Overall Dimension |
1 | Length (with bucket on ground) | 8100 (mm) |
2 | Width (to outside of wheels) | 2800 (mm) |
3 | Bucket width | 2946 (mm) |
4 | Height (To the top of the cab) | 3450 (mm) |
5 | Wheel base | 3100 (mm) |
6 | Tread | 2200 (mm) |
7 | Min. ground clearance | 450 (mm) |
Main Technical Specification |
1 | Rated load | 5000 (Kg) |
2 | Operating weight | 16500 (1±5%) KG |
3 | Rated bucket capacity | 2.8 (m3), optional 2.2-4.5 (m3) |
4 | Max. breakout force | 165kN |
5 | Max. dump clearance | 3140 (mm) |
6 | Dump reach | 1180 (mm) |
7 | Dump angle at any position | ≥450 |
8 | Digging depth (with bucket bottom horizontal) | 27 (mm) |
9 | Min. turning radius |
| (1) Outside of bucket | 6689 (mm) |
(2) Outside of rear wheel | 5970 (mm) |
10 | Pivot angle frame | 380 |
11 | Oscillating angle of rear axle | +11o |
12 | Lifting time of bucket | ≤6.2 (sec.) |
13 | Lowering time of bucket | ≤3.8 (sec.) |
14 | Dumping time | ≤1.8 (sec.) |
15 | Traveling speed (Km/h), 2 forward and 1 reverse |
| (1) 1st gear (forward/reverse) | 11.7/15.9 |
(2) 2nd gear forward | 40.3 |
Diesel engine |
1 | Model | Chinese Engine WD10G220E23 |
2 | Type | Direct injection. Turbocharge. Water cooling |
3 | Rated output | 162 (Kw) |
4 | Inter-bore of cylinder/stroke | 126/130 (mm) |
5 | Displacement of cylinder | 9.726 (L) |
6 | Model of starting motor | KB-24V |
7 | Power of start motor | 7.5 (KW) |
8 | Voltage of starting motor | 24 (V) |
9 | Rated speed | 2000 (r/min.) |
10 | Max. Torque | >900 (N.m) |
11 | Starting type | Electric |
12 | Min. specific fuel consumption | <220g/Kw.h) |
13 | Engine specific oil consumption | 0.95-1.77 (g/Kw.h) |
14 | Net weight | 1000 (Kg) |
Transmission System |
(1) Hydromedia Transmission |
1 | Model | ZL50B-012 |
2 | Type of torque converter | 4-elements. single stage |
3 | Torque ratio | 4 |
4 | Cooling type | Pressure oil circulating |
5 | Type of transmission case | Power shift, spur gear constant-mesh |
6 | Gear shift position | 2 Forward and 1 reverse gears |
(2) Axle and Tire |
1 | Type of main reducer | Spiral bevel gear, single stage |
2 | Gear ratio of main reducer | 4.625 |
3 | Type of final reducer | Single stage planetary |
4 | Gear of ratio of final reducer | 4.929 |
5 | Gear ratio | 22.795 |
6 | Max. drawing force | 150kN |
7 | Size of tire | 23.5-25-16PR |
Working Device Hydraulic System |
1 | Model of oil pump | JHP2080S |
2 | System pressure | 18MPa |
3 | Model of Mutichannel conversion valve | GDF-32-YL18 |
4 | (D*L) Dimension of lifting cylinder | Ф160*90*810 (mm) |
5 | (D*L) Dimension of tilting cylinder | Ф180*90*563 (mm) |
Steering System |
1 | Type | Middle articulated frame. Full-hydraulic Steering |
2 | Model of steering pump | JHP2080S |
3 | Model of redirector | TLF1-E1000B+FKB6020 |
4 | Model of priority valve | YXL-F250F-N7 |
5 | System pressure | 16MPa |
6 | Dimension of steering cylinder | Ф90*400 (mm) |
Brake System |
1 | Type of traveling brake | Caliper disc brake
Air over oil activate 4 wheel brake |
2 | Air pressure | 6-7.5 (kgf/cm2) |
3 | Type of parking brake | Hand brake
Flexible shaft control clamp brake |
Oil Capacity |
1 | Fuel (diesel) | 250 (L) |
2 | Engine lubricating oil | 24 (L) |
3 | Oil for converter and gear box | 45 (L) |
4 | Oil for hydraulic system | 180 (L) |
5 | Oil for driving axles (F/R) | 36 (L) |
6 | Oil for final reducer | 14 (L) |
7 | Oil for brake system | 3 (L) |
