Spring Machine Wholesale

Hydrogen-rich Water Machine DT6000A

• Place of origin:  

  China

Hydrogen-rich Water Machine DT6000A Water Hydrogen Machines are dedicated to finding the taste of mountain springs in memory and making tap water drinkable.It can reach 93% hydrogen absorption rate [hydrogen escape from water <7%], temperature 25 degrees, 1 standard atmosphere, 40PSI tap water pressure, 10 cm water level, open the water cup, and static test.

[Related Keywords : DT6000A]

Hydrogen-rich Water Machine DT6000A

• Place of origin:  

  China

Hydrogen-rich Water Machine DT6000A Brand: Airwaterawg Flow rate: 1.5L/min (pressure about 40Psi) Filter life span: 3500L-10000L or 1 year Applicable temperature: 4-40°C Operating water pressure: 10-60 psi Size: 297 * 215 * 357 mm Weight: 8.5 kg Water Hydrogen Machines are dedicated to finding the taste of mountain springs in memory and making tap water drinkable.It can reach 93% hydroge

[Related Keywords : Water Machine]

VH61 Spring Hanger (Deflection : 25mm)

• Place of origin:  

  Korea

from moving around by the distortion of the spring, and because the spring is coupled with V-bolt, the spring does not fall apart when moving the mount. (Option) The hanger rod can be installed using the hole on the top/ bottom plates to suspend the equipment. ■Usage For high-efficient vibration control of axial, in-line fan, machine rooms, pipes in air-conditioning rooms and ducts

[Related Keywords : building materials, anti-noise, vibration-control, shock-control]

VH20 Spring Hanger (Deflection : 25mm)

• Place of origin:  

  Korea

CR type spring sheet is attached on the bottom to block high frequency resulting from the vibration that the spring itself generates. ■Usage ◆ For high-efficient vibration control of axial, in-line fan, machine rooms, pipes in air-conditioning rooms and ducts ◆ For high-efficient vibration control of suspended ceiling desk system in, for example, studios and acoustical laboratories

[Related Keywords : building materials, noise-control, vibration-control, anti-noise]

Charging Clip Assembly Machine/Charger Clamp Assembly Machine

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

spring feeding unit, automatic sorting; 3. In the four sets of full material preparation unit, and optical transmission signal, then automatic assembling operation; 4. The machine has automatic assembly counting function output reaches the set value automatically shut down after the standby; 5. If feeding is not timely, to be filled automatically, then the machine automatic functioning; 6.Device

[Related Keywords : Charging clip assembly machine, clamp assembly machine, charger clamp assembly machine, clip assembly machine]

Cloth Peg Assembly Machine/Cloth Clip PIN Assembly Machine

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  5 sets/month

Cloth peg assembly machine 1. Features: 1. Automated delivery system, two sets of clip feeding system, one set spring feeding system 2. The machine with photo sensor and automatic assembly when the material is full. 3. This machine has automatic assembly counting function when , to automatically shut down when reach to set quantity 4. If the feed is not expected in time, after full material the m

[Related Keywords : cloth peg assembly machine, clothes peg assembly machine, cloth pin assembly machine]

WJ-BBB303

machine has been equipped with a pressure controller and an up/down limit adjustment bolt. Cutting The scale(ruler) is used for a small quantity and the Stop Bar Jig is used for a large quantity. Being equipped with spring guide press devices which can prevent the material from shaking for material cutting, the machine can produce a clean cutting, surface accurately in accordance with a give

[Related Keywords : Busbar Multi Working Machine]

Bandsaw Blades

• Min. Order:  

  5 pcs

• Place of origin:  

  Taiwan

• Supply Ability:  

  15,000pcs/ per month

delivery and services embody our care for customers. Efficiency: the state of the art thermal treatment and anti-rust oil applied to the teeth bringing more endurable sharpness and cleaner cutting with less work interruption. Technology: no tooth pitch error possible by modern production technology. Joints welded by electronically controlled machines for utmost blade strength and tension.

