Place of origin:
China
for saw blade / core drill•Grinding Machine series for Diamond Segments•Brazing Machine series for saw blade / core drill•Sharpening Machine series for saw blade / core drill•Polishing Machine series for saw blade•Sandblasting Machine series for Diamond tools•Reaming Machine Series for Circular Saw Blades/drill bit•Root Finishing Machine series for circular Saw Blades•Inspecting I
[Related Keywords : diamond tools equipment, machine of diamond tools, diamond tools braze equipment, welding M/C diamond tool]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
Supply Ability:
10000piece/month
Low air pressure DTH hammer CIR110/CIR130 for well drilling Product Description Product data: Hammer length without bit 890mm Top sub thread API 2 3/8"REG BOX Outside diameter 112 mm Weight 48.5 kg Bit diameter 130-175 mm Working pressure 5-10 bar Air consumption 7-12 M3/min Bit shank CIR110/CIR130 Item Descriotion Part No. Item Description Part No. 1.Top sub KQ130B-01 8.Valve KQ130B-08 2.Cap K
[Related Keywords : well drilling, dth hammer, Low aiir pressure Dth, dth bit]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
The cemented carbide nozzle is one of the important components for the diamond drill bit, tungsten carbide drill bit nozzle apply to flush, cool and lubricating the tips of the drill bits, the carbide nozzles also can clean stone chips in the well bottom with drilling liquid in the working conditions of high pressure, vibration, sand and slurry impacting during oil and natural gas prospecting. Ca
[Related Keywords : Carbide Nozzle, High Quality, PDC, Drill Bits]
Business Type
Manufacturer
Location
Hunan, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
US$ 1
Place of origin:
China
1. 100% virgin raw materials. 2. Various kinds of grades are available based on customer's application. 3.Precision grounding and high polishing process 4. High wear resistance, high hardness and impact toughness.
[Related Keywords : Nozzles, Roller Cone Drill Bits, Oil gas industry]
Business Type
Supplier
Location
陕西省 [ CN-SN ], China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 600000
Place of origin:
China
1.Hybrid cutter design,special for foundation work, to improve the abrasive resistance of bits.52 pieces tungsten carbide cutters,7 rows, to reach the full bottom hole coverage. 2.Full coverage design can protect the body of cone, increase of service life,keep the cone from worn by rock debris. 3. Our Advantage ----adequate stocks ----competitive price ----timely delivery ----factory direct 4.P
[Related Keywords : Cone Bit Cutter]
Business Type
Manufacturer
Location
Hebei, United States
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
It is connected between the diamond bit and the core tube to enlarge the aperture and trim the hole wall to ensure that the aperture does not shrink. Because of the small difference between the diameter of the diamond bit and the outer diameter of the core pipe, the gap between the hole wall and the core pipe is reduced, the water is blocked, and the drilling is easily stuck
[Related Keywords : rimer]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
It is aluminium alloy sintering mould and steel sintering mould. Sintering mould are spare parts of sintering machine, for making diamond segment and diamond saw blade, diamond grinding wheel, diamond drill bit.
[Related Keywords : tension machine]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Piece
Price:
US$ 950
Place of origin:
China
DSP, FPGA memory, drivers and various interface circuits. It has a 32-bit microprocessor, DSP digital signal processor, FPGA programmable logic devices and mass memory. We has a deep understanding of our customers' needs and a "customer-centric" service philosophy to provide the best solutions for our customers, with the goal of providing satisfactory customer service and after-sales support.
[Related Keywords : Abb robot, ABB 3HAC044168-001/00, SMB Board, Abb]
Business Type
Supplier
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
bit depth, the deformation of the strip also will increase,when the deformation reaches a certain extent, pressurized parts will fracture. Main featureof side trimmer：The structure with double head cantileverrotary hybrid power shear;Blade is double-edged, use end-face grinding, hydraulic nut locking；Opening width adjustment: stripshearing width adjustment driven by two oil cylinders, whichvi
[Related Keywords : side trimmer]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
https://www.leadingtool.com/product-thin-wall-drill-bits-for-glass-tile.html Super Thin Wall Drill Bits For Granite, Engineered stone, Glass And Porcelain Tile. Our Thin Wall Core Drill Bits are used to drill glass, ceramics, porcelain, ceramic, porcelain tile, limestone, slate, marble, granite, stone, and fiberglass, etc. Product Description Sintered (metal bond) Diamond Core Drills are the Fine
[Related Keywords : thin drill]
Business Type
Manufacturer
Location
gaungdong, Reunion
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Set
Price:
US$ 6581
Place of origin:
China
bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories. PARAMETERSElectrical parametersPower supplySingle phase AC 220V±10% or 110V±10%, 50/60HzACAC Voltage outputrange200mV, 400mV, 2000mV, 4000mV, 20V, 100V, 200V, 500V, 1000V; max 1050VRange 20V
