Electronic Control System Wholesale

High Low Temperature/ Low Air Pressure Test Chamber

• Place of origin:  

  China

High low temperature low air pressure test chamber is mainly used in aviation, aerospace, information, electronics and other industrial sectors to determine environmental adaptability and reliability of electrical and electronic products (including components, materials and instruments) under the action of high, low temperature and low air pressure alone or at the same time, and can carry out the

[Related Keywords : pressure chamber]

300w DC To AC Inverter

• Place of origin:  

  China

electronics like curling iron, laptop, hair straighter, drone, cordless power tool chargers and other appliances that require up to 300W. Our 300W DC to AC inverter can provide less electric noise, less damage to your device work with and better compatibility than modified sine wave inverter. For safety, please purchases are based on continuous power output and make sure the total wattage of all

[Related Keywords : inverter company]

C Type Punch Press Machine

• Place of origin:  

  China

system Hydraulic over-load protector Pneumatic die cushion device Handle Slide adjust device(APA below 60) Foot switch Electric Slide adjust device(APA 60 above) Quick die change device(die lifter, clamp and die arm) Mechanical Die height indicator( APA below 60) Slide knock-out device Electric Die height indicator(APA 60 below) Die room light Balance device Photo-electronic safety device Crank a

[Related Keywords : Press Machine]

Bigger Size DC Motor for Solar Tracker

• Place of origin:  

  China

system, the construction of the sensor circuit, programming of the control system and also its performance analysis. This automatic solar tracking system is designed with an electronic circuit control using PIC that can trigger the dc motors when the LDR sensors detect sunlight. DC motor will move vertical and 360 ̊horizontal to increase efficiency of sunlight to the solar panel. Solar panel for

[Related Keywords : Solar tracker motor]

Dustproof Testing Machine | Dust Proof Chamber

• Min. Order:  

  1 Set

• Price:  

  US$ 8950

• Place of origin:  

  China

SC-015 Dust-proof Test Chamber (Sand Dust Chamber) is applied to physical and other related performance tests for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated dust climate conditions. After the measurement, it is judged whether the performance of the product meets the requirements

[Related Keywords : Dustproof Testing Machine]

Custom CNC Machining Aluminum Refitting Vehicle Modified Vehicle

• Min. Order:  

  100 Piece

• Price:  

  US$ 1

• Place of origin:  

  China

• Supply Ability:  

  5000pcs/days

Electronic, Amplifier, Machinery, Furniture and so on More information: http://www.articleconstruction.icu http://www.articlebloger.com http://www.worldnewsblogs.com http://www.zixumachinery.com http://www.ruikangsports.com http://www.chemchamp.in http://www.electrophysics.in http://www.worldequipment.top http://www.saboliintegrated.com http://www.dykomintegrated.com http://www.laptop-trade-b2b.c

[Related Keywords : CNC machining service]

Laboratory and Industrial Vacuum Oven

• Min. Order:  

  1 Set

• Price:  

  US$ 100

• Place of origin:  

  China

electronics, medicine and other industries. Laboratory vacuum ovens consists of body, inside oven, vacuum system and heating system. Material of structure: The inner box material is made from a stainless steel plate with high-temperature resistance and anti-corrosion, which is made by argon-arc welding and sealing. Then make strong bone reinforcement, anti-bending and anti-deformation. The extern

[Related Keywords : Laboratory industrial]

Vibrating Feeder

• Min. Order:  

  1 Set

• Price:  

  US$ 1500

• Place of origin:  

  Korea

ABMF Series Vibrating Feeder of Electronic Resonance type (Greater capacity for increased productivity) ■Feature It stays in a durable and good working condition even after a long term use. It can be enclosed to ensure better sanitary and prevent entry of foreign material. Easy to control feeding capacity and layout design due to standardization of machinery. It is possible to apply the comple

[Related Keywords : Vibration, feeder, vibrating feeder, vibrating conveyor]

MIM Metal Parts

• Place of origin:  

  China

system, electric discharge machining method and CNC machine tool and other new equipment, the precision can be controlled within the class JIS 0 – JIS 5 / DIN 3 – DIN 9. In addition, we also have precision electronic height gauge 0 ~ 610mm (measurable range) 2+L / 600μ (error), Japan TOKYO TECHNICAL gear measuring machine, electron microscope, Vickers hardness tester, Germany ZEISS three-dim

[Related Keywords : Metal Componments]

Concrete Curing Autoclaves

• Place of origin:  

  Korea

Pressure ~40kg/cm2 ~40kg/cm2 ~40kg/cm2 ~40kg/cm2 ~40kg/cm2 Temp. & Pressure Deviation ±1.5(%) ±1.5(%) ±1.5(%) ±1.5(%) ±1.5(%) Electronic Control PID Control PID Control PID Control PID Control PID Control Dimension (W x D x H) 800mm x 550mm x 1,300mm 1,000mm x 800mm x 1,300mm 1,500mm x 900mm x 1,800mm 2,500mm x 1,830mm x 2,700mm 3,500mm x 2,200mm x 3,300

