Min. Order:
1 Set
Price:
US$ 4000
Place of origin:
China
continuously adjusted within the range of 10-300 microns, covering the entire water volume range of 24 liters per minute. It is equipped with a high atomization and large flow spray disc as standard, suitable for different working scenarios such as orchards and large fields, and at the same time, it improves the service life of the nozzle. The innovatively developed MCRFF mist counter-rotating ho
[Related Keywords : Agricultural plant protec, pesticide spraying drones, fertilizing drones, airvehicle]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Place of origin:
China
360° rotation angle. Compared to four-wheel models, it offers irreplaceable advantages in maneuverability. Screw Compressor Screw air compressor is a widely used compressed air equipment in industrial production.It has become one of the essential equipment in many industries due to its high efficiency, energy saving, stability and reliability.This article will provide an in-depth analysis of the
[Related Keywords : air compresspr]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
501 - 1000
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
Price Condition:
FOB TianJin
continues operation. 6. Cleaning pump provided for avoiding solids accumulation in the cuttings dryer Technical Parameters Drum Diameter Max. 720mm Speed 820 r/min Separation factor 360 Main drive power 55KW (75HP) Oil pump motor power 120W (0.16HP) Fuel tank capacity 60 (L) Treating capacity Max 30-50 t/h Efficiency after drying ≦5% Screen aperture 0.25-0.5mm Explosion-proof standard ExdIIBt4
[Related Keywords : cuttings dryer for drilling, drilling cuttings dryer, drilling waste management dryer, supply cuttings dryer]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Unit
Price:
US$ 26000 ~ 45000
Place of origin:
China
Supply Ability:
500units/month
rotation 160° 160° Vertical jib rotation 133° (+ 79° /- 54°) Turntable rotation 360° continuous Turntable tailswing 1.41 m 4 ft 7.5 in Drive speed - stowed 4.8 km/h 3.0 mph Drive speed - raised/extended 0.3 m/s 1 ft/s Gradeability - stowed 45% 45% Turning radius - inside 2.40 m 7 ft 9 in Turing radius - outside 5.50 m 18 ft 2 in Controls 12V DC proportional Tyres 355/55D 625 Power Power so
[Related Keywords : Wheeled telescopic lift, JLG Boom Lift, Telescopic Boom Lifts, Used Boomlift]
Business Type
Supplier
Location
Henan, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 90000
Place of origin:
China
Supply Ability:
20
rotated 360 degrees in the forward and reverse directions during the wire feed process. Product advantages 2Achieve Multiple angle forming and cutting, etc.,in order to facilitate the completion of the various types of spring samples and production you require. Wide range of applications: electronics, toys, electrical appliances, sports equipment, cars, tableware, supermarkets, stationery, appara
[Related Keywords : Garage DoorSpring Machine, Torsion Spring Machine]
Business Type
Manufacturer
Location
浙江, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
10 Set
Price:
US$ 20 ~ 30
Place of origin:
China
This construction laser level utilizes a laser beam to provide a horizontal reference line, which is essential for a variety of tasks on construction sites. Single measurement, continuous measurement, area measurement Alarm when the slope angle exceeds 3 Self-leveling time:less than 5s Horizontal line and vertical lines can be switched automatically 360°rotating,outdoor and indoor use Can be u
[Related Keywords : Construction Laser Level]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
501 - 1000
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 35
Place of origin:
China
Supply Ability:
1000/Month
Description ● The table can be rotated 360° for rough adjustment ● Fine adjustment of ±10° is possible. The fine adjustment is driven by a fine-thread screw, spring return, high resolution, and no backlash. ● Precision shaft system design, adjustable shaft system clearance and good stability ● 360° marking on the circumference for easy reading ● There are connecting holes with stand
[Related Keywords : manual stage, Linear Stages OEM, OEM linear stage, optical instruments]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
100,000 pcs/day
360-degree rotation. The equipment is reasonably designed, has a solid frame, is easy to operate and maintain, is safe and reliable, and can complete the aluminum casting work of a heating plate within 15 seconds. Four sets of molds are continuously circulated, and the work efficiency is 2.5 times higher than that of skilled manual operation. Features and Benefits 1.The frame is designed with car
[Related Keywords : Casting Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Video
Min. Order:
1 Piece
Price:
US$ 600 ~ 1200
Place of origin:
China
Supply Ability:
1200pcs per month
continuous rotation Pan preset speed 100°/s Tilt preset speed 60°/s Pan control speed 0°~60°/S Tilt control speed 0°~40°/S Pan range 360°endless rotation Tilt range +90° ~ -90° Preset positions、Tracking 256 positions, 6 tracking, Preset accuracy±0.10 Cruise scan Preset cruise scan：support；360°auto cruise scan Azimuth information display ON / OFF Breakout memory support Lamp lig
[Related Keywords : Car PTZ Camera]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Rotation: 360°, Pitch: ±60°, Deflection: ± 60° Resolution 1D≥5mil 2D≥ 10mil Symbol Contrast ≥20% Physical parameter Weight < 7g Dimensions 26.15mmL * 12.09mmW * 13.85mmH Interface USB VCP / USB HID-KBW (Default) / USB HID-POS / TTL-232 Voltage DC +3.3V±5% Current Working: 170mA Sleeping: 800 μA 1d 2d Barcode Scanner Module Key Features and Benefits: ◆ The 1D and 2D Barcode Scanner
[Related Keywords : Barcode Scanner]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
USD 500,001 - 1,000,000
Video
Min. Order:
1 Set
Price:
US$ 123000~125000
Place of origin:
China
Supply Ability:
10000 Set/ Set per Month
