17m Wholesale

Automatic Robotic Swimming Pool Cleaner with Rope 17m

• Min. Order:  

  100 Set

• Price:  

  US$ 488

• Place of origin:  

  China

• Supply Ability:  

  10000

I. Product Introduction The Swimming Pool Cleaning Robot is a fully automatic vacuum cleaner for swimming pools, and mainly used to clean hairs, leaves, and sand grains in the swimming pool, and sweep and brush dirt, and other stains on the bottom, walls, and lane lines of the swimming pool. You just need to set up the corresponding mode and put the cleaning robot in the swimming pool, it will st

[Related Keywords : pool cleaner, underwater works, cleaning robot, automatic]

D155 Bulldozer Carrier Roller

• Min. Order:  

  2 Piece

• Price:  

  US$ 10 ~ 100

• Place of origin:  

  China

17M-30-00340 KM3601 67 Carrier Roller D355A-1 195-30-00106/195-30-00103/ 195-30-00104 KM578 72.3 Carrier Roller D375A-1 195-30-00580 KM2160 70.5 Carrier Roller D375A-2,3 195-30-01040 KM1281 72.6 Carrier Roller JOHN DEERE 450G AT167254 ID355 21.4 Carrier Roller JOHN DEERE 650G AT167256 ID790 26.3 Carrier Roller JOHN DEERE 650H CR2880 20.5 Carrier Roller JOHN DEERE 700H/750C AT175426 CR4799/ID1450

[Related Keywords : excavator carrier roller, Carrier Roller]

XY1500mAh-10C

• Min. Order:  

  10 Piece

• Price:  

  US$ 0.5~0.51

• Place of origin:  

  China

Internal Resistance ≤17mΩ Cycle Life 300 Charge Voltage 4.2V士0.03V Charge Current 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current 15000mA Operating Temperature Range Recharge (0-45°C) Discharge (-20-60°) Long time Storage Temperature -20~25°C Initial Size Diameter:18.15+0.20mm Height:65.0士0.50mm

[Related Keywords : 1500mah, 3.7 v 1500mah battery, icr 18650 battery 1500mah]

Laboratory Rotary Evaporator 1L 3L 5L Vacuum Lifting Type Benchtop Vacuum Rotary Evaporator

• Min. Order:  

  1 Unit

• Price:  

  US$ 375 ~ 1180

• Place of origin:  

  China

• Supply Ability:  

  100 units per month

17m2 0.26m2 0.26m2 Bath size&volume Φ235*145H mm, 6.2L Φ255*155H mm, 7.9L Φ275*160H mm, 9.5L Dimensions 630W*400D*(690-810)H mm 690W*490D*(810-930)H mm 690W*440D*(825-915)H mm Weight 20.5kg 21.5kg 30kg Model EV-52A EV-52C (5299) Power supply 220-240V, 50Hz Overall power 1240W 1255W Rotating motor power 40W Lifting motor power Manual lift 15W1/15 Heating power 1200W Control panel Digital displa

[Related Keywords : Lab rotovap, 1L rotary evaporator, small rotary evaporator, mini rotovap]

Activated Carbon Fiber, Anti-Dust Acf Mask, Acf Filter Bag, Acf Felt, Acf Cloth

• Place of origin:  

  China

17m Solvent recovery material 3.5-4.5mm 1.15-1.17m Solvent recovery material ACF-1600 BET≥1400m2/g 1.4-2.2mm 1-1.1m drink water filter pad/disk 2-2.5mm 1.2m drink water filter pad/disk Water filter core material 3-4mm 1.17-1.2m Solvent recovery material Blood filter material Wound dressings ACF-1700 BET≥1500m2/g 3-4mm 1.17-1.2m Solvent recovery material ACF-1800 BET≥1600m2/g 3-4mm 1.17-1.2m

[Related Keywords : Activated Carbon Fiber]

1300mm Width MDF Shaving Plywood LVL Wood Board Multi Blade Rip Saw Plate Slitting Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

• Supply Ability:  

  100 sets per month

17m/min (adjustable frequency conversion) Num. of feeding rollers 7/14 (front 3 groups, rear 4 groups) Precision Opening width tolerance ± 0.2mm; Slat length 2.4 meters Straightness ± 0.5mm Dia. of chip extraction duct 150mm*4pcs Dimension 2300*1800*1450mm Weight 2300kg Features: ·The frame adopts standardized profiles, which undergoes aging vibration and annealing post-welding, followed

[Related Keywords : CNC Woodworking Machinery, Wood Board Multi Cutting, Wood Plate Slitting, Multi Blade Rip Saw]

23m Aerial Platform Truck

• Min. Order:  

  1 Set

• Price:  

  US$ 37000

• Place of origin:  

  China

23M Aerial Lift truck for sale Basic functional security configuration: working truck can achieve platform load 200kg, max. height 23m, max. working amplitude 17m (100kg) 23M Aerial Lift truck (high altitude working truck) is new product of JIUHE group, set many function in one machine, specification, performance advanced than domestic same level products. Main features as follows: lower weight,

