Water-Proof Agent Concrete Hardener

1. DESCRIPTION
GOODCRETE concrete sealer is the advanced economical, hardener and densifier for concrete. CS treatment deeply penetrates and reacts with the concrete to produce insoluble calcium silicate hydrate within the concrete pores. Surfaces treated with  GOODCRETE CS will resist damage from water, surface abrasion, eliminate dusting and simplifies maintenance. GOODCRETE CS should be used where the specification calls for just a hardened floor with or without burnishing and no grinding or polishing is required. Typically this product would be used on new slabs either at the time of placement or after a wet cure, chemical cure or after 28 days of curing or construction. GOODCRETE CS can also be use on a previously densified floor where sodium or potassium was used at one time and the surface is starting to dust or deteriorate.

2. BENEFITS
Excellent Penetration
GOODCRETE CS contains a highly reactive lithium catalyst, which achieves a more efficient penetration into the floor surface and triggers a much faster and more complete reaction with the concrete than traditional sodium silicate.

Hardening
The GOODCRETE CS solidifies the component parts of the concrete into one solid mass, increasing the density, toughness, hardness and substantially increasing the abrasion resistance and durability of the concrete surface. Smooth steel troweled surfaces develop a marble-like finish and sheen. The GOODCRETE CS treated concrete has been
compressively tested 38% harder after 30 days 

than fully cured untreated concrete. And will not peel or flake.Greater Abrasion Resistance Concrete floors treated with GOODCRETE CS will significantly improve abrasion, in comparison to conventional sodium or potassium hardeners.

Eliminates Dusting
In ordinary concrete, tiny particles of dust are pushed to the surface through an upward force called hydrostatic pressure, resulting in efflorescence, which leads to dusting. GOODCRETE CS eliminates efflorescence and prevents dusting making concrete easy to maintain.

Reduces or Eliminates ASR
(Alkali Silicate Reaction) due to high lithium content. High concentrations of sodium or potassium salts, which will contribute to surface crazing and surface ASR, are not present in GOODCRETE CS. Lithium will not absorb water or contribute to floor sweating.

Reduces Tire Marks
The rough, uneven texture of natural concrete causes tires to abrade, adding to their wear. A concrete floor treated with  GOODCRETE CS will make the entire surface smooth, preventing this abrasion and leaving minimum tire marks on the floor.

Improves Condition of Old Floors
As concrete ages, surface stress, delaminating, curled cold joints, and other problems can arise. C2liquid hardeners/densifiers combined with our customized grinding and polishing technique can remove the top surface layer of the old concrete and strengthen the floor, increasing its impact and abrasion resistance.

Little or No Production "Down Time"
Cures quickly. Floor can be put into service

immediately after the application process is complete.
Due to the cleanliness of the process and the lack of

toxic or hazardous chemicals, floors can often be serviced while the plant is in full production.

Cost Effective
v         GOODCRETE CS is easy to apply, up to 100m2/man per day, this efficiently save the expensive  labor cost.
v         After one time application, GOODCRETE CS can give permanent, all-sided improvement and protection of the floor's performance, appearance and light reflectance, whatever new or old. Thus, greatly deduce the costs of maintenance and repair.Environment FriendlyGOODCRETE CS is a water-based solution, it is odorless, colorless, non-toxic, non flammable, non-mutagenic & carcinogenic, complies with all known national, state and district AIM VOC regulations(safe in food preparation areas), fast drying, easy to apply.

3. ADVANTAGES
v         Compatible with all lithium hardeners, densifiers, sealers and cleaners.
v         Helps Concrete Curing. For best results, use GOODCRETE CS first for hardening and densification followed with a water-based, dissipating curing membrane. GOODCRETE CS should not be substituted as a curing agent.
v         Easy to Use. Reduces application time and costs of burnishing and diamond polishing operations. One step application. No white salty spots on concrete, No scrubbing and flushing required after application. No caustic wastewater.
v         Ordinary cleaning can easily remove blemishes and tire marks.
v         Lithium does not absorb water or contribute to floor sweating.
v         An extremely hard marble-like shield and
v         permanent impregnated surface can be achieved for the life of the concrete with one single application.
v         May be applied to broom finished, steel troweled, power troweled or burnished concrete finishes before final cure.
v         Much safer and easier to apply than conventional sodium or potassium silicate hardeners.
v         Produces a fast surface gloss, which improves with traffic and maintenance.
v         Slip resistance is not diminished with high gloss and hardness.
     
4. COMPLIANCE
Complies with all known national, state and district quality regulations,

Technical Data

Our construction cement waterproofing products as below:
DEEP PENETRATING SEALER(DPS), 
waterproofing agent Top Seal (TS), 
RMO,
concrete hardner, lithium silicate concrete hardner, sodium silicate, potassium silicate, sodium potassium silicate