Min. Order:
1 Piece
Price:
US$ 280 ~ 300
Place of origin:
China
pump that can reach a high vacuum state in a short period of time, which greatly enhances the efficiency of defoaming. Secondly, the equipment has a built-in precision pressure control system, which can adjust the vacuum level according to the sensitivity of different materials, thus avoiding damage to the materials. In addition, our vacuum defoamer also has a one-button operation function, which
[Related Keywords : Vacuum defoamer, mixer]
Business Type
Manufacturer
Location
Guang Dong (广东省), China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 5000
Place of origin:
China
Price Condition:
FOB
Supply Ability:
40 sets
RuiLin Mud Cleaner Descriptions The mud cleaner includes a desander, a desilter, a pressure gauge, a cyclone, a underflow groove, a drilling fluid vibrating screen, a support and a base, and is characterized in that, a butterfly valve is provided between main liquid inlet pipe and liquid outlet pipe of desander and desilter, the base is provided with the sliding groove, the vibrating screen is m
[Related Keywords : supply good desander, desander manufacture, desander factory, desander for drilling fluids]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Control: Ammeter, Working indicator, Power indicator, On/Off, Oxygen flow meter, Voltmeter, Oxygen outlet, Fuse, Power input. SPECIFICATIONS 3-20LPM oxygen generator Model Unit QJ-OX3L QJ-OX5L QJ-OX10L QJ-OX15L QJ-OX20L Oxygen flow rate LPM 3 5 10 15 20 Oxygen purity % 92+-3 Dimension cm 55*40*73 55*40*80 55*40*116 55*45*135 55*45*135 Output oxygen pressure Mpa (Bar) 0.1(1) Voltage V 220/110 Air
[Related Keywords : Oxygen Generator]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
6 - 10
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
China
control cabinet 4 6 Tensioning machine (60T) 2 Tensioning machine (30T) 4 7 Tensioning rod 20 8 Model-50 oil pump 10 9 Heading machine 10 10 Steel bar straightening-cutting machine 2 11 ф2500, 2T steel wire roll unfastening device 2 12 Reeling machine (inner and outer ring) 2 13 Air pressure gun for mould closing 30 14 Air compressor 10m3 2 15 Mixing station 2 16 Material supply vehicle 4 17 10T
[Related Keywords : Concrete Pole Machine, Concrete Pole Line, Concrete Pole making machine, Spun pole making machine]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
6 - 10
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
Korea
pressure is too high or low (Stop working automatically) Sense gas leaking Protecting for Over-Current Built-in circuit for inversion prevention and electricity detection Preventing excessive cold water T/C (Stop working automatically) Alarm when the temperature is high or low (Stop working automatically) Alarm flow sensor; Sense of water flow (Stop working automatically) Standard Specification
[Related Keywords : Chiller, Air cooled chiller, Waater chiller, Cooling system]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
100,000 pcs/day
pump for automatic timing lubrication to ensure the service life of the bearings. Each unit has an independent hydraulic oil gauge, and the required pressure can be adjusted individually as needed, and the adjusted pressure is clearly visible. The hydraulic oil and mold are cooled by water cooling to ensure that the hydraulic oil and mold do not overheat and achieve efficient production. By using
[Related Keywords : Rotor Casting Machine]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
pressure, vacuum, water pressure, and heating. 4.6 The heating power supply uses a single-phase thyristor power supply, and is powered by low voltage and high current. Heating power 60KVA. 4.7 There is a fan cooling system in the control cabinet. 5. Water cooling system: The furnace body, furnace door, vacuum device, water-cooled electrode, and heat exchange system of the furnace require cooling
[Related Keywords : Vacuum furnace]
Business Type
Supplier
Location
陕西, China
Employees Total
6 - 10
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Set
Price:
US$ 185000 ~ 503000
Place of origin:
China
Supply Ability:
10 sets per years
Controller German Siemens German Siemens German Siemens Feeding motor German AC servo motor German AC servo motor German AC servo motor III. Introdution of Electrical Discharge Sawing machine. 1、Working theory The machine utilizing anodic machining principle, cutting special steel that can’t be easily cut, such as high-temperature heat-resistant alloys, high chromium, high nickel alloy, tita
[Related Keywords : electronic discharge sawing, ELECTRICAL DISCHARGE SAWING, EDS, ELECTRICAL DISCHARGE SAWING MACHINE]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Piece
Price:
US$ 2855
Place of origin:
China
pump, valve, sensor processing parts, bearing and other goods, mainly used in chemical industry, power plant, steel and other areas. Yoyik can offer many spare parts for power plants as below: #DF-Servo control device TY9100J-DF pressure hose SMS-10/20-1829mm-C transfer oil pump 3Gr30×4 rubber coupling PVH98Q1C-RSF-1S-10-C25-31 mechanical seal for pump 100-65-260 hydraulic pump piston A10VS018DF
[Related Keywords : Servo Control Device]
Business Type
Supplier
Location
Sichuan, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
2 Set
Price:
US$ 5000 ~ 15000
Place of origin:
China
Supply Ability:
100 sets /month
I. Specification ModelTD703AD 1 Worktable Dimension 550×360㎜ 2 Travels X×Y×Z 350×250×（380+300）㎜ 3 Max Load on Work Table 350kg 4 Max Pressure of Working Water 14Mpa 5 Flume dimension 800*450mm 6 Max Work Current 30A 7 Electrode Diameter Ф0.15-Ф3mm 8 Max Process Deep 400mm 9 Max Processing Speed 30-60mm(Ф1.0) 10 Max Diameter to Deep Ratio ≥300 11 Workpiece Material Steel/Alumi