[Related Keywords : Power plant, Storage 500groups, 2-31 harmonic wave, working frequency40Hz-1KH]
Business Type
Manufacturer
Location
北京, China
Employees Total
Above 1000
Annual Revenue
More than 100,000,000
Min. Order:
1 Unit
Price:
US$ 1
Place of origin:
Germany
bit rotor position sensor, system accuracy of angle measurement -120 arcsec ... 120 arcsec Brake holding torque 2.5 Nm Operating voltage DC for brake 24 V Brake current consumption 0.46 A Power consumption, brake 11 W Brake coil resistance 52.4 Ohm Brake coil inductivity 700 mH Brake separation time ≤35 ms Brake closing time 10 ms DC brake response delay ≤2 ms Max. brake no-load speed 10000 r
[Related Keywords : EMMT-AS-60-S-LS-RMB, FestoEMMT-AS-60-S-LS-RMB, Festo Servo Motor, Festo 5242199]
Business Type
Supplier
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Box
Price:
US$ 1
Place of origin:
Germany
Supply Ability:
5000 set
for this? Product Description Warranty Description 6ES71354GB010AB0 DISCONTINUED BY MANUFACTURER 10/01/2023 ELECTRONICS MODULE SIMATIC DP FOR ET 200S 2 ANALOG OUTPUT 15 MM WIDTH +/-20 MA 4-20 MA 13 BIT CYCLE TIME LESS THAN 1 MS WITH SF LED (GROUP FAULT) REPLACES: 6ES7135-4GB00-0AB0 FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED Please contact me get more information VK/Whatsapp/
[Related Keywords : 6ES7135-4GB01-0AB0, 6ES7135-4GB01-0AB0 1, 6ES7135-4GB01-0AB0 2]
Business Type
Supplier
Location
Hubei, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
100
driver without sacrificing power or control ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials Tri-LED Lighting for maximum workspace visibility Compact Size (4.47") for access in tight spaces 4-Mode Drive Control 2000 in-lbs of torque 3900 RPM Single Handed Bit Insertion for Ease of Use 3.8lbs (with battery)
[Related Keywords : tools]
Business Type
Supplier
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
Supply Ability:
60 sets per month
bit broach, which can be processed simultaneously sample two gaps: a V-type and a U-type (also two V-or U-notch). Whether processing V-or U-notched ATC is not required, processing one sample gap only need 10 seconds, it is easy to operate and reliable for processing the V-and U-gap, it can separately meet GB2106-80 “metal Charpy (V type notch) impact test method” and GB229-2007 “metal Charp
[Related Keywords : broaching machine, broach cutter, notch broaching machine, notch broach machine]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
More than 100,000,000
Min. Order:
5 Acre
Price:
US$ 46
Place of origin:
China
For VMEbus connections, the VME-PCI bridge UNIVERSE CA91C142 is used by Tundra with an internal clock rate of 33MHz. The design of the VMEbus interface CA91C142 allows the board to operate as a slave or as a master on VMEbus. If the board of directors operates as a host, it supports Level 4 arbitrator PMC-CADDY to use data widths up to 32 bits and address signals on the 32 VME b
[Related Keywords : 500CIM05, 1MRB150077R1/B, 500CIM05 1MRB150077R1/B]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
100 Carton
Price:
US$ 194
Place of origin:
China
bit microcomputer chip processor,real-time current display6.Advanced high-efficiency inverter technology,30khz,high working frequency7.Usable for generator, suitable for field operation8.Automatically save the parameters of the last operation9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11
[Related Keywords : weldingmachine, plasmacutter, soldadorasinverter]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 1200
Place of origin:
China
Supply Ability:
10000 pieces per month
Product Description NZG-31 Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use. Specification itemvalueTypeSleepersMaterialStainless S
[Related Keywords : drilling machine, rail drilling equipment]
Business Type
Manufacturer
Location
Hubei, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
20 Ton
Price:
US$ 4.1
Place of origin:
Vietnam
Supply Ability:
40 tons
Dried pangasius fish skin - Dried fish skin for collagen extraction 1. Specifications - Color: nature or de-color - Odor: a bit fishy - Crude protein: 75-78 % - Moisture: 10%-15% max - Impurity: 0.5% max - Origin: Vietnam - Drying method : Solar heat ( under sunshine) 2. Packing: 20 kg/PP Amy +84 383 655 628
[Related Keywords : fish skin, pangasius fish skin, basa fish skin, dried fish skin]
Business Type
Manufacturer
Location
Binh Duong, Vietnam
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Min. Order:
1set
Place of origin:
China
Price Condition:
FOB Tianjin
Supply Ability:
500pcs/month
bit resolution Off-line calibration - eliminates the need for loop calibrators Available in multiple power supply configurations : AC 120/230V; DC 12/24V Onboard manual jog buttons AC controller includes speed control DC controller includes : Torque trip with relay output Dynamic braking for accurate stopping we supply many kinds of qualified electric controlpanel introducing Bernard technology
[Related Keywords : Bernard feedback board, GAMK locator, Main board, circuit board]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
 |
Recommended Content
