Light Guides Wholesale

Rubber Mount

• Place of origin:  

  Korea

- A VM-1000 mount is light, small and easy to install, so it can be used in high displacements. Plus, it has a wide application because it is designed to ensure structural stability. With a fixing nut inside the center of the neoprene rubber mount and steel plate on the top and bottom, it can be securely anchored to the ground. - VM-2000 mount is a vibration isolator to easily control multi-axial

[Related Keywords : vibration control]

Goanwin T2n Straight-side Double Crank Press Forcar Bumper, Car Fender, Rear Crossbeam Bracket

• Min. Order:  

  1 Piece

• Price:  

  US$ 999999

• Place of origin:  

  China

Guiding: Four-corner, eight-sided long rectangular guides - Overload Protection: Hydraulic overload protection device - Die Height Adjustment: Powered adjustment with electronic readout - Lubrication System: Thin oil forced lubrication with fault alarm - Control System: PLC-based control with 10-inch color touchscreen - Operational Modes: Emergency stop, inching, continuous operation - Frame Defl

[Related Keywords : Power Press, Stamping Press, Gantry Press, Mechanical Press]

Ultrasonic Web Guide System (Guiador De Banda Ultrasonico)

• Place of origin:  

  Taiwan

Ultrasonic Web Guiding System (EPC) 1. Germany Ultrasonic web guiding sensor, resolution 0.025mm, accuracy 0.1mm, protect class IP65. 2. Suitable for clear film, opaque film, light-sensitive materials, paper, foil…etc, and high dust environments. 3. Brushless Electrical Actuator, thrust 250kgf, load 2.5 tons(COF=0.1), max line speed 250m/min. 4. Automatic trace speed adjustment (analogue) accor

[Related Keywords : Ultrasonic Sensor, EPC, web guiding system, guiding device]

30-160KW 10-30Khz Induction Heating Machine

• Place of origin:  

  China

Ultrasonic induction heating equipment IGBT inverter used, high efficiency and low energy consumption Can work continuously with 100% duty cycle and set up 100% at any load Can replace convention heating method such as heating by flame coal salt bath gas and oil Work frequency 10-30Khz, power 30-250KW Digital display and compact design, light weight, easy for installation and operation Soft switc

[Related Keywords : Induction Heating Machine]

Pneumatic Actuated Flanged Floating Cutting-off Ball Valve

• Place of origin:  

  China

Pneumatic Flanged Floating Ball Valve ( GZSHO) O type pneumatic cut-off ball valve is often assemble with pneumatic double acting actuators. It has the advantages of simple structure, small volume, light weight, convenient operation, and can be widely used in petroleum, chemical, power, textile and other industrial production process automatic control and remote control.The structure principle:O

[Related Keywords : Ball Valve]

Single-Column Hydraulic Press

• Min. Order:  

  1 Unit

• Price:  

  US$ 88000

• Place of origin:  

  China

used for press-fitting of shafts and sleeve parts, as well as stretching, bending, embossing, forming, blanking and other processes of simple version parts, as well as general powder, Pressing of plastic products.Optional accessories: displacement sensor device, light curtain safety protection device, oil heating and cooling device, floating guide rail and rolling bracket for mold change, PLC.

[Related Keywords : Hydraulic Press]

SMD Chip Inductor Hardware Base Stamping Parts Precision High Speed Punch

• Min. Order:  

  1 Set

• Price:  

  US$ 70000~80000

• Place of origin:  

  China

• Supply Ability:  

  10 Set/ Sets per Month

lights 45 ton C-type transformer EI sheet high-speed stamping machine optional accessories: 1. Roller feeder (width option: 105/138mm) 2. Clamp feeder (single/double) 3. Gear feeder (width option: 150/200/300/400) 4. Electronic disc (weighing 500kg) 5. Single sided two handed material receiving machine 6. Single point dead center monitor 7. Double point dead center monitor 8. Electric mold adjust

[Related Keywords : high speed punch, precision punch, SMD chip inductor, hardware base stamping]

Hot Runner Heating Oil Mold Temperature Controller for Injection Mold

• Min. Order:  

  1 Unit

• Price:  

  US$ 500

• Place of origin:  

  China

• Supply Ability:  

  3000sets per month

steel, corrosion resistance and long life. 06 SUS304 stainless steel seamless SUS304 stainless steel seamless heating barrel and main pipelines can ensure corrosion-resistant, no leakage and long working lifetime. Customer Case Widely used for plastic molding, Die casting of light guide plate, rubber tire,roller, chemical reaction kettle, adhesive industry, plastication and mixing industry etc.

[Related Keywords : oily temperature control, temperature controller]

Aluminum Precision Machining Services

• Place of origin:  

  China

light-guiding elements Consumer Electronics: aluminum enclosures, small mechanical parts, hinges, knobs, and connectors Industrial Equipment: gears, screws, fittings, couplings, valves, and manifolds Surface Treatments of Swiss Machined Aluminum Parts Surface treatments play a crucial role in enhancing the performance, aesthetics, and durability of Swiss machined aluminum parts. They provide vari

[Related Keywords : custom aluminum cnc]

DRC-D51 Ring Rolling Machine

• Place of origin:  

  China

light weight, good rigidity, sensitive manipulation, etc., by the majority of small and medium-sized enterprises, the green obscurantism. D51 type ring rolling machine has a novel and reasonable structure, absorbing the experience of users, adopting the advantages of some imported equipments, and selecting new supporting parts: the guiding surface of the slider is five to six times longer than th

