Testing Wholesale

Coldplate

• Place of origin:  

  Korea

Coldplate with FSW(Friction stir welding) Method : Friction stir welding Material : Al series(6061,6063,7075 etvc) Post processing : Anodizing Additional processing : Machining center. High strength, high weld efficiency, stable quality production using high phase-state bonding FSW method. Quality assurance for leaks through leak testing Taeyung Has facilities and technology for the entire proce

[Related Keywords : coldplate, FSW, machining, computer]

Compressed Air Water Remover - WELL AIR

• Place of origin:  

  Korea

Test Water removal rate Water removal rate 50L/min 100L/min 200L/min 300L/min 400L/min 500L/min 600L/min Pressure 3kgf/cm2 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 5kgf/cm2 7kgf/cm2 Water removal rate Water removal rate 700L/min 800L/min 900L/min 1000L/min 1100L/min 1200L/min Pressure 3kgf/cm2 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 5kgf/cm2 7kgf/cm2 Test method : Air of 100cc in volume containing

[Related Keywords : air water remover]

Generator Control Panel (GCP-PSL1)

test, buzzer, emergency stop switch 3. Structure Size: 500mm x 300mm x 250mm(width, length, height) Color: Black color, black dark blue Cover: 2.5y. 7/2 4. Feature Controls engine stop, oil pressure, over speed, over temperature Controls engine abnormality- Lamp lighting, alarm sound Controls starting failure- Lamp lighting, alarm sound, starting stop 3 Crank attempts with interval 7 sec crank

[Related Keywords : generator control panel]

Elec Driven Water Tester

DWT type pump is one of high pressure pump for water pressure test unit. It is used extensively in shipbuilding, iron and steel, power generation, construction, chemical plant & etc. Recently this industry these industry is getting high pressured conspicuously so it requires efficiency of high demand. As a horizontal 3 stage pump, it has good stability and high efficiency and attached regulating

[Related Keywords : Water, Tester, Water Tester]

Concrete Curing Autoclaves

• Place of origin:  

  Korea

test for safety of Portland cement.(KSL 5107) Steam curing for PHC(Pretensioned spun High strength Concrete piles) Creating ALC(Autoclaved Lightweight Concrete) Durability test of ceramic products including Ceramic tiles Properties of ALC Fire resistance - By the use of resistance materials, there is no toxic gas in case of fire. Hence it is suitable for high building and apartment complex. Ins

[Related Keywords : Concrete Curing Autoclaves]

DMT 240H

RELIABLE SAFETY OPTIMUM RUNNING EASY MAINTENACE MAIN FEATURES Robust cast iron for optimum marine use Hydraulic actuated and oil-cooled ...clutch discs. Case hardened and precisely ground ... gear teeth Same reduction ratio in ahead and astern position Smooth and perfect shifting of selector lever Fully work tested for any situation in sea< Device for emergency "GET HOME " function

[Related Keywords : transmission, marine transmission]

Biomass Wood Pellet Making Plant

• Min. Order:  

  one plant turn-key base

• Price Condition:  

  FOB

test. *Our pellet making systems are different compared to conventional pellet systems Drying method; A conventional saw-dust dryer are large in size with rotary drum drying. This drying type needs a heavy energy input and makes a longer drying time. The instalment area for the drying equipment is large. our drying systems ae using our new tech compact conductive drying technologies. our drying's

[Related Keywords : pelleting]

Jhci-051b

Features Model JHCI-051B Use UV Cure M/C for R&D Power : 500w Lamp : No. 1 Lamp Name : Mercury UV Lamp Cooling : Air Cooling Power Supply : 1Ø, 220V, 60Hz Size(W x D x H) : 370 x 385 x 600 Curing Width : 100mm Reflector Focusing : Cold Mirror Option : IR Filter Applications Simple manufacturing, For test use Work even in a small space Available to control hardening hours with

[Related Keywords : uv cure machine, uv cure, coating line, dispenser]

GRP Water Tank(Grp Panel Tank)

tests. Bending strength (MPa) 170~220 117.6~161.7 64.2~156.8 Other companies' products are harder, containing about 40% filler, negatively influencing both impact and repetition strength tests. Water absorption coefficient Below 0.1% Over 0.3% 0.20.3% The superiority of the initial strength of GRP products is additionally evident in its durability over the long term. The Different Fibreglass Usin

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

Radiation Survey Meter-300E

• Min. Order:  

  100

• Price:  

  USD 1000

• Place of origin:  

  null

• Price Condition:  

  FOB Busan

• Supply Ability:  

  2 Months

ILJIN Portable Radiation Survey Meter. - RSM-300E Survey Meter installed two detectors, one for high radiation and the other is for low radiation field.. - Range of GM-tubes in RSM-300E - Detector for low radiation : from backgroung level to 3 mSv/h. - Detector for high radiation : from 2 mSv/h to 1 Sv/h. - Calibration factor setting method : - Every RSM-Series are tested and calibrated as Facto

[Related Keywords : Radiation Survey Meter Measurementequipment]

1. Paper Cutter

1) MONITOR AD Paper Cutter FEATURES : 10" color monitor PC-technology WINDOWS XP Embeded Nearly unlimited amount of programs Nearly unlimited amount of steps On Screen Check System Measure positioning 1/100 mm exactness Actual machine processing status and error message via clear test display Duplicating of programs Alphanumeric keyboard for placing order name and additional text Splitting of cu

[Related Keywords : paper cutter]

Latex Coating Machine

• Min. Order:  

  1 set

• Place of origin:  

  Korea

• Price Condition:  

  FOB Busan,Korea

Labour needed: 4~ 6 person. Automatic latex feeding device for continuous coating. Auto control: PLC Touch screen auto control. Option: Auto stripper. Payment : by LC orTT . Delivery : within 60 days after order confirmation. Installation& test running : 15 days needed with 4 engineer. *Factroy condition 1.Electric : 380V/60Hz/4P 2. Height : 4,000mm , Length : 29,000mm , Width: 2,000mm

[Related Keywords : latex coating machine, dipping line]

INH/Inert

INH/Inert Convection type oven with air tight chamber. Summary Non air process, such as the temperature testing, ceramic de-binding and so forth, can be performed with various gas injections, sealing inert gas inside. Purging to process gas at maximum temperature 600 degree C can maintain the oxygen concentration below 20 ppm. With the program controller of high capacity, 7 patterns & 140 segme

[Related Keywords : Passive Component, INH/Inert]

Refrigerator Tester

Test Room. Even described as the constant temperature and humidity. it may be used in wide range from at low temperature with low humidity to at high temperature with high humidity. In addition to that, It. Applied Standard JIC C-9607 ISO-8551 KSC-9305 Measured Items Cooling Capacity Test Cooling Speed Test Defrost Test Temperautre Uniformity Test Power Consumption Test Testing Range Temp.

[Related Keywords : refrigerator tester]

Rheo Meter

Features This latest tester is used to test the treatments and the characteristics of unvulcanized rubber according to KSM 6687. This tester is newly developed to make easy check of the data on monitor. All tested data can be stored at PC and it can be printed out whenever you need. Specifications Electric Source : AC220V 60Hz 2Kw Torque Range : 25, 50, 100 Lb-in Temp Range : 100~200℃ Test

[Related Keywords : Daekyung Engineering, UTM Tester, Fatigue Tester, Hardbess Tester]