Compression Wholesale

Compressed Air Water Remover - WELL AIR

• Place of origin:  

  Korea

Compressed Air Water Remover "WELL AIR" No Filters No Maintenance No Power Supply Water removal efficiency : 99.9% No CFC gases As much as 99.9% of water is removed from the inside of air tubes by our own special collision separation technique! WELL AIR is a revolutionary air compression cleaner that uses absolutely no filters or other components. Our own proprietary collision separation techniq

[Related Keywords : air water remover]

Tensile & Compression Tester

Features This tester is used for tensile, compression and bending testing other physical properties of marerial like plastic, file, rubber, textile etc. As for measurement and indication, a load controlled by PC.

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Spring Mount

• Place of origin:  

  Korea

- As a type of FSL series, it uses SMA2 type (static deflection of 50mm) and prevents damage and distortion of the equipment and pipe. The upper housing (compression plate) has a restrain bolt and level bolt, while the CR-type acoustical non skid pad on the bottom is to prevent the transfer of high-frequency vibration). - Though it has same features as FSL2 type, it uses a spring with the static

[Related Keywords : vibration control]

ELECTRONIC HAMMER SYSTEM Electric Vibration & Impact Device for Hopper & Silo Flow Aid

• Place of origin:  

  Korea

FASCOENG ELECTRONIC HAMMER SYSTEM is an electric vibration and impact device designed to solve powder flow problems such as bridging, caking, and clogging in silos, hoppers, bag filters, and chutes. Using electromagnetic resonance, it generates strong vibration and impact without compressed air, ensuring stable and efficient material discharge. It replaces traditional air knockers, magnet hammers

[Related Keywords : electronic hammer, vibration system, flow aid device, hopper silo blockage]

Spiral Wound Gaskets

• Place of origin:  

  Korea

Spiral wound gasket is a type of semimetallic gasket, rationally designed to provide a high performance in use at high temperature and pressure. It is equipped with an ample compressibility and an increased demand has been seen in these years because of the merit that a gasket seating stress can be controlled by an optimum compression thickness. It is widelyused at process line and lines handling

[Related Keywords : semi metallic gasket, GASKET, SPIRAL WOUND GASKETS]

HDPE Chemical Pump

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Application Fine Chemical Industries Petrochemical Industries Pollution Control Industries Shipbuilding Industries Food Industries Semiconductor Industries Other Industries Feature This is the compress molding product made by superhigh pressure, 900kg/cm2( The forming equipment of P.E. pump's resin injection, Patent 0260774) We have been making efforts to reduce defects and find a worldwid

[Related Keywords : pump, chemical pump, acid fine chemical, industries petrochemical pollution control]

Ultrasonic Washer for Fruits and Vegetables

• Place of origin:  

  Korea

compression waves in the water, which tear the liquid apart, leaving behind many millions of ‘microscopic voids or partial vacuum bubbles’ (Cavitation). These bubbles collapse with enormous energy, high temperatures and pressures, but they are so small that they do no more than clean and remove surface dirt and pollutants. This action also penetrates blind holes, cracks, and recesses,

[Related Keywords : ultra sonic, Washer, Fruits, Flip]

Automatic Mold Taping Machine

Compressed Air: 5 Bar (Oil & Moisture free) Dimension -TPM2000: 870mm x 850mm x 2160mm (W x L X H) -ATM1000: 883mm x 865mm x 2160mm (W x L X H) Thickness Measuring Equipment Type CTM-1000 The equipment for the precise thickness measurement of the assembled mold. It is recommended to use for the distance compensation in between the front and back mold at TPM & ATM machine. Mold Diameter Applica

[Related Keywords : Automatic Mold Taping Machine]

Nitrogen Generaotr / N2 Generator

• Place of origin:  

  Korea

NITROCELL (CN-M40 Series) Type CN-M40... N2 generator is adoping of nitrogen membrane and the durability is excellent. Especially this products do not require electricity. Besides this products need to have only compressed air though the compressor or the air pipe line at the various feilds and each site. Purity : 95% ~99.5% Flow : 18 LPM ~ 272 LPM Pressure : 0.5 MPa ~ 0.8 MPa ▶ Improvement of

[Related Keywords : Nitrogen Generator, N2 Generator, N2, Nitrogen]

Welding Coupler

• Place of origin:  

  Korea

compressive load. By the way, if the rebar is shaken by external force like earthquake and then lengthened by over 0.3mm, the concrete comes off so that it can’t endure compressive load any more. In this case, resultantly, the apartment falls down or collapses. Our welding coupler that is described so far belongs to standard type. We have one more type of welding coupler. It’s flux type. The

[Related Keywords : welding coupler, rebar, Seismic-risistant rebar, coupler]

Spring

• Place of origin:  

  Korea

• Price Condition:  

  FOB Busan, Korea

compression springs. Processing scope is Dia.0.05mm~10.0mm Tolerance by characteristics can be controlled within 5% 2. Compression coil springs *Compression springs make the best use of the coil in general. It is easy to design and manufacture and its cost is economic. It can be use depend on your purpose. It is possible to process within Dia. 0.05mm ~ 10mm and tolerance can be controlled within

[Related Keywords : Coil, spring, compression, damper]

Gas Spring

Industrial Gas Spring Industrial Gas Spring that uses nitrogen gas has general specific characters of spring, long stroke, small repulsive force, lifts big loads with small units, allow speed control in compression and can be used in a variety of application. Industrial Gas Spring also ensures stability compared to plate spring and coil spring. KOBA provides customized industrial gas spring for s

[Related Keywords : gas spring, industrial gas spring, pull type gas spring, free lock gas spring]

Special Adhesive Binder for Making Iron Ore Slime Briquette

• Place of origin:  

  Korea

Application: Iron Ore Slime 1. Recycling iron ore slime 2. Effective waste management 3. Cost-Saving by recycling by-product 1. Powder type binder for Iron ore slimes 2. Reasonable price compared to other binders 3. Excellent early-age strength Compressive strength: 100kgf/cm2 min. 4. Natural drying or hot air dry are available 5. Excellent heat-resistant strength at 1000℃ min. We are also sel

[Related Keywords : binder, iron ore slime, briquette]

Engine oil changer(SY-ODC100)

ENGINE OIL CHANGER SY-ODC 100 This is a machine, makes inner glass tube vacuous by using of compressed air, and makes engine oil sucked in the inner glass tube in order to exchange engine oil cleanly and quickly. If the user uses a funnel that height is adjusted freely, he is able to directly exchange engine below the engine part. Feature It is operated by air The pipe of drain can be pull to 16

[Related Keywords : automobile oil changer]

Benchtop Hydraulic Press

• Min. Order:  

  1

• Place of origin:  

  null

• Price Condition:  

  FOB Busan

The HHP series is an affordable line of standardized benchtop hydraulic presses within a 1-30 ton capacity range. All HHP Series presses offer high-speed, high-precision performance. They are very suitable for, but not limited to; assembly, compression, punching, trimming, blanking, stamping, and coining applications. These standardized systems can also be modified for specific applications that

[Related Keywords : Benchtop, Hydraulic press, assembly, caulking]