[Related Keywords : Ring, Ring Rolling Machine, Beraing Ring, Gear Blank]

10 Zones SMT Reflow Soldering Machine , PCB SMD Reflow Oven Hot Air Convection

• Place of origin:  

  China

PRODUCT DESCRIPTION10 Zones Pcb Smd Reflow Oven Hot Air Convection SMT Reflow Soldering Machine Features: HR Series High End/Nitrogen Reflow Soldering Machine 1.Humanized operation interface, Windows 7 operating platform, Chinese and English switching.2.Intelligent monitoring operation status, fault sound and light alarm, production data recording.3.Siemens PLC + PID closed-loop control, temperat

[Related Keywords : SMT Reflow Soldering Mach]

ZG-MF Series 15-300kw 1-20KHZ Medium Frequency Induction Heating Machine (Water Cooling)

• Place of origin:  

  China

guides, hardware tools, pneumatic tools, power tools, hydraulic parts, ductile iron, automobile and motorcycle parts, internal parts, etc. 3. Medium Frequency Induction Annealing Equipment can do diathermy heating before forging, forming, bending etc for standard parts, fasteners, large workpieces, small hardware, straight shank twist drills, overall and partial heat penetration and hot upsetting

[Related Keywords : Induction Heater]

2400Tons Metal Forming Hydraulic Press for New Energy Vehicle Battery Case

• Place of origin:  

  China

guide rails of full stroke length not only ensure high accuracy but also allow easy adjustment of slide leveling. The Hydraulic Metal forming press fully meets CE safety requirements. Two side locking cylinders lock the slide when it reaches top position. And two sets of light curtain sensors are fitted in the front and rear that will stop the machine when human body carelessly enters the working

[Related Keywords : Hydraulic Press]

Sapphire Rectangular Window with Hole

• Place of origin:  

  China

High-quality sapphire material has a series of characteristics such as high strength, high hardness, high temperature resistance, abrasion resistance,corrosion resistance, good light transmission performance (in the 170nm ~ 6000 nm), excellent electrical insulation performance, and good mechanical properties.' The chemical performance is very stable, free from acid and alkali corrosion. The hardn

[Related Keywords : Sapphire Rectangular Wind, Sapphire Light Guide, Sapphire Rectangular Win, Sapphire Wedged Window]

3D Printing Services

• Place of origin:  

  China

3D Printing Services Additive manufacturing for functional prototypes & production parts. Competitive FDM, SLA, SLS servicesWide range of material and finishing optionsTechnical support, design guide and case studiesThe popularization and application of 3D printing technology has greatly reduced the manufacturing threshold of standardized large-scale production since the industrial revolution. Si

[Related Keywords : 3D Printing Services, 3D Printing, Printing Services, 3D]

Carbide BTA Deep Hole Drilling Inserts TPMX1403/1704/2405/2807 Indexable Cutting Tools

• Min. Order:  

  10 Piece

• Price:  

  US$ 2~2.5

• Place of origin:  

  China

guide pads and other cutting tools in stock,hight precision, accurate size, replaceable with famous brand.Full choice of deep hole drills, replacement of Iscar or Sandvik, with Balzers coating CVD coated cemented carbide GradeDescriptionEquivalent to ISO YC1015MT-CVD coated, the substrate with excellent wear resistance in combination with MT-TiCN,fine grained AL2O3TiN multi-layer coating, which i

[Related Keywords : indexable insert, drill inserts, Iscar inserts, carbide inserts]

Trustor DIsc Brake

light. Sintered Pad The sintered pad is provided for high speed and temperature. It is comparatively not abrased, stable braking and long life (two times than resin mold lining guaranteed). Thrustor for High Frequency and Against Oil Leakage is Adopted For the evaluation of brake reliability, high quality thrustor manufactured by ourselves, is applied thereto and can be operated for 600 times per

[Related Keywords : TH Elema Eng, AC Magnetic Brake, Oil Thrustor Brake, Clipper Brake]

AB Glue Dispensing Machine TBS-TC-6331

• Place of origin:  

  China

light in weight and driven by single linear guide rail. 4.Glue dispensing program can be downloaded and copied on U disk and teaching box. The volume, thickness, speed, glue dispensing time and parameters can be set at will. 5.A variety of dispensing tips, syringes, dispensing valves and controllers to meet different needs. AB Glue Dispensing Machine Features: Dual rails work alternately with non

[Related Keywords : Glue Dispensing Machine]

Machine Vision Telecentric Illuminator

• Min. Order:  

  8000 Piece

• Price:  

  US$ 50

• Place of origin:  

  China

• Supply Ability:  

  8000pcs/month

light rays collimating and parallel to the optical axis also applies. Canrill telecentric illuminator machine uses optical devices to direct light from fiber-optic guides or LEDs to the object being examined, producing high-contrast silhouettes. TV central luminescence improves edge contrast and measurement accuracy by reducing diffuse reflection from objects. The collimating light leaves the ill

[Related Keywords : machine vision illuminato]

5Axis CNC Machining Parts

• Min. Order:  

  1 Set

• Price:  

  US$ 100

• Place of origin:  

  China

light guide Tube We customize light guide plates. Xin Pin is an cnc machining parts company in automotive light rapid prototyping service in China We use the 5-axis CNC machining center to achieve high-efficiency production and faster delivery. FAQs of 5Axis CNC Machining Parts 1 When should you choose a 5-axis machining process?  5-Axis CNC machining is very popular in the oil and gas, autom

[Related Keywords : 5Axis CNC Machining Parts]