Digital Input Wholesale

Portable and Reusable PLC Programs

• Min. Order:  

  1 Set

• Price:  

  US$ 172

• Place of origin:  

  China

OverviewQuick DetailsPlace of Origin:Liaoning, ChinaBrand Name:GCANModel Number:GCAN-PLC-400Isolation level:Optocoupler isolation 500VCAN open baud rate(bps):1000K,500K,250K,125K,100K,50K,10KPDO mode:synchronization, looping,event-driven, pollingBus terminal module quantity:up to 32 modulesDigital I/O signal:256 input/outputAnalog I/O signal:64 input/outputConfiguration mode:automatic configurati

[Related Keywords : plc motherboard, plc control box, professional plc]

GCAN-PLC Supports CANopen/ Modbus RTU/ Modbus TCP, Can Be Used As Master or Slave

• Min. Order:  

  1 Set

• Price:  

  US$ 233

• Place of origin:  

  China

input24V DC (18~36V)Insert I/O module number32 pieces (at most 32*8 IO point)Dimension100mm*69mm*48mmWorking temperature, humdidness-40℃~+85℃, 0~90%RH, without condensationIP gradeIP20 Input and output modules IO Module Selection TableI/OTypeCharacteristicSignalChannelDigital inputGC-1008Digital input (PNP)24V DC8-channelGC-1018Digital input (NPN)24V DC8-channelGC-1502Counter(200kHz max)–2-

[Related Keywords : plc control unit, embedded plc module, expandable remote plc, safety plc modul]

China GCAN Modular PLC Programmable Logic Controller Manufacturer

• Min. Order:  

  1 Set

• Price:  

  US$ 172

• Place of origin:  

  China

input24V DC (18~36V)Insert I/O module number32 pieces (at most 32*8 IO point)Dimension100mm*69mm*48mmWorking temperature, humdidness-40℃~+85℃, 0~90%RH, without condensationIP gradeIP20 Input and output modules IO Module Selection TableI/OTypeCharacteristicSignalChannelDigital inputGC-1008Digital input (PNP)24V DC8-channelGC-1018Digital input (NPN)24V DC8-channelGC-1502Counter(200kHz max)–2

[Related Keywords : industrial programmable, expandable remote plc, safety plc system, professional plc]

Cheap PLC China Programmable Logic Controller Manufacturer

• Min. Order:  

  1 Set

• Price:  

  US$ 251

• Place of origin:  

  China

digital&analog IO modules and some other special modules. One main control module with max 32 IO modules (32*8=256 channels) Free progrm softwareSupport OpenPCS software, follow IEC 61131-3, the software is free with GCAN-PLC Without specialized downloaderGCAN-PLC can use common micro usb to complete debugging and downloading Total 2 communication modules Input and output modules packaging

[Related Keywords : low cost plc supplier, industrial parts, with RS23285 interface, high quality plc brand]

PLC Programmable Controller with CAN Bus Communication Capability Industrial Control Board

• Min. Order:  

  1 Set

• Price:  

  US$ 233

• Place of origin:  

  China

input24V DC (18~36V)Insert I/O module number32 pieces (at most 32*8 IO point)Dimension100mm*69mm*48mmWorking temperature, humdidness-40℃~+85℃, 0~90%RH, without condensationIP gradeIP20 Input and output modules IO Module Selection TableI/OTypeCharacteristicSignalChannelDigital inputGC-1008Digital input (PNP)24V DC8-channelGC-1018Digital input (NPN)24V DC8-channelGC-1502Counter(200kHz max)–2-

[Related Keywords : China plc supplier, high quality plc CPU, with Ethernet interface, easy to operate plc]

PLC Programmable Logic Controller GCAN-400/510/511 Industrial Control Board

• Min. Order:  

  1 Set

• Price:  

  US$ 172

• Place of origin:  

  China

input24V DC (18~36V)Insert I/O module number32 pieces (at most 32*8 IO point)Dimension100mm*69mm*48mmWorking temperature, humdidness-40℃~+85℃, 0~90%RH, without condensationIP gradeIP20 Input and output modules IO Module Selection TableI/OTypeCharacteristicSignalChannelDigital inputGC-1008Digital input (PNP)24V DC8-channelGC-1018Digital input (NPN)24V DC8-channelGC-1502Counter(200kHz max)–2-

[Related Keywords : smart plc, programmable plc, plc idec, plc controller]

AB Analog RTD Module 1756-IR6I

• Place of origin:  

  China

input ranges, notch filter, and real-time sampling. The floating mode includes all these features with the addition of temperature linearization, process alarms, rate alarms, and digital filtering. It also has selectable temperature unit to such as Celsius or Fahrenheit. There are Four (4) possible input ranges for the module including 1 to 487 m?, 2 to 1000 m?; 4 to 2000 m?;, and 8 to 4000 m?;.

