| Cuttable material | Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Glass fiber reinforced resin, Chrome Cobalt sintered metal |
| Loadable workpiece shape | External Diameter | 98.5 mm |
| Max Height | 60 mm |
| Step | 10 mm |
| Pin Type Diameter | 6 mm |
| Loadable workpiece weight | Up to 850 g |
| Number of adapters housed | 6 |
| Operating speed | XYZ axis: | 6 to 1,800 mm/min. (0.24 to 70.9 in./min.) |
| Spindle motor | Brushless DC Motor |
| Spindle speed | 6,000 to 30,000 rpm |
| Rotary axis travel angle | A axis | ±360° |
| B axis | ±30° |
| Number of burs housed | 15 |
| Attachable bur | Shank diameter | 4 mm |
| Length | 40-55 mm |
| Compatible compressed air | 0.05/0.2 MPa (Automatic switch) |
| Interface | USB |
| Control command set | RML-1, NC code |
| Power requirements | AC 100 V to 240 V ±10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC60664-1) |
| Power consumption | Approximately 200 W |
| Operating noise | During operation | 70 dB(A) or less (when not cutting) |
| During standby | 45 dB(A) or less |
| External dimensions | Width | 19.5 in (495 mm) |
| Depth | 26.0 in (660 mm) |
| Height | 23.6 in (600 mm) |
| Weight | 147.7 lbs. (67 kg) |
| Installation environment | Altitude | Up to 6,562 ft. (2,000m) |
| Temperature | 41 to 104 °F
5 to 40°C |
| Humidity | 35 to 80% (no condensation) |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) |
| Short-term temporary overvoltage | 1,440 V |
| Long-term temporary overvoltage | 490 V |
