Min. Order:
100 Ton
Price:
US$ 2530
Place of origin:
Thailand
non-toxic and harmless. 2. After 125° high-temperature steam sterilization, it can still maintain good performance and dimensional stability without affecting transparency. 3. It has very low water permeability, air permeability and migration, especially because the water vapor permeability of the liquid in the package caused by temperature is extremely low, so that the concentration of the
[Related Keywords : film composite films]
Business Type
Supplier
Location
Sakon Nakhon Province, Thailand
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
non-condensable gases, can reliably guarantee a reduction in the residual content of O2 < 5 ppm (volume) with a CO2 volume fraction of at least 99.998% . The electrical system of the CO2 recovery unit consists of a decentralized electronic control panel and a low voltage power cabinet. The state-of-the-art electronic control panel allows you to monitor and control the operation of the unit in a c
[Related Keywords : Co2 recovery plants]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Set
Price:
US$ 500
Place of origin:
China
non-toxic surface for food contact.Soldering : Tin plating areas to improve solderability.Bearing Surfaces : Tin plating to improve lubrication and reduce friction.Electrical Contacts : Providing a corrosion-resistant and conductive surface for electrical contacts.Touch-up and Repair of Damaged Tin Coatings: On manufactured goods.Sealing electrical connections: Tin plating can create gas tight se
[Related Keywords : Plating tin device, Tin Plating equipment, brush tin]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Short Description: Model NO. WM-B104 Certification CE Condition New Specification 25mx2mx2.35m Trademark WM Origin China Production Capacity 30sets/Year Product Parameter Product size M: 680X450 L: 800X650 XL: 950X760(Customixed according to customer requirement) Product structure Product structure: upper & lower tissue, cotton core (mix with SAP), cover sheet hydrophilic non-woven , ADL (Acquis
[Related Keywords : Period Pants machine]
Business Type
Manufacturer
Location
Fujian, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
maintain: The design of the valve takes into account the convenience of operation and maintenance. For example, adopting a graphic design facilitates the installation of locks and daily maintenance; The lock hole design on the valve stem can prevent accidental operation by non operators; At the same time, the opening and closing instructions of the valve are accurate and precise. 4. Durability: D
[Related Keywords : Valve]
Business Type
Manufacturer
Location
浙江, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Set
Price:
US$ 28600 ~ 58000
Place of origin:
China
Supply Ability:
30 set per month
maintained for a long time after conventional sample treatment. 4. It can be perfectly matched with the automated assembly line to improve production efficiency According to the user's on-site needs, the optimal assembly line production plan is configured to greatly improve production efficiency. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove sur
[Related Keywords : LCD Plasma Cleaning, PTFE Plasma treatment, PCB Plasma Desmear, IC substracts Plasma trea]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
4 Barrel
Price:
US$ 585
Place of origin:
China
maintains its current value and which outputs use fallback values ? Fieldbus fault protection delay time - FBM wait for communication length from CP before entering a communication fault For redundant modules, the fail safe backup data and mask options are configurable. An additional option is provided so that module data will fall back to zero (0) when the module is offline due
[Related Keywords : PFSK160A 3BSE009514R1]
Business Type
Supplier
Location
Shanxi, United States
Employees Total
501 - 1000
Annual Revenue
USD 5,000,001 - 10,000,000
Video
Min. Order:
1
Place of origin:
United States
Price Condition:
EXW
Supply Ability:
200 units per year
maintained and compared over time. Passwords provide security for the system, recipe editing, diagnostics, calibration and setup functions. Simple and easy to use menu screens which allow an automatic cycle to be easily defined and executed. Troubleshooting features which allow engineers and service personnel to activate individual subassemblies and functions. AWgage-200 Metal Thin Film Metrology
[Related Keywords : Mgage 300, Mgage 200, Metal Film Metrology, Suqare Sheet Resistance]
Business Type
Manufacturer
Location
California, United States
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
maintained at an elevated temperature to allow for plastic deformation. Uniformity: The rolling process should ensure uniform wall thickness and dimensions along the length of the pipe. Mechanical properties: Control of the material's mechanical properties, such as tensile strength and toughness, is essential. Sizing and Reducing: Process Objective: In this final step, the hot-rolled pipe is furt
[Related Keywords : Pipe Mill]
Business Type
Manufacturer
Location
Guangxizhuangzuzizhiqu, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
HEC (Hydroxy Ethyl Cellulose) is a non-ionic cellulose derivative that exhibits easy dispersion and rapid dissolution in water. It serves a multifaceted role in various applications, imparting functions such as thickening, colloidal protection, enhancing construction properties, facilitating wetting, and maintaining product stability to ensure superior quality. This versatile substance boasts a h
