T Max Wholesale

Cone Type Bearing Heater

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB Shanghai

• Supply Ability:  

  500 sets per month

T Electric power 1000 W Voltage AC 220-240V/50HZ/60HZ Auto Adjustment 50% -100% Electric current 2.3-4.5A (Auto) Temperature Scope 0-180 Degree C Time Scope 0-99”59min Max Outside Diameter 260 mm Inner Diameter 20-120 mm Max Bearing Weight 15 Kg RESIDUAL MAGNATIC Less than 2A/c INDUCTION HEATED HEAD SIZE Dia177x200xφ19mm Dimension/Net Weight 400x210x300 mm/ 3 KG DEMANGNETIZATION AUTO COILS Coo

[Related Keywords : Bearing heater, tower type bearing heater, Bearing induction heater, Induction bearing heater]

Decanter Centrifuge for Sludge Dewatering

• Min. Order:  

  1 Set

• Price:  

  US$ 16800

• Place of origin:  

  China

• Supply Ability:  

  100sets

t allow for this fine tuning.4. Higher Throughput CapacityDepending on the size of the machine centrifuges can offer a higher throughput than other technologies.Limitations1. Noise and VibrationThe machine can be very noisy2. High-Energy ConsumptionThe device has a high-energy consumption due to large motors and pumps needed to run the unit.3. High equipment capital costsThe tricanter centrifuge

[Related Keywords : decanter centrifuge, 2 phase decanter, 3 phase decanter]

ABB Gauge Pressure Transmitters 266GDT 266GRH 266GRT 266GSH 266GST 266HDH 2600T Series

• Min. Order:  

  1 Piece

• Price:  

  US$ 286

• Place of origin:  

  United States

• Supply Ability:  

  200pcs per month

Max. 10 MPa N-AB Differential pressure Adjustable from 0.6 to 7.5 kPa Max. 7.5 MPa N-AD Differential pressure Adjustable from 7 to 170 kPa Max. 41 MPa N-AE Type Differential pressure with remote seals Adjustable from 10 to 170 kPa Max. 6.4 MPa N-BC Absolute pressure Adjustable from 2.5 to 170 kPa Overrange limit 2.5 MPa N-BD Absolute pressure Adjustable from 1.2 to 7.5 kPa Overrange limit 0.5

[Related Keywords : ABB, pressure transmitter, deltapi N series]

Ultrasonic Vibrating Screen

• Min. Order:  

  1 Set

• Price:  

  US$ 1000 ~ 10000

• Place of origin:  

  China

Max ultrasonic power: 50 Weff 100 Weff or 200 Weff l Output voltage: 600 Veff (limited) l max. output current: 1.0 A (limited) l Output frequency: 33 - 37 kHz (frequency variation) l Protection type: IP65 l Surge (voltage) category: II l Pollution level: 2 l Weight of model: model 230 V: 3.6 kg l model 110 V: 3.6 kg l Dimensions W x D x H: 280 x 170 x 125 mm l Electric connection: 90-250VAC / 2A

[Related Keywords : Screen]

GCAN-PLC Supports CANopen/ Modbus RTU/ Modbus TCP, Can Be Used As Master or Slave

• Min. Order:  

  1 Set

• Price:  

  US$ 233

• Place of origin:  

  China

Brand:GCANModel:GCAN-PLC-400/510/511Feature:1.Programming software: OpenPCS;2.Support Ethernet, RS232/485, CAN Bus interface;3.Support CANopen protocol master/slave station;4.Support Modbus RTU/TCP protocol master/slave station;5.Support 5 language of IEC61131-3 standard;6.Support digital&analog and special expansion IO module;7.Max 32 expandable IO modules with extra power modules;8.Configuratio

[Related Keywords : plc control unit, embedded plc module, expandable remote plc, safety plc modul]

Steel Pipe Hardening Furnace,Steel Pipe Hardening Equipment

• Min. Order:  

  1 set

• Price:  

  USD 10000

• Place of origin:  

  China

• Price Condition:  

  FOB Tianjin

t x 468.5mm 2. φ25.4 x 1.4t x 1113.0mm 3.φ25.4 x 1.8t x 900.0mm 4. φ27.2 x 1.8t x 543.0mm 5. φ31.8 x 1.4t x 479.0mm 6. φ31.8 x 2.0t x 669.0mm 7. φ31.8 x 2.0t x 820.5mm 8. φ34.0 x 2.6t x 937.0mm 9. φ35.0 x 2.6t x 1108.0mm [Machinery specifications] Quenching Max. 60mm/s Feed type Pinch roll method [Major machinery points] Number of carry-stock Approx. 15 Pin

[Related Keywords : steel pipe hardening, steel pipe hardening furnace]

Servo Four Column Deep Drawing Hydraulic Press

• Min. Order:  

  1 Set

• Price:  

  US$ 36000

• Place of origin:  

  China

• Supply Ability:  

  100

Max.strokemm350450560560560560560600600700Blank holding cylinderRated capacityTon15356060759090150150180Max.strokemm175200260260260600260300300350Knocking out ejectorRated capacityTon2355555101010Max.strokemm150180200200200220220250250300Open heightmm6007309001000900900900100012001500Height of fixed working tablemm990105510801100110012001200155016001700Approaching speed of M.W.T.mm/s1952202102102

[Related Keywords : deep drawing hydraulic press]

Seaweed Macrocystis Pyrifera Integrifolia Choped Brown From Peru

• Min. Order:  

