Mechanical Wholesale

Heavy Machine Parts

• Place of origin:  

  Korea

Heavy machine parts Used as mechanical and repair parts such as bulldozer, straight dozer, tilt dozer, angle dozer, bucket dozer, motor grinder, loader, scraper, dragline, breaker, Crusher, drill, youthyl, Earthgogger, crawler, jumbo reel, etc.

[Related Keywords : repair parts, construction machine, heavy machine]

Rotary Joint / Rotary Union / OR6505

• Min. Order:  

  1pc

• Place of origin:  

  Korea

• Price Condition:  

  EXW Busan

Reference http://eng_rotary.kwangjin.com/rotary_list/list2.asp?code1=01&code2=21 e-catalog for KJC Product http://ebook.ec21.com/joint/default1.html * OPERATION CONDITIONS 1) Max pressure : 10 Bar (150PSI) 2) Max speed : 1,000 rpm 3) Max Temp : 100C (210F) 4) Media : Air * FEATURES 1) For Tire Mold & Press Clutch 2) Low Friction at high speed rotation by mechanical seal structure

[Related Keywords : Rotary Joint, Rotary Union, OR6505-10A, OR6505-15A]

Lever Hoist, Lever Block

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Mechanical Load Brake : Brake can hold a full capacity load stationary in any position. Load is not transferred back to handle advancement Hook : All hooks are drop forged, heat treated steel with spring type latches. Both hook rotates 360° for easy rigging Load Chain : Electric welded G80 alloy steel chain is heat treated for wear resistance and strength. Accurately and uniformly sized to se

[Related Keywords : Lever Block, Lever hoist, Other Manufacturing, lifting]

Oil Thrustor Brake

mechanical friction, this also make the braking motion smooth and quiet. We have manufactured the cylinder out of specially purchased material which we can "HONE" to a high surface finish, this prolongs the life of the cylinder and the brake. To achieve a perfectly clean hydraulic system, all thrustor parts are pressure cleaned in our thrustor cleaning machine. Our leakproof type thrustors are th

[Related Keywords : TH Elema Eng, AC Magnetic Brake, Oil Thrustor Brake, Clipper Brake]

Special Purpose Reactor - Polymerization Reactor

• Place of origin:  

  Korea

Mechanical Engineer), pressure vessel standards. - Design and manufacture according to KGS and KOSHA. Accurate equipment - Improve process time and equipment efficiency by installation of heater - Maintain constant temperature by internal/external insulation - Improve safety through the multi-safety devices Customized engineering - A variety of types and specification for customer - Diffe

[Related Keywords : Autoclave, ASME, Pressure Vessel, Polymerization Reactor]

Cash Dispenser (For 2 Denomination)

mechanical double -- detect mechanism 3) To implement mold guides and paths to minimize jam occurrence 4) To maximize convenience in maintenance or clearing by opening -- guide structure 5) To realize so compact and slim size to be easily applied to even -- small space 6) To speed at a rate of 3.5 banknotes/sec Product Specification ==================== - Dimension : 310.2(D) x 360(H) x 266.7(W)

[Related Keywords : Cash Dispenser, Module]

Absorption chilling/Heating Unit

Features Easy to control by MICOM (Self-Diagnosis) Inverter Control guarantees stable capacity according to Heating/Cooling load High performance mechanism is equipped with High-Vacuum, Spray-Nozzle, Ceramic Inserting in High Temp, Generator to protect from leakage. Data Processing & Remote Control by Computer Optimal solution pump control

[Related Keywords : airconditioner, heating unit, cooling unit, industrial cooler]

2. Paper Envelope Converters

1) Mechanical Die Cutter FEATURES : Dual pressure operation and stepless pressure control. One Piece Cast Iron Frame. convinient knife changing system, No Carbon Electronic clutch and high accurate Worm Gear Box. Hard-chrome plated table, table slot covering, optical Cut-line indicator. Digital display available and possible to choose one of three units; Metric, Inch & Shaku. Two hand cut releas

[Related Keywords : Mechanical Die Cutter]

MPA Flowmeter (MPA)

Tubes ㆍAccuracy of discharge coefficients(Cd) is ± 0.2% of rate ㆍwithin 12:1 range ㆍCan be used with clean liquid, gas and steam ㆍPermanent pressure loss is much lower compared to ㆍOrifices ㆍHighly resistant to sesismic or mechanical vibration ㆍWafer style body makes it easy to install Pipe Size 3∼24" Application Liquid, gas or steam

[Related Keywords : Flowmeter]

HDPE Chemical Pump

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Mechanical SealSIC/Carbon, Unbalance, Rubber:Bellows Type Flange KS 10kgf/cm2(JIS, 10kgf/cm2), FF Type Bearing Lubrication Oil bath Type Bore 32~150mm Selection Chart Section Drawing-1 Sectional Drawing-2 Outline Dimensions Deal Drawing Precautions before using : Warning Please fix pump and motor with coupling. after confirming the motor's rotation direction is equal to it marked on the pumpIncor

[Related Keywords : pump, chemical pump, acid fine chemical, industries petrochemical pollution control]

Compressed Air Water Remover - WELL AIR

• Place of origin:  

  Korea

mechanical systems, due to the WELL AIR's space-saving design. No CFCs : Environmentally friendly, since no ozone-depleting CFC gases are used. Flexible AIr Pressure : Accommodates a wide range of air pressure : 1-10.2kgf/cm2 WELL AIR Performance Test Water removal rate Water removal rate 50L/min 100L/min 200L/min 300L/min 400L/min 500L/min 600L/min Pressure 3kgf/cm2 99.9% 99.9% 99.9% 99.9% 99.9

[Related Keywords : air water remover]

Robot Dress Pack System

• Place of origin:  

  Korea

• Price Condition:  

  FOB

mechanism, any direct contact is eliminated in installatoin so that robot teaching can be easily implemented. 2. Prevents the hose and cables inside dressing pack from twisting while turning on the R-axis. 3. The simple main base is designed for easy installation 3. Cables are terminated with plug type connectors for quick installation. Full Length 6m Flexible Tube Length 2m Flexible Tube Spec.

[Related Keywords : Welding Robot, Welding System]

Soldering Process

Hot blast circulation type This pin carrier type reflow furnace uses downflow hot blast circulation as the heating method. This method provides uniform heating across printed circuit boards, allowing extremely reliable soldering. Available as an option is an air cylinder-based automatic open/close mechanism for the top cover and housing, offering improved ease of operation and maintenance. The o

[Related Keywords : Soldering Process, KNIH]

Fatigue Tester

Features In general, if machinery and structure except some specificate are influenced by repeated load at any rate, even though size of load if under yielding point. There are frequent occasion of break down by repeated and accumulated fatigues. This device adapted Hydraulic Servo Mechanism by Closed loop System is fatigue testing device which is possible naturally to examine Data Acquisition an

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]

Micro NC Roll Feeder

And willing to Smallsize &Lowcost. Use the weak material with adjustment feeding roll(YMNRF Type) Specification Model Coil Width (mm) Coil Thickness (mm) Max. Feed Length (mm) Servo Motor (w) Release YMNRF-100S Max100 1.6 999.9 500-1000 AIR Cyl' or Mechanical YMNRF-150S Max150 1.6 YMNRF-200S Max200 1.6TX200 2.3TX100 YMNRF-300S Max300 1.6TX300 2.3TX100 YMNRF-400S Max400 1.6TX400 2.3TX100

[Related Keywords : roll feeder]