Compressed Air System Wholesale

Buy Air-Cooled Screw Condensing Units

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

https://www.kendallcool.com/air-cooled-screw-condensing-units/ An air-cooled screw condensing unit is a type of refrigeration system that uses a screw compressor to compress refrigerant and condenser coils to dissipate heat from the refrigerant. It is called "air-cooled" because the condenser coils are cooled by ambient air rather than water. The screw compressor draws in low-pressure refrigerant

[Related Keywords : Air-Cooled Screw]

Sandblasting Room BLASTLINE

• Place of origin:  

  Germany

Parts of the system of the blasting cabin: - the blasting cabin - Workpiece entrance door - Operator door with a panel - lighting - rubber lining - sandblasting pot - Abrasives recovery system - pneumatically operated scraper blades - Abrasive container - Dust filter - Aftercooler - Lines / hoses - Steel construction - Main control panel Further you‘ll need a compressor and a compressed air tan

[Related Keywords : Sandblasting, surface treatment]

SF6 Recovery and Gas Refilling Device

• Place of origin:  

  China

• Price Condition:  

  FOB Shengzheng

• Supply Ability:  

  10 sets/month

compressed vessels; the vessel is clean inside without remaining particulates, with rust-proof treated inside and well painted outside; it is equipped with pressure gauge, high pressure monitor and relief valve and liquid level monitor; K. Gas retrieving system It is composed of air compressor, bumper, separator, filter, heat exchanger, safety valve, one-way valve, gas pressure gauge, vacuum ga

[Related Keywords : sf6 gas reclamation, sf6 vacuum evacuating, sf6 gas refilling, sf6 recovery]

Automatic Mold Taping Machine

System in Clean Bench Specification Applicable Mold Diameter -TPM2000: Ø70mm~Ø81mm -ATM1000: Ø76mm~Ø86mm Cycle time: 11sec~13sec Applicable mold base curve -Front mold: 0.5K~12K/Back mold: 0.5K~18K Tolerance of distance measurement system: ±0.04mm Electricity: 220v 1 Phase 50/60Hz, 660W Compressed Air: 5 Bar (Oil & Moisture free) Dimension -TPM2000: 870mm x 850mm x 2160m

[Related Keywords : Automatic Mold Taping Machine]

Nitrogen Membrane / N2 Membrane / Membrane

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Nitrogen Membrane Module(NC-MS Series) Type NC-MS ... The oxygen gas of the high permeability speed, permeate out first through vent port and the nitrogen gas of the low permeability speed as product gas, come out later through the end of hollow fiber, When the compressed air pass through the membrane. The principle is to make use of the difference of the permeability speed of gas in order to sep

[Related Keywords : Nitrogen Membrane, N2 Membrane, Nitrogen, Membrane]

Nitrogen Membrane / N2 Membrane /Nitrogen Generator

• Place of origin:  

  Korea

Miniature Nitrogen Membrane Module(NC-MF Series) Type NC-MF ... The oxygen gas of the high permeability speed, permeate out first through vent port and the nitrogen gas of the low permeability speed as product gas, come out later through the end of hollow fiber, when the compressed air pass through the membrane. The priniciple is to make use of the difference of the permeability speed of gas in

[Related Keywords : Nitrogen Membrane, N2 Membrane, Membrane, Nitrogen]

Kneader and Internal Mixer

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

Compressed air 0.8 MPa 0.8 MPa Consumption of air 40m3/h 55m3/h Max.pressure of vapour 0.7MPa 0.7MPa Pressure of outside cooling water 0.4 MPa 0.4 MPa Water consumption 20 m3/h 35 m3/h Power of motor DC 160KW DC 280KW Reducer NGW-MS, hardened tooth surface NGW-MS, hardened tooth surface Overall dimension 6830×1930×3800mm 8000×2600×4600mm Weight ~15000 kg ~ 25000kg Drivin

[Related Keywords : kneader, regenerated rubber machinery, equipment]

Truck Mounted Drilling Machine

system 32MPa4+4+1 32Mpa3+3+3+1 Compressed air/mud lines Dia. Φ76.2mm Nominal working pressure 20MPa Auxilary winch Jib boom stroke 1m Hoisting weight(retracted) 38kN Hoisting weight(extended) 20kN Hydraulic system pressure Rotary head rotating system 25MPa Normal drilling system 24MPa Fast hoisting system 32MPa Rig engine from CUMMINS Model QSX15-600 Power 447kW Speed 2100r/min Total weight 5

[Related Keywords : drilling machine, truck drill, gas drainage, coal mining]

Frame Type Wire Twisting Machine

• Min. Order:  

  1

• Price:  

  USD 12000

• Place of origin:  

  China

• Price Condition:  

  FOB shenzhen

• Supply Ability:  

  10 set per month

compressed-air line and related project not listed connector device. Needed materials for product testing Statements: We providing OEM/ODM service for customers,with professional Research&Development department,experienced designing work team. Products can be designed according to different structures and materials,every products with customized sketch and drawing,welcome to our company inves

[Related Keywords : twisting machine, twist machine, wire twisting machine, wire twist machine]

Box Tempering Furnace

• Min. Order:  

  1 set

• Price:  

  RMB 36000

• Place of origin:  

  China

• Price Condition:  

  FOB HeFei

• Supply Ability:  

  ex) 20 Set per Month

compressed density ≥220Kg / m3; inserts using scientific and reasonable method, this structure is rare in thermal bridge short circuit appears, it is to combine the two stacked flat production, air tightness is good, with a solid and reliable, easy maintenance, long life, energy saving effect, light weight furnace, furnace shell temperature rise is small. ZG3Cr18Mn12Si2N use made of heat-resis

[Related Keywords : Chamber Furnace, Furnace, box furnace, tempering furnace]

Box Tempering Furnace

• Min. Order:  

  1 set

• Price:  

  RMB 36000

• Place of origin:  

  China

• Price Condition:  

  FOB HeFei

• Supply Ability:  

  ex) 20 Set per Month

compressed density ≥220Kg / m3; inserts using scientific and reasonable method, this structure is rare in thermal bridge short circuit appears, it is to combine the two stacked flat production, air tightness is good, with a solid and reliable, easy maintenance, long life, energy saving effect, light weight furnace, furnace shell temperature rise is small. ZG3Cr18Mn12Si2N use made of heat-resis

[Related Keywords : Box furnace, Furnace, tempering furnace, box resistance furnace]