[Related Keywords : Aerial Platform Truck, Aerial working truck]

Automatic Garlic Peeling Machine Garlic Peeler Mchine

• Min. Order:  

  1 Set

• Price:  

  US$ 400 ~ 9000

• Place of origin:  

  China

• Supply Ability:  

  2000pc per month

17m3/min Matched air pressure 1.0MPa 1.0MPa 1.0MPa 1.0MPa Weight 180kg 350kg 450kg 560kg Dimension 1400*550*1340mm 1900*700*1460mm 2500*1000*1800(MM) 3800*1000*1800(MM) FOB Qingdao prie USD1950 USD3,860/set USD7,540/set USD10,510/set Garlic Splitting machine Item Model FB-400 Power 0.75kw Capacity 400kg/h Weight 100kg Dimension 690x710x1050mm FOB Qingdao price USD 1,050/set Item FB100

[Related Keywords : Garlic Peeling machine, Garlic Peeler, Automatic Garlic Peeling, Galiic machine]

JC590 DTH Drilling Machine

• Place of origin:  

  China

• Supply Ability:  

  30000 sets

Extension mm 1200 15 Feed Stroke m 3 16 Manufacturer CUMMINS 17 Electrical System 24 Volt 18 Compressor Pressure Required M³/min Φ≤115 11.3m2/min(1.4 Mpa) Φ≤140 13m2/min(1.4 Mpa) Φ≤165 17m2/min(1.4 Mpa) Φ≤165 21m2/min(2.4 Mpa) 19 Max. Travel Speed Km/h 2 20 Gradeability ° 24 21 Net Weight kg 6100 22 Shipping Length mm 6900 23 Shipping Width mm 2200 24 Shipping Height mm 2200

[Related Keywords : DTH Drilling Machine]

Crash Barrier Roll Forming Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

17m/min; 25-35 T/8 hours Certified with Multi-Patents; CE Certified, EUROPEAN quality standard Available prompt delivery The Working Flow of Crash Barrier Roll Forming Machine Uncoiler - Leveling device - Servo feeding device - Hole punching device - Ground pit/ over ground accumulating unit - Feeding and guiding unit -Roll Forming System - Post cutting to length - Output Automatic Stacker How Do

[Related Keywords : Crash Barrier Roll Formin]

Concrete Mixer with Lift JZC350-DHL

• Place of origin:  

  China

Concrete Mixer with lift JZC350-DHL Discharging Capacity 350L Loading Capacity 560L Lifting Bucket Capacity 200L Productivity 10-14m/h Bags of Cement per Batch 2 Bag Cement Drum Thickness 6mm Drum Size Φ1460x1760mm Rated Lifting Height 17m Engine Option Water-cooled JIANGDONG Diesel Engine ZS1100(16HP) Water-cooled CHANGFA Diesel Engine CF1100(16HP) Water-cooled CHANGCHAI Diesel Engine ZS1100(16

[Related Keywords : concrete mixer, concrete machine, concrete mixer with lift]

Electrical Connector JL32K4ZYB 150A Plug-in Explosion Proof

• Place of origin:  

  China

17M Drilling hoisting rope 76mm 52.2m 6*84WSNS+FC 1770MPa Hydraulic control system accessoriesFKQ6406 Tracheal cable connecting plate flat mat Latch: Panel Spark Arrestor Cover 80558-2 Detroit Diesel Parts Electrical instrumentation system * engine oil temperature sensor 0005555630 Hydraulic tank accessories F-1300 Safety valve piston rod 82777+30 VALVE,CHECK,.75NPT Ring SL225-10 50008-13-C5D SCR

[Related Keywords : Electrical Connector, JL32K4ZYB, Plug-in, Explosion proof]

Outdoor Right Angle LED Display

• Min. Order:  

  1 Carton

• Price:  

  US$ 800

• Place of origin:  

  China

Plate | 96*48 Module Size | 192mm×192mm | Level up degree | <1mm | Viewable Distance | ≥4m -100m Viewable Angle | Horizontal: 120°, Vertical: 120° | Screen Weight | 50kg/m2 | Driving Method | Constant current | Display Color | 17M~69G colors | Display Color | Manual/Automatic/Remote | Grey Scale | 256~4096 | Refresh Frequency | 300 Hz~2440Hz | Refresh Frame Frequency | 60Hz |

[Related Keywords : P5 led display, P5 led module, fixed led screen]

Squid Jig

x 6barbs KH-2 0.7m/m(36) x 7barbs KH-3 0.65m/m(42) x 8barbs KH-4 0.8m/m(47) x 7barbs KH-5 0.9m/m(47) x 8barbs KH-6 0.75m/m(52) x 11barbs KH-7 1.0m/m(48) x 8barbs KH-8 1.17m/m(60) x 8barbs KH-9 1.0m/m(60) x 6barbs KH-10 1.3m/m(66) x 7barbs KH-11 1.4m/m(70) x 7barbs KH-12 1.5m/m( ) x barbs KH-13 1.6m/m(92) x barbs KH-14 1.8m/m( ) x barbs KH-15 2.0m/m( ) x barbs

