Panel Back Process Wholesale

Synchronous Protection Device SYN5201A-Z V217 3BHB006714R0217

• Min. Order:  

  15 Bag

• Price:  

  US$ 85

• Place of origin:  

  China

back line may not be extended as shielding may be interrupted and signal processing may be disrupted. The line braking resistor between the amplifier and the external must be shielded. Install all power cables with sufficient cross-section according to IEC 60204 (page 28) and use the required cable materials (page 53) to achieve maximum values. Cable length. 　　　Each SM128V occupies a single

[Related Keywords : SYN5201A, 3BHB006714R0217, SYN5201A-Z V217 3BHB00671]

AWGAGE-150 Metal Film Metrology

• Min. Order:  

  1

• Place of origin:  

  United States

• Price Condition:  

  EXW

• Supply Ability:  

  200 units per year

process results. The AWgage-150 allows calibration of the ohm and milliohm measurements within the software for maximum performance and accuracy. This provides a much easier and faster method to calibrate the instrument than by adjusting pots on the back of the traditional Sheet Resistance Measurement Instrument. The SOFTWARE can compensate for where the flat is on the carriage to locate the test

[Related Keywords : Thin Film Metrology, Metrology, M-gage 300, M-gage 200]

Carbon Fiber Press Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 5000 ~ 1000000

• Place of origin:  

  China

panel, two operating processes of fixed range and constant pressure can be realized, and it has functions such as pressure maintenance and delay. Application of Four-column Hydraulic Press for Carbon Fiber The carbon fiber press is suitable for hollow molding of carbon fiber in the 3C product exterior parts and sporting goods industry. The 3D curved surface is mainly used for forming the back cov

[Related Keywords : Carbon fiber press, carbon fiber making machi, hydraulic press for carbo]

Plate Bending Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 10000

• Place of origin:  

  China

process of the plate rolling machine in EZHONG plate rolling machine China is to operate the machine from the control panel (equipped with all control equipment and indicator lights) under the control of the operator. The system of the rolls bending machine must be stable. If something happens to the metal fabrication equipment, a big problem will occur after a few days, so how to choose a stable

[Related Keywords : Plate Bending Machine]

Fully Automatic Solar Laminator

• Min. Order:  

  1 Unit

• Price:  

  US$ 200000

• Place of origin:  

  China

• Supply Ability:  

  Monthly production capacity of more than 40 units

A fully Automatic solar laminator machine is the most important process in the whole solar panel production line. Solar module lamination is used to bond multiple layers of materials (Glass, EVA, Solar cell, Backsheet) together by heating &vacuum process in chambers of the laminator. Types of Fully Automatic solar laminator For Sale According to customer's demand, solar equipment manufacturer scs

[Related Keywords : vacuum laminator]

Cone Calorimeter, ISO5660, ASTM E1354

low oxygen sample analysis. Protection Doors - to screen the operator from smoke generated by hazardous samples. The doors allow normal air influx from the bottom for natural test area ventilation and test air input. The protection doors enclose three sides of the test area, a steel panel covers the back side, the exhaust covers the top side, and the test area floor covers the bottom side.

[Related Keywords : cone, calorimeter]

1500W LightWelder Portable Laser Welding Machine

• Place of origin:  

  Korea

back speed adjust through touch panel. If two weld metal gap more than 0.2mm that need filler wire. Weld method Flat position weld Horizontal position weld Vertical position weld Overhead position weld TECHNICAL PARAMETERS Model number: HS-HW1500 HS-CH1530 Working Area Continuous light output time (S) : Light out 60S, stop light 6S Laser power: 1500W Operating Ambient temperature:Min.10 ,Max. 4

[Related Keywords : laser welding machine]

Computer Single Head 12 / 15 Needles Automatic High Efficiency Shoes Hats Shirts Embroidery Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 4200~4450

• Place of origin:  

  China

• Supply Ability:  

  5000 sets / Year

panel is user-friendly with multi-task parallel 13.Mending function. (back and skip stitches) 14.Machine support DST, DSB etc. format 15.Online lettering with 10 kinds of popular fonts. 16.Built-in portrait photo(BMP,JPEG) embroidery function, automatically generate portrait photo. 17.Built in combination & segmentation of design 18.USB port with fast data transmission 19.Electricity: 100V/60Hz

[Related Keywords : single head machine, shoes embroidery machine, auto embroidery machine, high efficiency machine]

WJ-PFP510A

Features This machine is a hydraulic panel punching press that has been patented first in Korea and has been designed with the special emphasis on safety. The machine is capable of processing a stainless plate used for switch boards and s steel plate used for fire proof door. The operator can move the boards forth/back and left/right easily to process materials. In addition, the machine can

[Related Keywords : Panel Punching Press]

A+RS B+RS Series

• Min. Order:  

  1set

• Place of origin:  

  China

• Price Condition:  

  FOB Tianjin

• Supply Ability:  

  500sets/month

back to turn normally. Auto switch function The actuator can implement three kinds of switch function – “Distant- automatic / distant -manual /local”. It can also operate electrically and manually on the spot. The pros and cons of switch function The control panel program has the pros and cons of switch function that satisfied different situations on-the-spot. Dynamic braking Th

[Related Keywords : 110V-460Velectric valve actuator, part turn actuator, quarter turn electric actuators, actuator 110V - 440V]

Portal Type CNC Flame Plasma Cutting Machine ZLT-C

• Min. Order:  

  1

• Price:  

  USD 15000

• Place of origin:  

  China

• Price Condition:  

  FOB Guangdong

• Supply Ability:  

  150 SET

processing program. Suitable for: CNC cutting machine widely used in the automobile, shipbuilding, engineering machinery, petrochemical equipment, light industry machinery, aerospace, pressure vessel and adornment, large panels manufacturing and other industries, suitable for carbon steel (flame cutting), stainless steel and copper, aluminum (plasma cutting), sheet metal cutting and feeding oper

[Related Keywords : Portal type Cnc flame]

Sandblasting Room BLASTLINE

• Place of origin:  

  Germany

process to the Elevator Separator system. For this system, you will need a pit measuring H: 1000 x L: 1200 x W: 1200 next to the cabinet. ABRASIVES RECOVERY SYSTEM: The abrasive passes to the separation system at the back behind the collection system in the cabin floor. We also have 2 types of systems here. 1 – Elevator Separator System 2 – Vacuum System We have different type of abrasive re

[Related Keywords : Sandblasting, surface treatment]