Load Switch Wholesale

Induction Hardening Machine

• Place of origin:  

  China

switches and time relays. The loading and unloading positions, heating positions, cooling positions and heating distances are all accurately positioned by servo motors. Quenching time, lifting speed, rotation speed, etc. can be directly input and controlled from the CNC panel. 8: More than 60 quenching programs can be stored for users to call at any time. It is especially suitable for complex pro

[Related Keywords : Hardening Machine]

EKAQ Proofing Machine

• Place of origin:  

  China

EKAQ proofing machine is especially designed for checking the quality of a newly made gravure cylinder before printing. Rubber roller drives cylinder rotation to avoid the slip action. Load and unload of gravure cylinder is controlled by Step switch. Auto self-control system for blade angle and lock.Monitor display and single completely job can be finished automatically while guarantee satisfacto

[Related Keywords : Proofing Machine]

Electrical Discharging Saw Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 185000 ~ 503000

• Place of origin:  

  China

• Supply Ability:  

  10 sets per years

loading of the servo motor, there are the weight balance parts connected with the device of the steel electrode by a roller chain inside of the upright columns. The limited switches are installed on the device of the motorized electrode. And there is a traveling ruler near to the device for the operator to check the travel during working. 2、The system of working liquid The working liquid is ta

[Related Keywords : electronic discharge sawing, ELECTRICAL DISCHARGE SAWING, EDS, ELECTRICAL DISCHARGE SAWING MACHINE]

Festo Servo Motor EMMT-AS-60-S-LS-RMB 5242199 in Stock

• Min. Order:  

  1 Unit

• Price:  

  US$ 1

• Place of origin:  

  Germany

load speed 10000 rpm Brake max. friction work 5600 J Total brake friction 615 kJ Mass moment of inertia of brake 0.074 kgcm2 Switching cycles holding brake 10 million idle actuations (without friction work!) Mean time to failure (MTTF), subcomponent 190 years, rotor position sensor Email: anna at cwlyautomation dot com Tel: +86 13667121125 whatsapp/ vk/ telegram also available Company: Hongkong C

[Related Keywords : EMMT-AS-60-S-LS-RMB, FestoEMMT-AS-60-S-LS-RMB, Festo Servo Motor, Festo 5242199]

Roll Label Cutter VR30

• Place of origin:  

  China

switching to continuous materials. Easy learning software will allow you to be up and running in minutes. How it works... The dedicated software Label Studio will generate the layout and create the marks automatically on design files, the corresponding print file will be produced by appropriate rotary printing system. Once loaded, the VR30 roll label cutter will precisely plot all elements from

[Related Keywords : Roll Label Cutter]

Superior Quality A1-17 Atmosphere Sintering Furnace

• Place of origin:  

  China

• Supply Ability:  

  423set/year

Superior Quality A1-17 Atmosphere Sintering Furnace Technical Features 1.Maximum Heating Temperature: 2300℃ 2.Integrated hot press sintering and vacuum sintering in one furnace 3.Horizontal design with front-open chamber ensures easy loading and removal of mold. 4.Vacuum degree (10^-3 Pa range) and Inert gas (Ar, He, N2) operation. 5.Fully automatic operation by PLC and touchscreen HMI. 6.Simul

[Related Keywords : sintering furnace]

QFP Package Lead Frame Precision High-speed Stamping Production Line

• Min. Order:  

  1 Set

• Price:  

  US$ 75000~80000

• Place of origin:  

  China

• Supply Ability:  

  10 Set/ Sets per Month

switch should be turned on and the machine adjustment button switch should be in a reset state before it can officially work, otherwise the feeding switch and mold fault signal will lose control. 6. During the formal punching process, due to the variation of the static error rate of the main motor with different loads, an electromagnetic counter set on the control board can be used to correct the

[Related Keywords : stamping production line, high-speed stamping line, lead frame stamping line, precision stamping line]

