |
±1ºC ±0.5ºC |
| WCGF-50 CKGF-50 |
60*80 |
50ml |
±1ºC ±0.5ºC |
| WCGF-100 CKGF-100 |
80*120 |
100ml |
±1ºC ±0.5ºC |
| WCGF-200 CKGF-200 |
80*140 |
200ml |
±1ºC ±0.5ºC |
| WCGF-500 CKGF-500 |
100*180 |
500ml |
±1ºC ±0.5ºC |