[Related Keywords : Squid Jig, Squid Hook, fishing equipment, fishing rod]

Two-processing Wood CNC Router GT-1325

• Min. Order:  

  1

• Price:  

  USD 1

• Place of origin:  

  China

• Price Condition:  

  FOB qingdao/ningbo

• Supply Ability:  

  30

to ensure the accuracy of the overall machine bed Specification: Performance Parameters X-axis travel 1600mm Y-axis travel 2500mm Dimensions 1650*3000mm Maximum operating speed 17m/min Maximum engraving speed 8m/min Spindle speed 24000r/min Run mode Stepper Working voltage AC380V/50Hz Run command G code, F / S command compatible Operating system NC-Studio system Feeding height 300mm

[Related Keywords : CNC TOUTER, WOOD CNC ROUTER, FURNITURE CNC ROUTER, CRAVING MACHINE]

(SELF-PROPELLED) Code No. WT-429SCD of SAND CARRIER (DREDGER) OVERALL LENGTH 56.43M.

• Place of origin:  

  Japan

17M CARGO HOLD SPACE: 16.5M X 8.2M X 5.2M = 703.56M3. (ABOUT 1,055 TONS) BOW THRUSTER: 1 MATERIAL OF HULL: STEEL DATE OF LAUNCH: JUNE 1988 REGISTERED GROSS TONNAGE: 447 TONS CRANE MAKER AND MODEL: SKK-250GDA CRANE ENGINE MAKER: "MITSUBISHI" MODEL S6A2-MPT CRANE BOOM LENGTH: 24M GRAB BUCKET CAPACITY: 3.5M3(ONE UNIT) ORANGE PEEL BUCKET CAPACITY: 2.5M3 (2 UNITS) *ONE FOR SMALL STONE & ONE

[Related Keywords : SHIP, VESSEL, SAND CARRIER, DREDGER]

Cutting Edges/Blade/End Bits

• Min. Order:  

  1 Piece

• Price:  

  US$ 10

• Place of origin:  

  China

• Supply Ability:  

  10000 PCS per Month

17M-71-21930 Komatsu Cutting Edge 17M-71-21940 Komatsu Cutting Edge 17A-72-12221 Komatsu Cutting Edge 17A-71-45210 Komatsu Cutting Edge 17A-71-45220 Komatsu Cutting Edge 17A-71-45230 Komatsu Cutting Edge 17A-71-45712 Komatsu Cutting Edge 17A-71-45722 Komatsu Cutting Edge 195-71-A1654 Komatsu 195-71-37450 Cutting Edge Komatsu Cutting Edge 195-71-A1651 Komatsu 195-71-61550 Cutting Edge Komatsu 195-

[Related Keywords : cutting edges, blades, end bits, bulldozer parts]

P4 Indoor Full Colors LED Display

• Place of origin:  

  China

Model: PH4 Pixel pitch: 4mm Pixel structure: 1R1G1B LED type: 0605 Scaning method: 1/16 Brightness: >1400cd Power comsumption average: 350w Maxiimum power consumption: 1150w Module resolution: 32mm×32mm Module size: 128mm×128mm Density: 62500dots Best viewing distance: 2m-60m Screem body weight: 58kg Driving method: constand current Display color: 17M~69G Brightness adjustment: 256 le

[Related Keywords : indoor led display, out door led display, nice quality led display, nice price led display]

Wind Power Generator

• Min. Order:  

  10 sets

• Price:  

  USD 21000

• Place of origin:  

  Korea

• Price Condition:  

  FOB incheon

• Supply Ability:  

  500set/sets per 2 months

17m/s) Endurance Wind Speed 60m/s Weight(kg) 120kg Voltage 220V/60Hz Rotor airfoil Horizontal axis type Down-Wind Generator type Synchronous. Gearless Work temperature -40~+50°C Hub Heigh 10.5M Specifications Excellent Safeness The "Electronic Control Brake" stop the device on over 17m/s high wind rises (Like Hurricane, Gust etc.) ＊Japanese Products OKURA Disc Brake installed RUN Despit

[Related Keywords : Wind Power, Renewable, Energy, wind turbine]

Gold Washi Taped Paper Pre-taped Masking Film

• Min. Order:  

  2000 Roll

• Price:  

  US$ 0.5 ~ 5

• Place of origin:  

  China

• Supply Ability:  

  60000rolls/day

Gold Washi Tape Pre-taped Masking Film 550mm x 20m 550mm x 33m 600mm x 20m 900mm x 20m 1100mm x 25m 1100mm x 33m 1200mm x 20m 1400mm x 25m 1800mm x 33m 2100mm x 20m 2400mm x 20m 2700mm x 16m 2700mm x 17m customized sizes are available Contact ： Mr. Michael Li Oriental Commerce Co., Ltd

[Related Keywords : pre-taped masking film]