[Related Keywords : hydroxyethyl cellulose f]
Business Type
Supplier
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Min. Order:
7500 Piece
Price:
US$ 0.55 ~ 2.5
Place of origin:
China
non-ferrous metals. Anti-Rust Primer Anti-Rust Primer presents exceptional adhesion, hiding power, and elasticity, used for the surface of iron, aluminium and steel with anti-corrosive protection. Clear Varnish Clear Varnish formulated is spray varnish with 100% solvent-based, reversible acrylic co-polymer resin, made including fast drying acetone and a propellant. Glow In The Dark Sp
[Related Keywords : spray paint application]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
maintaining superior quality and regulatory compliance. Quality Control Service Process 01 Planning and Preparation The Quality control in production process begins with planning and preparation, which involves understanding the client’s requirements, setting quality standards, and preparing inspection checklists. 02 Inspection Execution The next step is the execution of the inspection, where
[Related Keywords : quality products made in]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
non-conforming products. Cost Efficiency: With our self-owned industrial park, we can achieve higher production and operational cost efficiency. This enables us to offer competitive pricing while maintaining high product quality and reliability. Customers can benefit from our production expertise and cost efficiency, ultimately reducing the overall project costs. Supply Chain Control: The advanta
[Related Keywords : Stamped Aluminum Parts]
Business Type
Supplier
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 1
Place of origin:
China
Induction heating equipment is relatively low-cost and easy to maintain, which can help to reduce the overall cost of manufacturing. Non-contact heating: Induction heating does not involve direct contact between the heating element and the workpiece, so the workpiece is not in direct contact with heat source, this will prevent the workpiece from deformation or oxidation.
[Related Keywords : Induction Heater]
Business Type
Manufacturer
Location
Sichuan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
non sintered products such as conductive coatings, electromagnetic shielding coatings, and low-temperature conductor slurries. Sintered medium temperature conductor slurry requires a spherical conductive phase, continuous and dense silver layer coating, and good oxidation resistance at a sintering temperature of 450-540 C. After sintering, the film layer maintains good conductivity and other prop
[Related Keywords : Copper Powder]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 20 ~ 999
Place of origin:
China
non-toxic, light in weight, excellent in mechanical strength, wear-resistant, and corrosion-resistant. Nylon machined parts are widely used in the manufacture of turbines, gears, bearings, impellers, cranks, dashboards, drive shafts, valves, vanes, screw rods, high pressure washers, screws, nuts, seals, shuttles, sleeves, sleeve connectorss, etc. Advantages of Nylon Material and Nylon Machined Pa
[Related Keywords : nylon machining]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
Korea
Non-uniformity when removing residual solvent - Inhomogeneous crystallization - Cause pollution / agglomeration when performs sintering or pulverization Major materials using hydrothermal synthesis Hydrothermal Synthesis (BaTiO3) 1) Properties : High dielectric constant and thermostability → ferroelectricity, piezoelectricity 2) Applications :Capacitor, thermistor, sensor, communication
[Related Keywords : Special Purpose Reactor, Continuous Reaction System, Hydrothermal Reactor, Catalytic Reactor]
Business Type
Manufacturer
Location
Daejeon, Korea
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Features of GRP Water Tank Excellent in Clean & Hygienic and, Non-leakage. Sectional GRP Water Tank for Easy to Design and Installation. GRP Water Tank always keep clean water. Samsung Sectional GRP Water Tank is designed to satisfy the basic requirements by using Glass Fiber reinforced Panel. Wide Range of Availability Available in various sizes to meet any customer demands. Clean & Hygienic No
[Related Keywords : grp water tank, water tank, grp tank, water tanks]
Business Type
Manufacturer
Location
Daegu, Korea
Employees Total
1 - 5
Annual Revenue
USD 1,000,001 - 2,000,000
maintained regardless the input voltage change of 180 ~ 260 Volt. (In general model, there is amplitude fluctuation of ± 10%, in case of input power change of ± 2%) 2 steps constant amplitude function Keeping constant amplitude with 2 steps amplification function of generator applied FET or IGBT and AVR device regardless loading condition. The most advanced digital generato The digi
[Related Keywords : welder, engineering, machine]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 set
Price:
USD 10000
Place of origin:
China
Price Condition:
FOB Tianjin
maintaining and repairing Advantages for steel slab heating furnace: 1.Wide frequency range from 1KHZ to 20KHZ,frequency can be designed to satisfy different size of theheated rods. 2.In the continuous heating process, the load inside the coil is stable , thus to overcome the great heatingpower change caused power by the great change of the load during the heating course from cool rod to1100
[Related Keywords : steel slab heating furnace, steel slab heating]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
 |
Recommended Content