  100 Ton

• Price:  

  US$ 3

• Place of origin:  

  Peru

• Supply Ability:  

  50 to 200 ton per month

t hesitate to contact us.Sample-free, cost of air freight importer, send your account number of courrier preferred.Description Specifications Seaweed for alginate extraction. Detailed Product Description: Product type: Seaweed Variety: Lessonia Nigrescens Style: Dried Processing type: Chopped Drying process: Sun Moisture content: not exceeding 15% Impurity: 2 % max %3 Cut size: 04 mm ~ 25 mm 04 m

[Related Keywords : seaweed macrocystis]

Compressed Air Water Remover - WELL AIR

• Place of origin:  

  Korea

T Max flow rate(liters/min) 150 400 1200 Pressure Drop(Mpa)(kgf/cm2) 0.00~0.05(0.0~0.5) Working pressure range(kgf/cm2) 0.1~1.0(1.0~10.2) Proof pressure(kgf/cm2) 1.5(15.3) Liquid temperature (Surrounding temperature)(°C) 5~65 Automatic drain(Rc) AD-32 Drain diameter(Rc) 1/4 Connector diamter(Rc) 1/4 3/8 3/4 Weight(kg) 0.59 1.11 2.79 Dimensions Installation WELL AIR doesn't reduce humidity Sinc

[Related Keywords : air water remover]

2000T/2500T Steel/Wood Door Skin Embossing Hydraulic Press Machine

• Place of origin:  

  China

T 1 Nominal force kn 25000 2 Max working pressure of liquid Mpa 25 3 Max opening height mm 600 4 Oil cylinder max stroke mm 500 5 Return force kn 360 6 fast down Slider speed slow down return mm/s 45-50 7 mm/s 8-12 8 mm/s 45-50 9 Worktable size mm 1500*2500 10 Motor power kw 60 All parameters can be customized Applications: Door samples by 2500T Iron Metal Steel Door Skin hydraulic Press Machin

[Related Keywords : door press machine, steel door press machine, wood door press machine, 2500T door press machine]

CNC Real Genuine Leather Digital Cutting Machine Oscillating Knife Vibrating Blade Leather Cutter

• Place of origin:  

  China

Description & Specifications of standard single head oscillating knife cutting machine: X working size 1600mm, if with double heads such as creasing wheel or other tools, working size will be 1500mm-1550mm Y working size 2500mm Z working size 10mm max Cutting head cnc oscillating knife cutting head Display way English LED touch screen Machine table Aluminum bellow Suction Table with 9 suction

[Related Keywords : leather cutting machine, cnc leather cutter, real leather cutting mach, genuine leather cutter]

FD Series Taper Medium Speed CNC Wire Cut EDM

• Min. Order:  

  1 set

• Price:  

  USD 13200

• Place of origin:  

  China

• Price Condition:  

  FOB Shanghai

• Supply Ability:  

  21 Set/ Sets per Month

max .thickness mm 400 600 (can agrade1000) Workpiece max.weight kg 600 1400 2300 4000 Machine weigh KG 1600 2400 3100 4000 Max .taper cutting ±30 (need install wire guide) Pulse equivalent mm 0.001 Wire speed m/s 1-15(speed adjustment by frequency conversion) Overall processing speed mm2/min 60 The fast processing speed mm2/min 120 The best Roughness Ra 1.0 Wire diameter 0.10-0.20 Composite mach

[Related Keywords : EDM machine, CNC Wire Cut, Molybdenum wire, electric spark]

Destacker

Features Easy to loading in operation time (2 Magazine) Can to separate working by Floter Dual slide guide allowing excellent durability Continuous line work during table change by 2 table Easy to loading by the Setting Jig Specification Model YDT-350 YDT-400 YDT-700 Work MAX size 350 x 300mm 350 x 300mm 350 x 300mm Thickness 0.5~4.5T 0.5~4.5T 0.5~4.5T Material EGI, SUS, ASC, SPP, etc Lifter Lift

[Related Keywords : Destacker, Robot, Processing Machinery]

Calender Machine

Specification WORKING SPEED 5~60 m/min HYDRAULIC PRESSURE MAX 50t WORKING TEMP MAX 230°C (sheel surface) ELECTRIC CAPACITY 67.2 KW MAIN MOTOR VS 10HP ~ 15HP HEATER 1.5 ~ 1.8KW ~ 15ea HYDRAULIC PUMP UNIT 3.5KW x 4P x 220V PLAIT DOWN MOTOR 0.75 KW x 2 HEATER BOWL SIZE Φ 280 ~ 300 x 1700~1800mm PAPER BOWL SIZE Φ 500 x 1650 ~ 1780mm MACHINE SIZE W4600 x L3900 x H3130

[Related Keywords : Calender Machine]

Digital Temperature Controller

• Place of origin:  

  Korea

T, R, S, B, L, N, U, WRe 5-26, PL-II R.T.D : Pt 100Ω, KPt 100Ω Direct voltage : 1~5V, 1~10V, -0~20mV, 0~100mV --------------(Free scale type) Sampling cycle 250ms Input display resolution Below decimal point of Input signal and Measuring range Input impedance T/C and mV input : Min, 1MΩ DC V : 1MΩ Source tolerable resistance Thermocouple : Max. 250Ω, Voltage : Max. 2 kΩ Lead wire tole

[Related Keywords : Temperature Controller, Temperature regulator, PID Temperature controller, Controller]