Up System Wholesale

Prime Sterilized Water Manufacturing Unit

• Place of origin:  

  Korea

• Price Condition:  

  FOB

system As a digital control system for users, easy to operate. All the work from the selection of concentration up to the flow rate adjustment can be conveniently proceeded at once by simply clicking button. Fully automated system As a digital control system for users, easy to operate. All the work from the selection of concentration up to the flow rate adjustment can be conveniently proceeded

[Related Keywords : Sterilized Water Manufacturing, Sterilized Water, Water Manufacturing]

TAD-233 Can Pump

• Place of origin:  

  Korea

is a suitable system for high viscosity liquid dispensing to integrate can pump with TAD-233 Thin film cell module edge sealing PCP-200-60 BOOSTER PUMP It is a 200ℓ automatic conversion can pump system for sealing thin film type solar cell module edge. ▶ Continuous operation is possible with reduced pulsating phenomena by changing the can pump when liquid of one can pump is used up.

[Related Keywords : can pump, high pressure pump, ram pump]

Compressed Air Water Remover - WELL AIR

• Place of origin:  

  Korea

up of grease on the pipes' inner walls. This is even possible with WELL AIR's compact size and affordable cost. WELL AIR has arrived with a unique new standard that promises to herald a real Air Revolution and wipe clean the water problems that other compressed air systems still leave behind. Features No Filter : High performance always assured, since WELL AIR uses no filters or other consumables

[Related Keywords : air water remover]

Concrete Curing Autoclaves

• Place of origin:  

  Korea

system enable more convenient research Easy maintenance - A variety of measurements facilitate analyzing operating conditions. - Easy assembly/disassembly and clean up - Quick response to customer request through customer service team. Dimension Model CT 200 CT300 CT400 CT500 CT600 Working Vessel Dia Ø200mm x 200mm Ø297.9mm x 250mm Ø400mm x 500mm Ø500mm x 500mm &O

[Related Keywords : Concrete Curing Autoclaves]

GRP Water Tank(Grp Panel Tank)

up with water : Less than 1% form Water tank Height Wind Force Less than 60m/sec Earthquake Force Horizontal Intensity kh = 1/3G Snow load 200kg/cm3 , Snow fall less than 1M Ilumination Rate Less than 1% Out-fit Force No leakage under condition of vertical 100Kg after install of 100A Fitting Water Temperature Usable temperature : Under 30°C Limited temperature : Under 40°C Range Range Ava

[Related Keywords : grp water tank, water tank, grp tank, water tanks]

Pioneer 300 series

system Fully automated image analysis & data calculation by computer. Contact Angle & Surface Energy Applications Coating assessment of the HMDS process. Evaluation of surface cleanliness processing Surface treatment for wafers Detection of organic contamination for wafers Specification Contact Angle 0~180 °, ± 1 ° accuracy Max. Sample size 300 mm Wafer (up to 12 inches wafer

[Related Keywords : Auto, Contact, Angle, Analyzer]

2-3. Semi Automatic Flatbed Die Cutter

Special Features ; Job Set Up without Chase for Quick Change Over (Option : Chase type also available) Model : Diemaster-SA-1300, 1500, 1600, 1800, 2100 (S), (ST), (FST) Note. SA; Semi Auto, (S); Standard, (ST); Stripping, (FST); Full Stripping Size : 1300mm upto 2100mm Speed : 2400 ~ 3600 Sheets per hour (Variable depending on size) Feeding : Manual Feeding Delivery : with Auto Elevation Un

[Related Keywords : Platen Die Cutter]

Ultrasonic Plastic Welding Machine

Ultrasonic Welder Model : MT-1030AC Wide range automatic tuning system 15 KHz ± 350 Hz 20 KHz ± 500 Hz 30 KHz ± 700 Hz Maintaining an optimized condition with tracking the change of frequency caused by wearing tool horn and increasing temperature while tool horn working. Saving working frequency & displaying actual frequency It is available to keep the optimized condition osc

[Related Keywords : welder, engineering, machine]

Roller Hearth Continuous Furnaces

system with a special ceramic Hearth Roller enables keeping clean inside of the furnace preventing from dust. With the heatproof glass muffle, the cleanliness in side of the furnace is further improved. The MOLDATHERM heater enables quick heating up, quick responsiveness, and minimizing heat dissipation loss with easier maintenance. Doubled production efficiency by multi transfer system. Our o

[Related Keywords : Roller Hearth Continuous Furnaces, RH]

A/C Calorimeter

CAPACITY : MAX 100,000KCAL/H(CHANGEABLE) TEMP RANGE: : -20°C ~ 60°C HUMIDITY : 5 ~ 95%RH AIR FLOW : 400CMM ACCURACY : ±1.5% REPEATIBILITY : ±1.0% Nozzle Type : ASME Testing Range EASY SET UP Data Acquisition System : Auto Data Couisition System Remote Controlling System Actual time Data Storing & Analysing and Reporting PLC/PID Regulation Nozzle Auto Open Type

[Related Keywords : calorimeter]

Check Weigher

Features Voluntary weight range setting function based on the absolute weight system Calibration & engineer control mode are protected by password not to be accessible to any person except an authorized person. Available to control a weighing time and interval according to product conditions in production lines. Dynamic adjust function can make a weight in-motion same as an actual weight weighed

[Related Keywords : Check Weigher]

Micro Component Inspection

• Place of origin:  

  Korea

inspection count per each LOT together with OK or NG status and the images in the database, it helps you to see information of the produced lot easily and provides a function that you can inspect and see the image of each crystal in real time through the data base. By setting up such a system, improvement of production efficiency and correct information delivery of each crystal are promoted.

[Related Keywords : Micro Component Inspection]

Remodeling, Modification, Up-grade

• Place of origin:  

  Korea

| Remodeling, Modification, Up-grade -. Description 1. Up-grade Material Improvement Major parts replacement, and part of the balance compensation Board Replacement and Software Back-up 2. Remodeling and Up-grade Customizing System and Sub-system Chamber and Assembly Parts 3. Delivery : 1 week ~ 4 weeks 4. Warranty : 1 Year

[Related Keywords : Remodeling, Modification]

Oil purifier

Features Adoption of "G-HIDENS System for high density (up to 1.01g/cm3) oil purifying" with high reliability Bowl structure excellent in separation performance Model layout matching the engine output, and a line-up of high-capacity models meeting the needs of large container vessels Discharge mechanism delivering high sludge discharge performance Semi-unit for main body with adoption of new

[Related Keywords : Oil purifier]

Extruder (PP Danline, HDPE)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

- Extruder for making synthetic ropes PP Danline extruder line HDPE mono filament extruder line Our extruder system consist of following units basically. A. EXTRUDER B. AUTOMATIC TEMPERATURE CONTROL PANEL C. DIE & NOZZLE D. QUENCHING BATH E. NO. 1 STRETCHING MACHINE F. STRETCHING BATH G. NO. 2 STRETCHING MACHINE H. TAKE-UP WINDER Please click here for full informations of Extruder.

[Related Keywords : Extruder PP Danline, HDPE yarns]