Source Switch Wholesale

SCM3000 M2M Chip Personalization Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 900000 ~ 1500000

• Place of origin:  

  China

Source 220V(-5%~+10%), 50Hz, 6KW Noise ＜65dB Operating Temperature 23℃±3℃ Working Humidity 50±10% Compressed Air stress: 0.5Mpa Flow rate: 300LPM Communication Interface Ethernet Fuctions of SCM3000 M2M Chip Personalising Machine PARAMETER Input Module 1. Tray Input: up to 20pcs of trays can be loaded. 2. Tape Input: tape in 12mm is supported, 8mm, 16mm and 24mm is extensible; Compatible

[Related Keywords : personalization machine]

High Pressure Pipe Crimping Machine

• Place of origin:  

  China

source of the hose compressor, and the compressor compression process is realized through the hydraulic transmission and control system. The improved design of the mechanical structure and control system of the existing hydraulic high-pressure hose compressor can greatly reduce the overall structure of the compressor, and strive to make the hydraulic transmission and control system as simple as p

[Related Keywords : Pipe Crimping Machine]

Resistance Seam Welding

• Min. Order:  

  1 Set

• Price:  

  US$ 200000 ~ 800000

• Place of origin:  

  China

switching the power source on and off at specific intervals during the process. IMPORTANT ISSUES OF RESISTANCE SEAM WELDING 1 The heat source is usually electrical which may be supplied by an arc generator, spot welding machine, or resistance welder. 2 High speed welding of coated steels is of particular importance in manufacture of tin cans. Specialist consumable wire seam welding machines are u

[Related Keywords : crimping machine]

Double Ridged Waveguide Tees

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

source is connected to H-Arm port. The collinear ports together with these ports make a bridge and the impedance measurement is done by balancing the bridge. 2. As a duplexer The duplexer is a circuit which works as both the transmitter and the receiver, using a single antenna for both the purposes. Port 1 and 2 are used as receiver and transmitter where they are isolated and hence will not inter

[Related Keywords : Double Ridged Waveguide]

C Type Punch Press Machine

• Place of origin:  

  China

switch Electric Slide adjust device(APA 60 above) Quick die change device(die lifter, clamp and die arm) Mechanical Die height indicator( APA below 60) Slide knock-out device Electric Die height indicator(APA 60 below) Die room light Balance device Photo-electronic safety device Crank angle indicator Feeder Electric stroke counter Uncoiler Air source receptacle Straightener Against over-run safet

[Related Keywords : Press Machine]

Practical Stencil Cleaning Machine Multipurpose Fully Pneumatic

• Place of origin:  

  China

source, which is a new type of high-performance pneumatic cleaning equipment. Put the stencil into the cleaning room manually, adjust the cleaning and drying time, press the start switch, the stencil will be automatically cleaned, rinsed and dried. When the set time is reached, it will stop running automatically. When the door is opened to take out the workpiece, the time timer will be reset to r

[Related Keywords : Stencil Cleaning Machine]

Coating Machine

• Place of origin:  

  China

Rexroth" in air source treatment filter and adopting British "NORGREN" in pressure regulating alarm. Adopting Japanese "Panasonic" PLC control in control circuit, provided with Japanese "Panasonic" frequency converter control, using color man-machine interface operation screen control, and other electrical components are all brand-name products from Japan, France and Italy. More information .

[Related Keywords : Coating Machine]

3 in 1 Laser Cutting Cleaning Welding Machine

• Min. Order:  

  3000 Set

• Price:  

  US$ 4000 ~ 60000

• Place of origin:  

  China

Remcor 3 in 1 laser welding machine and cleaning machine integrates three functions. One machine can get the multi-purpose, it's much more cost saving on machines, labors and spaces. Apply with a continuous laser source, which can have 3-5 times faster in welding speed and cleaning speed compared with pulse type. This fiber laser welding machine in china is widely used for precise welding and rus

[Related Keywords : 3 in laser welding]

2pcs Flybacks 100W CO2 HV Laser Power Supply 100watt HV CO2 PSU

• Min. Order:  

  50 Piece

• Price:  

  US$ 129 ~ 149

• Place of origin:  

  China

• Supply Ability:  