[Related Keywords : ac servo motor]

AB Analog IO Module 1746-NI8

• Place of origin:  

  China

input with an isolated backplane. Its backplane current consumption is 200mA and 100mA at 5 Volts DC and 24 Volts DC respectively. It has a maximum backplane power consumption of 1 Watt at 5 Volts DC and 2.4 Watts at 24 Volts DC. The 1746-NI8 can be installed in any I/O slot, except Slot 0 of the SLC 500 I/O chassis. Input signal data is converted to digital data via successive approximation conv

[Related Keywords : 1746 ni8 scaling]

160KW High Frequency Induction Heating Machine Full Digital Induction Heating Equipment

• Place of origin:  

  China

DSP-160KW Full Digital Induction Heating Machine for all Metal Heating, Annealing, Hot forging, Hardening, Quenching, Melting Data sheet: ModelDSP-160KW (Three phase)work power380V/415V/440V/480V*3phase 50HZ-60HZinput current240AFluctuating output power160KWfluctuating frequency20-50KHZthe flow rate of cooling water0.15-0.3Mpawater temperature protection point40Cproduct sizemain :740x600x1550 mm

[Related Keywords : Industrial Induction Heat]

Multifunctional Dent Pulling Machine FY-4500

• Min. Order:  

  1 Box

• Price:  

  US$ 287

• Place of origin:  

  China

• Price Condition:  

  FOB ZhuhaiHongwan

Digital display. - Large pulling hammer and waveform wire welding. - Several optional welding currents. Technical parameters Input Voltage 220V or 380V 50/60Hz Input Power 16KVA Input Current 42A Max Current 4000A Output Voltage 1-13V Operation Way Continuous Welding Time 0-99s Regulation A B C Packing Size 63x52x92cm G.W. 66kg Accessories F002 Pulling Hammer with Hook x 1 set F017 Φ12mm Washer

[Related Keywords : Welder, Automobile, Dent pulling machine, Welding]

Controller

• Place of origin:  

  Korea

digital timer displayed on LED in manual mode makes it easy to set time. Memory the values for dispensing until you set the values again. Standard KIT Applied Materials Cream Solder, Silver Paste, Epoxy, Bond, UV Resin, Silicone, Chip Bond, Oil... Specification Input Pressure 0~10㎏/㎠, 0~2㎏/㎠ Time Range 00.01~99.99sec Interval Timer 0.01~3.99sec, 0.01~05.99min Vacuum Pressure 0

[Related Keywords : air pressure, Controller, dispensing system, precision dispensing controller]

Ultrasonic Plastic Welding Machine

input voltage change of 180 ~ 260 Volt. (In general model, there is amplitude fluctuation of ± 10%, in case of input power change of ± 2%) 2 steps constant amplitude function Keeping constant amplitude with 2 steps amplification function of generator applied FET or IGBT and AVR device regardless loading condition. The most advanced digital generato The digital type generator is able

[Related Keywords : welder, engineering, machine]

Ultrasonic Plastic Welding Machine

input voltage change of 180 ~ 260 Volt. (In general model, there is amplitude fluctuation of ± 10%, in case of input power change of ± 2%) 2 steps constant amplitude function Keeping constant amplitude with 2 steps amplification function of generator applied FET or IGBT and AVR device regardless loading condition. The most advanced digital generato The digital type generator is able

[Related Keywords : welder, engineering, machine]

4PCS FLYBACKS 200/300W HV CO2 Laser Power Supply Units 300W CO2 Power Source

• Min. Order:  

  50 Set

• Price:  

  US$ 356 ~ 376

• Place of origin:  

  China

• Supply Ability:  

  4000PCS each month

digital display module by network cable,which can show HV carbon dioxid power supply’ s working current,working statues and failure code. It is very good function for both machine factory and machine users 3 .This BR-60W CO2 power supply uses ordinary H/L/P/G/IN/5V terminal block to input laser control signal and black steel case. 4 .This LCD screen CO2 power supply has high efficiency and quic

[Related Keywords : 200W CO2 power source, 300watt HV CO2 PSU, hv co2 laser psu, CO2 POWER SUPPLY]

Automatic CNC Thread Rolling Machine

• Place of origin:  

  China

Dongguan Neres Hardware Machinery co., LTD. Is a Thread Rolling Manufacturer in China, Automatic CNC Thread Rolling Machine is my factory use of advanced digital control technology independent research and development of high-performance roll forming machine. It is mainly used for cold forming of small modulus involute spline and high precision external thread. It can also be used for cold rollin

[Related Keywords : Automatic thread rolling]