Synchronous Protection Device SYN5201A-Z V217 3BHB006714R0217

• Min. Order:  

  15 Bag

• Price:  

  US$ 85

• Place of origin:  

  China

switch on the board is located at the bottom of the board. They are used to set interrupts, data formats, and memory addresses. The service interface (D-sub 9) for loading firmware is also located in this area. 　　ALSPA CP80/A800 (AEG Logidyn D) settings ALSPA CP80/A800 is a high-performance name control system compatible with Alstom, CP80/A800, and Logidyn D from AEG. It is a VME based system

[Related Keywords : SYN5201A, 3BHB006714R0217, SYN5201A-Z V217 3BHB00671]

CUT30/45pfc/CNC/60/65/80/100/120

• Min. Order:  

  100 Parcel

• Price:  

  US$ 240

• Place of origin:  

  China

switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,35khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,over voltage,under voltage protecti

[Related Keywords : Plasma cutting]

Paper Edge Protector Cutter

• Min. Order:  

  1 Set

• Price:  

  US$ 10000

• Place of origin:  

  China

Load the edge protector: The operator of the machine first loads the edge protector onto the machine. The edge protector is placed in the cutting area of the machine, which is typically a slot or opening where the material is fed through. Position the edge protector: The operator then positions the edge protector in the cutter using guides or other positioning mechanisms to ensure the material is

[Related Keywords : Paper Edge Protector]

CNC Machine Tool PD-ST Medium-Speed Wire-Moving Control System

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

• Supply Ability:  

  2,500 sets per year

switch of machining electrical gauge; 2. The integrated design combines computer control, high-frequency power supply, driving power and electric equipment for machine tools; 3. The dedicated digital control chip design ensures a stable and reliable high-frequency pulse output; 4. The touch-type keyboard design makes it easy to operate and convenient to adjust and makes digital parameter display

[Related Keywords : CNC Machine Tool]

Water Cooled Chiller Excellent Cooling Chiller 5HP R22/R407C Injection Plastic Chiller

• Min. Order:  

  1 Unit

• Price:  

  US$ 300

• Place of origin:  

  China

• Supply Ability:  

  3000units/thper mon

loads. Each model is equipped with a range of safety features, including motor overload protection, phase loss and phase reversal alarms, anti-freeze thermostats, pressure gauges, and more. These chiller units demonstrate excellent performance and have a longer lifespan. Throughout the entire operating cycle, a series of steps based on the fundamental principles of heat exchange are followed. The

[Related Keywords : water cooled chiller, industry chiller, air cooled chiller]

Dual Cone Calorimeter, ISO5660, ASTM E1354

load cell with quick electronic tare facility. The weight of the sample holder is zeroed electronically by pressing one button. Other manufacturers use a mechanical load cell design, which is laboriously zeroed by physically turning a screw on the side of the load cell. 4. The FTT load cell is housed in an enclosed case to reduce the effect of temperature change. Pieces of molten specimen can som

[Related Keywords : cone calorimeter]

SCM3000 M2M Chip Personalization Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 900000 ~ 1500000

• Place of origin:  

  China

loaded. 2. Tape Input: tape in 12mm is supported, 8mm, 16mm and 24mm is extensible; Compatible with tape rolls in 1000pcs and 3000pcs. 3. Compatible with tray and tape input. Chip Rotating Module 1. Equipped with 2 chip storage stations. 2. The chip direction can be automatically adjusted by forward & reverse 90° and forward. 3. 180° rotations by identifying the mark point on the chip. IC Perso

[Related Keywords : personalization machine]

Intelligent Var Compensator

switching phenomenon Energy efficient and protects electronic device Protects the switching devices and condenser, extends the life cycle of equipments Easy to expand the capacity - Simple addition of module expands the capacity Harmonic wave filter function (optional) Load balancing (optional) Application Load Irregular reactive power generating load and flicker generating loads, such as welding

[Related Keywords : Harmonic Filter, var compensator]