  4000PCS each month

ZR-100W CO2 POWER SOURCES Feature 1. The 100w laser power supply unit can match with EFR,SPT,Yongli, Weiju and other brands' 140-145cm sealed glass type CO2 laser lamp. The external LCD laser power supply unit selects zero-current half-bridge soft-switch circuit to make sure the air cooling laser power supply unit has high efficiency and fast response speed. 2.The air cooling laser power supply

[Related Keywords : 100watt HV CO2 PSU, 100W CO2 power supply, MYJG LASER PSU, ZYElaser co2 laser PSU]

Intelligent Var Compensator

Outline Rapid growth of non-linear Loads, such as large capacity welding machine, crane, variable speed motor device, draws a large reactive power from the source supply, results in of voltage distortion and flicker in the system, which has an adverse effect on electric and control unit of the system IVC (Intelingent Var Compensator) compensates the reactive power drawn by the load from power sys

[Related Keywords : Harmonic Filter, var compensator]

SF6 Recovery and Gas Refilling Device

• Place of origin:  

  China

• Price Condition:  

  FOB Shengzheng

• Supply Ability:  

  10 sets/month

source: 380v, 50Hz, 3Phases III. SF6 retrieving equipment specifications A. HC series of high voltage retrieving Application: electric switch, retrieving in small quantity Particularity: high voltage and liquefaction Model Liquid store volume Retrieving rate Vacuum pump speed HC-30 30kg 4 M3/h 14 M3/h HC-50 50kg 4 M3/h 14M3/h B. LC series of low pressure retrieving Application: GIS elect

[Related Keywords : sf6 gas reclamation, sf6 vacuum evacuating, sf6 gas refilling, sf6 recovery]

A+Z B+Z Series

• Min. Order:  

  1set

• Place of origin:  

  China

• Price Condition:  

  FOB Tianjin

• Supply Ability:  

  500sets/month

source ,Electrical machinery because of power failure but knock off ,Thus the protection main engine equipment is not damaged. The introduced new generation of intelligent model Assembled and manufactured in domestic, SD series introduce the advanced technology from France and the key components are imported from the country of origin. The manufacturing process is strictly in accord with the tech

[Related Keywords : Bernard Linear Actuator, high-speed electric linear actuator, dc electric linear actuator, high frequency linear actuator]

Core Drill Bit Laser Welding Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

• Supply Ability:  

  20sets per month

CONSUMPTION ≤8 KW AIR PRESSURE 0.4-0.6 MPa SAW BLADE DIAMETER 180-1200mm LASER SOURCE 2KW or 3KW fiber laser SEGMENT FEEDING Auto feeding + Belt transport. (vibration bowls as option) TOOTH POSITION Auto by reflective light switch+Servo motor WELDING ACCURACY ≤0.05mm (mechanical accuracy) OVERALL DIMENSION LxWxH 2000MM*1850MM*1800MM WEIGHT Approx. 1200kgs PRODUCTIVITY 4s ~ 6s per segment

[Related Keywords : drill bit welding machine, drill bit laser welding, core drill laser welding, core drill welding machin]

Water Welding Machine-305T with 300 Liter/Hour Newly

• Place of origin:  

  China

• Supply Ability:  

  3000 sets per month

source of flame replacing LPG, propane,acetylene fuel,natural gas or other fuel. 2.environmental-friendly and safe: output of hydrogen oxygen flame burning is only water vapor with on smell or no pollution. 3.five safety elements: automatic air switch, non-return valve, auto-pressure release valve,flashback arrestor, flame torch with anti-flashback device. 4.gas production can be adjustable. (

[Related Keywords : water welding machine, micro flame welder, hydrogen flame generator]

Refrigerated Heating Circulator LNEYA

• Min. Order:  

  1 pcs

• Price:  

  USD 1000

• Place of origin:  

  China

• Price Condition:  

  FOB shanghai

• Supply Ability:  

  200 pcs per month

(air-cooled) 160kg 185kg 245kg 285kg 320kg 360kg Power AC 220V 50HZ 4.5kW (max) AC 380V 50HZ 6.5kW (max) AC 380V 50HZ 9kW (max) AC 380V 50HZ 12.5kW (max) AC 380V 50HZ 16.5kW (max) AC 380V 50HZ 24kW (max) Case material Cold rolled steel Optional SUS304 case material Optional power 220V 60HZ three-phase source, 440V～480V 60HZ three-phase source

[Related Keywords : heating bath, cooling bath, heating/refrigerated circulator, thermostat/bath]