[Related Keywords : Concrete Curing Autoclaves]

2. Paper Envelope Converters

1) Mechanical Die Cutter FEATURES : Dual pressure operation and stepless pressure control. One Piece Cast Iron Frame. convinient knife changing system, No Carbon Electronic clutch and high accurate Worm Gear Box. Hard-chrome plated table, table slot covering, optical Cut-line indicator. Digital display available and possible to choose one of three units; Metric, Inch & Shaku. Two hand cut releas

[Related Keywords : Mechanical Die Cutter]

Ultrasonic Plastic Welding Machine

Electronic amplitude adjustment function (10~ 100%) Providing an easy adjustment for amplitude by a switch without changing the main horn and a optimum welding condition according to welding material and product condition. Precise overload protection device Protecting completely the damage on generator and main horn through checking current, voltage, phase and frequency. Low pressure - high power

[Related Keywords : welder, engineering, machine]

SPD for Windpower System

• Place of origin:  

  China

• Supply Ability:  

  2000

Wind protection devices are mainly used to protect wind power system equipment, sensitive electric and electronic parts in turbine system from lightning strikes, widely applied in power line protection in wind power system's distribution box, and other AC distribution box. Feature of Wind Protection Devices 1. Own designed temperature control circuit-breaking technology and built-in overcurrent p

[Related Keywords : wind protection devices]

Intelligent Device

• Min. Order:  

  1 Piece

• Price:  

  US$ 100

• Place of origin:  

  China

• Supply Ability:  

  500pcs

System It is used for intelligent monitoring of reefer container yard, Remotely inspect and automatically inspect the temperature of the reefer container and make a fault warning in time, Improve monitoring efficiency and management quality Electronic Seal Electronic Seal is a Chinese shipping container -sealing product using the world's unique serial number electronic chip to record the containe

[Related Keywords : intelligent container]

Closed Loop Spray Dryer Machine Inert Gas Atomization Dryer for Nitrogen Processing

• Place of origin:  

  China

system used to re-cycle. Explosion-proof closed cycle centrifugal spray drying system is working in a confined environment, drying medium is inert gas (like nitrogen), positive pressure operation in the drying tower. If the internal pressure decreased, the pressure transmitter can control the nitrogen amout entered into the drying tower automatically, to ensure system pressure balance.medium like

[Related Keywords : Spray Dryer Machine]

Cast Film M.F.G Line

• Place of origin:  

  Korea

Control system for process optimization and minimal scrap. In case of Non-standard film like special application, it’s necessary to meet and consult with us. Applicable Uses Warp, Stretch Film Masking, Laminating film Diaper and Breakable film Vacuum package for food and meat Package materials for Electrical and Electronic parts Application to industry and special purpose Standard Spec

[Related Keywords : Cast Film M.F.G, casing film manufacturing]

WDW Loop Stiffness Testing Machine

• Place of origin:  

  China

Electronic Universal Testing Machine, JJG-1996 Verification Regulation of Electronic Universal Testing Machine and GB/T9647-2003 Thermoplastic tubes loop stiffness determination; applicable to test loop stiffness for various tubes, also can perform compression test for other materials. This series machine are equipped with precise auto control and data acquisition system and realize full digitali

[Related Keywords : testing machine, loop, stiffness, WDW]

Induction Preheating

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

system ( so that it will not need a water source), a flexible heating cable for different sizes/shapes workpieces, and exact control of the preheat temperature for welding and the heating time. Hence, the induction heating equipment produced by JKZ Electronic is a very suitable heating power source in the pre-weld heat treatment process, especially for oil/gas pipes welding, chemical tank repair

[Related Keywords : induction heating power s]

Cigarettes Making Machine

• Place of origin:  

  Poland

necessary certificates. TECHNICAL INFORMATION: • capacity 10-12 pcs./min, • power supply 230 V, • big tobacco feeder, • semi-automatic cleaning system, • electronic control panel, • 10-step regulation of compaction, • weight 6 kg, • size 31x18x22 cm. In kit with machine You receive: • ac adapter, • keys, • instruction, • certificate, • bill or invoice, • guarantee.

[Related Keywords : ]

AB Backup Scanner Module 1747-BSN

• Place of origin:  

  China

controls all the remote I/O operations. The secondary module is available to take over the control if something goes wrong on the primary module. The backup scanner has the ability to switch between 2 communication channels. The first channel can be configured as RIO or DH +. The second channel is used to replace the RS-232/485 channels to provide connections for the operator's electronic interfa

[Related Keywords : servo drive]