Adjustable Worktable Wholesale

Solar Panel Laminator for Lab

• Min. Order:  

  1 Set

• Price:  

  US$ 9000 ~ 10500

• Place of origin:  

  China

• Supply Ability:  

  10sets per month

(at the regulated set temperature value Unevenness of the worktable Unevenness≤300 μm/m²Air discharge speedCan adjust continuously within 0～50L/S Press of compressed air 0.5～0.8MPaLaminate timeabout 15min. Pumping time 4～5minCompressed air speed1-8L/S Work vacuum degree 80～20PaAmbient temperature0～50℃ Note: Customized specifications are available upon your requirements.

[Related Keywords : solar vacuum laminator, pv module laminator, solar module laminating]

Compression Molding Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 5000 ~ 1000000

• Place of origin:  

  China

worktable is movable Mold temperature control system Servo system Robot and automnation Sheetmetal cower, front and rear lift doors Blow/Vacuum Features: 1. The compression molding press for sale is a three-beam and four-column type, equipped with a master cylinder and a top cylinder. 2. It adopts button centralized control, has independent electric control and hydraulic system, and can realize s

[Related Keywords : Compression molding press, compression molding equip, compression molder]

Press Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 100000000

• Place of origin:  

  China

• Supply Ability:  

  10000 Sets/Year

worktable are connected with the machine body by bolts, and there is a blanking hole in the center of the worktable. The indenter is connected to the piston rod through a thread. The main oil cylinder is a double-acting piston-type oil cylinder, and the bottom of the cylinder is a closed-bottom integral structure. The piston head is installed in the cylinder body. On the outer ring of the piston

[Related Keywords : forging press machine]

New G800 CNC Gear Hub Machine with Automation Loading/Unloading Solution 8-10M Hobbing Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

worktable table mm 600 Maximum rotation angle of tool holder ±45° Distance from the center of the hob to the center of the table mm 70-470 Distance from the center of the hob to the table surface mm 165-615 Y-axis tangential travel mm 200 Maximum spindle speed (B-axis) r/min 110 B-axis motor power KW 22 Maximum table speed (C-axis) r/min 100 C-axis motor power KW 18 CNC axis linear coordinate r

[Related Keywords : 8-10M Hobbing Machine, CNC Gear Hub Machine]

Automatic Vertical Foam Cutting Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 8000 ~ 10000

• Place of origin:  

  China

worktable adopts manual operation, easy operation and high cutting precision. This type is also widely using in foam manufacturing. Not only apply to cutting foam/spone, but also PU, PE, PVC, and other soft materials cutting. EASY TO OPERATE The JK-FC02 trims and cuts foam blocks into requiring sizes with a vertical blade. Guide fence position is adjustable by hand wheel, and the table unitis can

[Related Keywords : Foam Cutting Machine, Vertical Foam Cutting, Vertical Cutting Machine, Automatic Foam Cutting]

2-Axis 5-Head Flat Brush Drilling & Tufting Machines WXD-2A5H03

• Place of origin:  

  China

General Introduction of CNC 2-Axis 5-Head Wood Brush Making Machine With Safety Cover WXD-2A5H03 1) This is a CNC 2-axis 5-head machine of the latest design, equipped with three drilling-heads and two tufting-heads. With six grippers holding six wood brushes on worktable, it finishes two wood brushes within a working cycle, which is twice that of a 2-axis 3-head wood brush making machine. If you

[Related Keywords : brush machines]

Automatic Stretching Machine

• Place of origin:  

  China

worktable and put the frame on. for oblique stretching, you can select rule for positioning, then laying the mesh on the table and clamping the mesh tightly by  pneumatic switch. press the start button, the high pressure chunk will clamp the mesh more tightly, the stretching process starts automatically. when stretching stopped, measure the tension, use accurate adjustment method if additional

[Related Keywords : Stretching Machine]

Worktable

Name: Worktable/Workbench Model: WT-162B RMK: with splashback two layers adjustable flat packi

[Related Keywords : catering equipment, cooking equipment, kitchen equipment, hotel equipment]

CNC Band Sawing Machine for H-beams

• Place of origin:  

  China

• Price Condition:  

  FOB

worktable (mm) 800 Range of the Sawing rotating angle 0~45º Feeding Speed (mm/min) Stepless Adjustment Main Motor Power (Kw) 7.5 Power of Rotating table motor (Kw) 0.04 Hydraulic system System pressure(MPa) 5 Motor power(kW) 2.2 Cooling system Pump flux (L/min) 100 Motor power (Kw) 0.25 Total Power (Kw) 12 Overall dimension (mm) 3550x2100x2700 3850x2100x2750 4050x2100x2850 Weight (kg) About

[Related Keywords : cnc H-beam sawing machine, cnc sawing machine, cnc beams sawing machine, sawing machine for beams]

Solar Panel Laminator Solar PV Panel Making Machine Yudiansolar Turnkey Solution for PV Module

• Min. Order:  

  1 Set

• Price:  

  US$ 85000 ~ 95000

• Place of origin:  

  China

• Supply Ability:  

  6sets per month

of the worktable Unevenness≤200μm/m² Air discharge speed Can adjust continuously within 0～50L/S Press of compressed air 0.5～0.8MPa Laminate time about 20min. Pumping time 5～7min Max. Laminate Thickness 28mm Work vacuum degree 80～20Pa Ambient temperature 0～50℃ Major Structure : Loading + Laminating + Laminating + Unloading Two sets of Vacuum Pumps, two sets of Heating Stations

[Related Keywords : solar panel laminating machine, PV laminator, solar Pv laminator, PV laminating machine]