Sleeve Label Shrink Tunnel Machine
- Brief Introduction
Steam shrink tunnel is used for shrinking sleeve labels to label kinds of bottles: different and irregular round bottles, square bottles, flat bottles and women-shaped bottles. By shrinking shrinkable film sleeve to seal bottles caps /necks, wrap bottles body even cover bottle bottom.
To get smooth shrink effect, we usually adjust the heights and positions of the 3 sections of steam spray tubes insides of tunnel. Bottles run on the conveyor, the shrink usually goes from down to top of bottles.
- Features of our steam shrink tunnel.
The blower motor’s holder is made of SS304 stainless steel.
The elbow which connects blower motor is made of SS304 stainless steel.
The whole of frame and doors are made SS304 stainless steel.
The steam spray tubes are made of SS304 stainless steel.
The steam transmission tubes are made of SS304 stainless steel.
The leafage inside of blower is also made of SS304 stainless steel.
| Item Models |
HF-1200M |
HF-1500M |
HF-2000M |
HF-2300M |
| Length of tunnel |
1.2meters |
1.5meters |
2.0meters |
2.3meters |
| Blower powder |
Ø12, 0.25KW |
Ø12, 0.25KW |
Ø12, 0.25KW |
Ø12, 0.25KW |
| Powder supply of blower |
220V 3P 60Hz or 220V 1P 50Hz |
| Entrance /exit height |
Max 350mm |
| Entrance /exit width |
130~210mm (fixed size once confirmed) |
| Running pressure |
Max 0.6Mpa |
Max 0.6Mpa |
Max 0.6Mpa |
Max 0.6Mpa |
| Weight |
180kg |
200Kg |
220kg |
230kg |
| Steam consumption |
18kg/h |
21kg/h |
24kg/h |
24kg/h |
| Conveyor speed |
0~35m/minute |
0~35m/minute |
0~35m/minute |
0~35m/minute |
| Outline size (m) |
L1.2*W0.4*H1.5 |
L1.5*W0.4*H1.5 |
L2.0*W0.4*H1.5 |
L2.3*W0.4*H1.5 |