360° continuous turret rotation 3.±80° platform rotation 4.CAN-bus controlled 5.One-button outrigger leveling 6.Radio remote control 7.Go home function 8.Full proportional control system 9.Auto leveling platform 10.Emergency hand pump 11.Hydraulic safety devices 12.Platform overload sensor 13.Removable aluminum platform 14.Real-time data display in the control panel 15.Double speed drive 16.R
[Related Keywords : spider lift, aerial work platform, man lift, spider lift for sale]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 15000
Place of origin:
China
continuous power to the UAV. KEY FEATURES Support flight altitude:110m, 160m or 220mInput voltage of Ground power module190-240VacOutput voltage of Ground power module600~810Vdc adjustableSize and weight of Ground power module450 × 360 × 286mm, 17.5KG.Output voltage of Air module50.5 ± 0.5VdcOutput power of Air module6000WSize and weight of Air module200× 150× 68mm,2200G. I,Typical Character
[Related Keywords : tether power station, tethering power supply sy, 100m tether station, portable power station]
Business Type
Manufacturer
Location
Arkansas, United States
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 10000 ~ 50000
Place of origin:
China
Supply Ability:
5 Sets per Month
360-degree rotating fork arm is required. The aluminum dross is pre-loaded into a semi-circular hopper, and the forklift is used to transport the hopper and dump the dross into the rotary furnace. Through the rotation of the fork arm, the aluminum dross is poured into the rotary furnace. Due to the 360-degree rotation of the rotary furnace, the heavier molten aluminum settles at the bottom of th
[Related Keywords : aluminium dross separator, Dross Ash Separator, Aluminium Separator Filte]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Set
Price:
US$ 1~10
Place of origin:
China
Supply Ability:
30 Set/Sets per Month
Rotation angle: 360º; X, Y movement: 15mm (7) Dimension & weight Marble base: 800×450×100mm Overall:(850×450×1000)mm 150kg (8) Operating environment No strong magnetic field, no vibration, no corrosive gas; Operating temperature: 20 ± 2℃; Relative humidity: 10-70% Features 1. High precision, high stability, high repeatability: fully meet the measurement requirements of test object. 1)The
[Related Keywords : Contour measuring machine, Profile Measurement test, Industry Measurement]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
501 - 1000
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
10 Set
Price:
US$ 339 ~ 619
Place of origin:
China
Supply Ability:
50000 sets per month
Category Item Product Parameters Camera parametersAi intelligent identificationSupport for bird identificationSensor Type1/2.8" Progressive CMOSfocal distance4.7-94mmLens magnificationHorizontal: 0-40 °/S, vertical: 0-40 °/S20 times optical zoom (optional 30 times)PTZ parametersSpeed rangeHorizontal: 0-40 °/S, vertical: 0-40 °/SAngle rangeHorizontal: 360 ° continuous rotation; Vertical: - 90
[Related Keywords : Bird repellent, bird deterrent, laser bird repellent]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Supply Ability:
3000 pcs per/day
rotated 360 degree, which makes the equipment can be used in any place. 6. Intuitive and simple handle design makes the doctor be clear at a glance, easy to operate. Endoscopic Linear Cutter Stapler Feature: •360 degree rotary dial：to meet each angle operation needs for resection， transection and creation in open or endoscopic surgery. • Adjustable knob：the angle of the joint head can b
[Related Keywords : cutter stapler]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Set
Price:
US$ 10000 ~ 400000
Place of origin:
China
rotating and tracking display in real time (3)Functions of interpolation of straight line and circular arc (4)Function of taper processing: As above (5)Function of processing different top and bottom abnormities parts (6)Auto-handle for short circuit and wire-break (7)Functions of memorizing: unexpected power off, it can continue the processing automatically; auto-stop after processing (8)Functio
[Related Keywords : CNC Wire Cutting EDM, drilling EDM, sinker EDM, CNC Machine Tools]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
10000000
Continuous 360° rotation, any angle position of lock function, revolving positing 90° or 180°Specification Capacity (kg)Roll Range(mm)TypeMounting ClassLong Arm LengthA(mm)Short Arm LengthB(mm) Weight(kg)Effective Thickness ET(mm)Horizontal Center of GravityHCG (mm)2000250-1300RCP20F-001AII 8255706771972872000250-1300RCP20F-001BIII 8255706902373252000630-1300RCF20F-002AII8255706671972822000630
[Related Keywords : Paper Roll Clamps, Forklift Attachments, Fork Clamps]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 182.99 ~ 219.99
Place of origin:
China
360°rotation, interpupillary distance 54-76mm bilateral vision adjustment 5 diopters. Objective: 0.7X-5X continuous zoom, objective zoom ratio 1:7.1 to ensure image surface focus. Auxiliary objective: 0.5X, 0.7X, 1.5X, 2X are available as options. Magnification: 7X-50X, optional eyepiece and auxiliary objective can be expanded to 3.5X- 270X, continuous zoom. Working distance: 100MM. Focus bracke
[Related Keywords : Electric Microscopes, Soldering Microscope, Mechanic]
Business Type
Supplier
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Place of origin:
China
Specifications Unit Parameter ◎ Capacity 1. X-axis direction movement (left and right of worktable) mm 820 2. Y-axis direction movement (front and behind the pallet) mm 500 3. Z-axis direction movement (up and down spindle head) mm 550 4. Worktable rotation angle (B-axis: Milling mode) degree ± 130 5. Worktable rotation angle (C-axis: Milling mode) degree 360 6. Distance from centre line of th
[Related Keywords : BMC500TV, Milling Turning Cente, 5-axis]
Business Type
Manufacturer
Location
Shaanxi, China
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Competitive 360 continuous rotation products from various 360 continuous rotation manufacturers and 360 continuous rotation suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
