Silicon Resins Wholesale

No-Dig FRP Sware Rehabilotation System

silicon rubber heater housed in the rubber sleeve packer to cure the epoxy- acryl resin . Check the repair condition by CCTV camera with robotic crawler and record it by VTR at the site located controller system in the vehicle on the ground. *Necessary Equipment 1. Agent Epoxy-acryl resin (Vinyl-Ester Resin) : SY-628, SY-629T, SY-630WT Hardener (328E), Booster (D), Hardening controller (R), Coba

[Related Keywords : No-Dig FRP Sware, Rehabilitation System]

Sand Paper

silicon carbide, semi-open coated, resin over glue binder, B paper backing Application: Excellent for sanding and dry-finishing of shaped pieces either unfinished or treated with nitro, polyurethane, acrylic and synthetic paints 1．4 Wet and Dry waterproof paper Materials: B kraft paper backing, aluminium oxide & sillicon carbide abrasive, semi-open coating . Double resin binder Applicati

[Related Keywords : Abrasive paper]

Resin Casting Busway Continuous Casting Machine

• Place of origin:  

  China

silicone rubber end baffles on both ends of the conductor according to the phase to ensure that the length of the conductor end exposed to the baffle is 80±1mm. At the bottom of the mold cavity, place synthetic resin casting cuts with reasonable width and thickness at an interval of 500-1000 mm, and place the entire conductor with the baffle in the assembled mold cavity to ensure that the outer

[Related Keywords : Bus duct casting machine, resin casting machine]

Fully Automatic Solar Laminator

• Min. Order:  

  1 Unit

• Price:  

  US$ 200000

• Place of origin:  

  China

• Supply Ability:  

  Monthly production capacity of more than 40 units

silicon solar cells have a photoelectric conversion efficiency of about 17%, the highest up to 24%, which is the highest in all kinds of solar cells, but the production cost is so high that it is not widely used in large numbers. Most solar panel equipment suppliers offer a 25-year warranty on mono-crystalline silicon because it is typically packaged in toughened glass and waterproof resin. How A

[Related Keywords : vacuum laminator]

Controller

• Place of origin:  

  Korea

Materials Cream Solder, Silver Paste, Epoxy, Bond, UV Resin, Silicone, Chip Bond, Oil... Specification Input Pressure 0~10㎏/㎠, 0~2㎏/㎠ Time Range 00.01~99.99sec Interval Timer 0.01~3.99sec, 0.01~05.99min Vacuum Pressure 0~-350mmHg, 0~-680mmHg Out Signal Open connector, DC24V, 20mmsec(Relay) Power Source AC220V 50/60Hz, AC100V 50/60Hz Power Consumption 32W Weight 4.9㎏

[Related Keywords : air pressure, Controller, dispensing system, precision dispensing controller]

YINYAN Ex-proof Type Double Planetary Mixer Machine

• Place of origin:  

  China

• Supply Ability:  

  20 sets per month

paste, solder paste, ceramic paste, silicone inks, sealants, structural adhesives, soft cream, jam etc. Application Industry: Suitable for dispersing and mixing materials in industries such as coating, putty, ink, adhesive, energy, electronics & electrical appliances, pharmaceuticals, cosmetics, food etc. More detailed information, could visit our official website and download our catalogue.

[Related Keywords : planetary mixer machine, resin adhesive mixing machine, silicone sealant mixing machine, planetary mixing machine]

Semiconductor Plastic Encapsulation System / Fully Automatic Plastic Sealing System

• Place of origin:  

  China

• Supply Ability:  

  negotiation

silicone resin on the chase 7. Environmentally friendly equipment that generates no waste The company's main business scope:1. Technology development, assembly and sales of semiconductor automation equipment; existing new development equipment: MINILED glue injection film press integrated machine, photoelectric automatic eutectic machine eutectic furnace, etc.2. Provide new/second-hand KS series,

[Related Keywords : Plastic sealing system, Molding Equipment, LED Molding Equipment]