Up Display Wholesale

High-Speed Drilling EDMS

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

• Supply Ability:  

  2,500 sets per year

up to 300:1; penetration can be achieved directly from slopes and hook faces. Wenjie EDM small hole machine has the characteristics of precision linear bearing, low loss, high efficiency, convenient operation, two shafts equipped with a digital display device and fast processing speed, etc. Technical parameter More information please click here . Type WJD730 Electrode diameter（mm） Ф0.3-Ф3.0

[Related Keywords : High-Speed Drilling EDMS]

1500W LightWelder Portable Laser Welding Machine

• Place of origin:  

  Korea

Up to 4X faster than TIG Easy to learn and operate with highest process consistency High quality welding of thick, thin and reflective metals without distortion, deformation, undercut or burn-through Welding of dissimilar metal parts of different thicknesses Dramatically low heat input and minimized heat affected zone Minimal part setup and post-processing grinding or polishing Increased producti

[Related Keywords : laser welding machine]

Semiconductor Scrubber

• Place of origin:  

  Korea

SEMICONDUCTOR SCRUBBER BDC – Scrubber (BECO) is a device that purifies harmful gases discharged after being used in semiconductor and FPD (Flat Pannel Display) process equipment. It is a gas decomposition scrubber using plasma. Process capability Semiconductor process toxic gas treatment using high-temperature plasma PFC gases (NF3, SF6, CF4, C2F6, etc.) Corrosive gases (CI2, F2, BCI3, HBr, etc

[Related Keywords : semiconductor scrubber]

CNC Machining Copper

• Min. Order:  

  1 Piece

• Price:  

  US$ 20

• Place of origin:  

  China

up to 100% IACS (International Annealed Copper Standard). ETP copper originates from cathode copper, which refers to copper refined through electrolysis. Typically, this process involves filling copper compounds into a solution. Then, applying sufficient power helps in purifying the copper material. As a result, most ETP copper contains fewer impurities compared to other copper grades. Bronze It

[Related Keywords : CNC Machining Copper]

Mestar Ph/Orp Controller

Feature pH/ORP selection Auto Calibration - pH4,7,9 - Improved measuring precision by auto operation of liquid temperature - Full duplex communication by RS-485 - Available for recorder, indicator, PLC, computer Dead Band Setting - Securing the stability of pump operation Data Memory - Back up data memory by EEPROM LCD back lighting display - Recognized at dark place Self-Diagnostic

[Related Keywords : pH/ORP Controller, controller]

JQLASER 1530C Fiber Laser Tube and Sheet Cutting Machine 1000-4000w

• Min. Order:  

  1 Set

• Price:  

  US$ 12500

• Place of origin:  

  China

up and down height, thus achieving different sheet thickness cutting operationsEtherCAT bus systemThe display operation unit provides good man-machine interface to display various operation information, and the operation panelwith function keys for machine operationhigh power fiber laserUsing well-known fiber laser tools, whcih photoelectric conversion efficiency is high, power consumption is low

[Related Keywords : Laser Cutting Machines]

Pioneer 300 series

display system Fully automated image analysis & data calculation by computer. Contact Angle & Surface Energy Applications Coating assessment of the HMDS process. Evaluation of surface cleanliness processing Surface treatment for wafers Detection of organic contamination for wafers Specification Contact Angle 0~180 °, ± 1 ° accuracy Max. Sample size 300 mm Wafer (up to 12 inch

[Related Keywords : Auto, Contact, Angle, Analyzer]

2. Paper Envelope Converters

1) Mechanical Die Cutter FEATURES : Dual pressure operation and stepless pressure control. One Piece Cast Iron Frame. convinient knife changing system, No Carbon Electronic clutch and high accurate Worm Gear Box. Hard-chrome plated table, table slot covering, optical Cut-line indicator. Digital display available and possible to choose one of three units; Metric, Inch & Shaku. Two hand cut releas

[Related Keywords : Mechanical Die Cutter]

Gear Type Liquid Level Transmitter (SGL)

• Place of origin:  

  Korea

• Price Condition:  

  FOB

R/I converter outputs 4~20mA DC analog signal by using the built in potentiometer. Features: Remote and local indications are available. Easy to carry and install. Compactness of this model permits installation in a cramped space where there is a limited headroom. Output: Dial Display/4-20mA ADC/Dial Display&4-20mA ADC Maximum applicable temperature: Up to +85C Wet part material: 304SS or 316SS

[Related Keywords : Transmitter, Magnetostric Type Liner Level]

Ultrasonic Plastic Welding Machine

Displaying various welding condition and information, controlling the welding time at 0.01 unit. Momory for welding conditions Available to save and read up to 10 memory welding condition, which makes easy for applying to various welding products. Self-chech for good or bad welding quality Welding quality control to check good or bad welding quality by itself according to the setting value range

[Related Keywords : welder, engineering, machine]

Digital Temperature Controller

• Place of origin:  

  Korea

display resolution Below decimal point of Input signal and Measuring range Input impedance T/C and mV input : Min, 1MΩ DC V : 1MΩ Source tolerable resistance Thermocouple : Max. 250Ω, Voltage : Max. 2 kΩ Lead wire tolerable resistance R.T.D : Max. 150Ω / wire (notice : Identical conductor resistance between 3wires) Input tolerable voltage ±10V (T/C, R.T.D, Voltage : mV DC), &plus

[Related Keywords : Temperature Controller, Temperature regulator, PID Temperature controller, Controller]

Plate Rolling Machine for Tank

• Min. Order:  

  1 Set

• Price:  

  US$ 100000000

• Place of origin:  

  China

• Supply Ability:  

  10000 Sets/Year

up the falling materials at the furnace joint of the three-roller bending machine in time. 3. Check whether the tank roller bending machine is off-track and whether the joint connection is intact. Adjust and repair in time. 4. The fire has not been completely extinguished at night, so someone needs to be on duty to prevent the fire from burning and damaging the equipment. 5. Mechanics should add

[Related Keywords : hydraulic roll bender]

Roller Hearth Continuous Furnaces

up, quick responsiveness, and minimizing heat dissipation loss with easier maintenance. Doubled production efficiency by multi transfer system. Our own developed zone structure system enables controlling the temperature with the difference of 1‹C to the width direction.. Our own intake/exhaust system enables the appropriate burn out even when loading racks. The cooling system equipped a

[Related Keywords : Roller Hearth Continuous Furnaces, RH]

Flute Laminating Machine

• Place of origin:  

  Taiwan

• Price Condition:  

  FOB

The LODESTAR series of laminating and mounting machines is specially designed for flute packaging, point of purchase, and display mounting. Adopting the flexibility of offset printing to enable laminating and mounting of the printed sheet to corrugated or solid fiberboard, to produce eye-catch graphics, also providing a strong and sturdy product. The equipment can be used on laminating and mounti

[Related Keywords : Flute laminator, die cutting, folder gluer, corrugated laminating]

Open Mill and Refiner XK550 XK400 XK660 XKJ-480

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

display (11) temperature control: copper rotary joint (12) electric control system: Delixi electrical appliances, rope pulling emergency braking (13) overall size: ~L15200×W4750×H2960mm (14) weight: ~100 tons A-4. Open Mill XK-250x620ZG-B(direct connect) Technology parameter Mill (XK-250ZG-B) Pressure and frequency of electricity 380V, 50Hz Diameter of roll Ø 250mm Width o

[Related Keywords : refiner, regenerated rubber machinery, equipment]