There are 67 Wall Putty Powder from 42 suppliers on EC21.com
Related Searches : adhesive , redispersible polymer powder , sealant , polyurethane foam , tile adhesive
Supplier Info.
Report Item
Your report on Product(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
WALL PUTTY POWDER
Product features/advantages
Green environmental protection, Purify air,Easy construction & easy to polish,
Super waterproof, White and fine powder, Strong cohesive force
Product performance characteristics
1/Strong adhesive force, strong adhesion to walls and coatings.
2/Good crack resistance, good water resistance, anti - bacterial anti - mildew.
3/Good waterproof and air permeability, ensure the surface of wall and paint dry.
4/Feel natural, make sure the adornment effect of coating is reflected thoroughly.
Surface treatment
1/ The substrate and surface shall be firm and smooth, clean, free of grease, no wax marks and other loose objects.
2/The surface of the new plaster should be maintained for about 20 days before the putty is putty.
3/ If the wall is too dry before construction, the wall should be wetted in advance.
Operation process
1/Mix proportion: 20KG powder + 6/7kg water.
2/ Pour the water into the container first, then add the powder to the mixture, then mix it thoroughly with the blender until the powder is free.
3/After the first layer is finished, the second construction can only be carried out for about 4-6 hours after the first layer is finished.
4/Smooth the putty powder, the thickness is generally 1.0-1.5mm.
5/The putty can be painted after 7 days.
6/Putty layer after 24 hours of dry and solid, the visual temperature and humidity can be water conservation, maintenance 2-3 days.
Notes
1/The vertical and flatness of the substrate must be determined before construction.
2/Remember to mix the dry paste with water.
3/Under normal temperature, the putty should be used up within 3 hours.
4/Depending on the weather condition, it can be polished in one to two days. When it is polished, only the knife mark should be polished. Do not over-polish it to avoid the impact of the strength.
5/The shelf life is one year.
NO. | Inspection items | The measuring unit | Inspection methods | The technical requirements | The inspection results | Item Result | |
1 | Container state | JG/T298-2010 | No lumps | Same | Qualified | ||
2 | construction | Scratch barrier-free | Same | Qualified | |||
3 | polishing | Hand polish | Same | Qualified | |||
4 | Resistance to water | ------------- | GB/T1733-1993 | 48h no air bubbles, cracking and obvious powder | Same | Qualified | |
5 | Dry time (surface dry) | h | GB/1728-1979 | ≤5 | 2h43min | Qualified | |
6 | Early drying and cracking resistance | ------------- | JG/T24-2000 | No crack | Same | Qualified | |
7 | Bond strength | Standard state | MPa | JG/T24-2000 | >0.50 | 0.60 | Qualified |
After flooding | >0.3 | 0.40 | Qualified |
Registration Date | 2018/01/30(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Trading Company |
Year established | 2006 |
Employees total | 51 - 100 |
Annual revenue | USD 100,000 - 500,000 |
Company | Trungdantrading |
---|---|
Address | 40 d2 street ward 25Binh Thanhho chin minh city630045Vietnam |
Phone | 84 - 7845 - 154789 |
Contact | Trung Dan |