[Related Keywords : blade, saw blade, meat saw blade, food blade]

ZG-SF Series 16KW To 320KW /6-50KHZ Super-Audio High Frequency Solid State Induction Heating Quenchi

• Place of origin:  

  China

machine. Main Components: Solid State Induction Heating Controller + Transformer + coil Super-Audio High Frequency Solid State Induction Heating Quenching Machine APPLICATION 1. High frequency heating for hot upsetting of various high-strength bolts and nuts; 2. High frequency quenching of various gears, sprockets and shafts; 3. High frequency quenching of various axle shafts, leaf springs, shift

[Related Keywords : Induction Heater]

ZG-UHF Series 3.2KW To 12KW /200-1100KHz Ultra-High Frequency Induction Heating Brazing Machine (Wat

• Place of origin:  

  China

for very fine electronic components. 6. High Frequency silver brazing for small fine metal joints. 7. High Frequency brazing and annealing of wire or strip. 8. High frequency induction heating welding for various tools. 9. Induction hardening for cutter and knife edges. 10. High frequency induction heating tempering for any metal springs or sheets or strips. https://www.inductionmachinery.com/

[Related Keywords : Induction Heater]

Manual Foam Cutting Table

• Place of origin:  

  China

spring, fish mouth clip), etc. Product performance and characteristics 1. This equipment is an indispensable cutting equipment for the white mold workshop in the field of lost foam. It has the characteristics of flexible application, simple operation and low labor requirements. 2. The cutting machine with auxiliary tooling can complete the cutting of various shapes, such as cuboid, cylinder, cone

[Related Keywords : Manual foam cutting table]

Particle Analyzing Instrument(Testing Sieve,Vibro Sieve)

spring foot reduces the influence of vibration on the machine and noise level; 6. Transparent top cover for you to view the separation process; 7. Wet separation head with three nozzles ,and wet separation base plate with water outlet are available for wet grain size analysis; 8. Separation-assistance balls are available for sticky material filtering analysis. The motion of the balls avoids me

[Related Keywords : Testing Sieve, Particle Analyzing Instrument]

Die Steel /Mould Steel

• Min. Order:  

  1 Piece

• Price:  

  US$ 1

• Place of origin:  

  China

• Supply Ability:  

  100000ton/Year

spring steel, bearing steel, stainless steel, heat resistant steel, high temperature alloy series, military products and the formed forgings of other special trademarks etc. such as the alloy constructional steel with all kinds of trademarks such as 42CrMo, 17NiCrMo6, 34CrNi3Mo, 34CrNiMo6, 40CrNiMoA etc., Cr stainless steel such as SUS410/420 etc.; Ni duplex stainless steel with ultra-low carbon

[Related Keywords : Hot Forged, Round Bar, Hot Rolled, H13 D2 D3]

Drawing Frame TMFD81L with Uster Autoleveller

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  2000 pcs/Year

machine for various fibers. Available for automatic filter cleaning and sliver cutter for full can. Spring loading is for sliver feeding measure, good dynamic response and high accuracy. Preset intranet interface is convenient for central management. Technical specifications: Range of Application Fiber length up to 76mm combed and carded cotton, chemical fiber and blends Delivery Two The highest

[Related Keywords : drawing frame, draw frame, textile machinery, Spinning]

Metal Stamping Parts

• Min. Order:  

  100

• Price:  

  USD 1

• Place of origin:  

  China

• Price Condition:  

  EXW

• Supply Ability:  

  www.chinacncmachining.net

An ISO 9001 manufacturer, producer in China specializing in the global supply of Good, high quality, low price, low cost OEM Metal parts, steel parts, precision metal parts, such as CNC Turning machining,CNC Milling machining, metal stamping parts, springs machining,mold Manufacturing,mould design, turned parts, cold forming parts, CNC precision parts, Casting parts, forging parts and other CNC m

[Related Keywords : metal stamping parts]