[Related Keywords : EDM machine, small hole drilling, CNC machine, wire cut machining]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
6 - 10
Annual Revenue
More than 100,000,000
Min. Order:
1 Set
Price:
US$ 8900
Place of origin:
China
Supply Ability:
1000 sets/year
pump Features 1. Compact design 2. High performance/full vacuum 3. Vacuum pump mounted together with degasser vessel 4. Internal impellers 5. Vertically-mounted units 6. Without feed pump Technique parameters Model ZCQ240 ZCQ270 ZCQ300 ZCQ360 Vessel diameter 700mm 800mm 900mm 1000mm Treating capacity ≤240 m3/h ≤270 m3/h ≤300 m3/h ≤360 m3/h Vacuum pressure -0.030～-0.045MPa -0.030～-0.05
[Related Keywords : vacuum degasser, degasser, vertical degasser, drilling mud degasser]
Business Type
Supplier
Location
Hebei, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Unit
Price:
US$ 88000
Place of origin:
China
pump system to replace the traditional hydraulic and electrical system.Save 50% of electric energy, 50% of hydraulic oil, and reduce noise by more than 20dB on average.The electro-hydraulic proportional system is cancelled, and the hydraulic system is simplified, resulting in high reliability and easy maintenance.The pressure is controlled by a servo motor-pressure sensor closed-loop, and the pos
[Related Keywords : Hydraulic Press]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
501 - 1000
Annual Revenue
More than 100,000,000
Place of origin:
China
Supply Ability:
5sets/month
pump (including spray pump, rich night pump and vacuum pump water supply pump), storage tank, chiller, high-pressure fan, control system and sensors (temperature, pressure, ethylene glycol density, pH meter, liquid level sensor and EO detector), etc. Product characteristics1. The removal rate after tail gas purification reaches more than 99.9%, and the treatment effect can reach below 2 ppm, usua
[Related Keywords : ETO gas treatment, EO treatment equipment]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 18300
Place of origin:
China
control system, auxiliary equipment, and other parts. The host is the core part of the production line, responsible for the production and processing of spiral coils. The control system is responsible for controlling the operation of the production line, including adjusting parameters such as speed and pressure. Auxiliary equipment includes spiral tube vertical support material racks, spiral tube
[Related Keywords : Pipe Bending Machine, Tube Bender, Manual Pipe Bender, Pipe-Machine]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
pump/glue pipe heating function (optional);13. Vacuum control keeps thin fluids from dripping;14. Unique control system which will not influenced by air pressure factor, ensures optimal dispensing performance; 15. XYZ axis can be programmed to dispense glue along desired patterns. Application Area:1. Electrical Products: Electronic parts, integrated circuits, circuit board solder paste, fixed and
[Related Keywords : Silicone Dispensing Machine, glue potting machine, epoxy resin mixing, pu dispenser]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
pump factory , we provide industrial screw pumps, screw pump pressure, screw transfer pump, screw type dry vacuum pump, screwpumps, screw pump video, etc. For more information, please feel free to contact us! BZ is a professional drilling solids control equipment and solution provider, providing professional solutions for oil and gas drilling, waste treatment, environmental and municipal construc
[Related Keywords : Screw Pump]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
51 - 100
Annual Revenue
Less than USD 100,000
Video
Min. Order:
1
Place of origin:
United States
Price Condition:
EXW
Supply Ability:
200 units per year
pump with turbo pump for high vacuum. Not recommended! Long time and high temperature configurations are optional.Continue Reading For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely
[Related Keywords : AG Associates, Heatpulse, Rapid Thermal Process, Rapid Thermal Annealing]
Business Type
Manufacturer
Location
California, United States
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,000
Min. Order:
1 Piece
Price:
US$ 38500
Place of origin:
China
control system; An automated cost-cutting method which dramatically decreases operational and labor costs; A mold-free system, even small product series become profitable; An environmentally-friendly system; Made to Order for PU foam dispensing machine3-axis Traversing rangX: 2250mm Y: 1250mm Z: 200mmMax. sliding speed:0-4000mm/minMeter pump precision(+/-)0.1%Overall Dimensions:3650mm*2980mm*2150
[Related Keywords : pu dispesning machine, pu gasket machine, pu foam machine, foam machine]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Unit
Price:
US$ 400
Place of origin:
China
Supply Ability:
5000sets per month
Control Range ℃ 160℃ 180℃ Temp. Control Accuracy ℃ P.l.D±0.1℃ P.l.D±0.1℃ Power Supply AC3∅380V/50HZ AC3∅380V/50HZ Heat Transfer Medium Water Cooling Method Indirect Cooling Heating Power Kw 9 12 9x2 9 12 9x2 Pump Power Kw 0.75 0.75 1.5 0.5 1.1 1.1 Max. Pump Flow L/min 135 135 235 30 50 50 Max. Pump Pressure Kg/cm² 2.5 2.5 2.5 3.5 3.5 3.5 Alert Function Phase-Missing/Water Insuf
[Related Keywords : temperature controller, mold temperature control, high temperature control]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
1 Set
Price:
US$ 1000
Place of origin:
China
Pressure: 6-0.8 MPAAir Consumption:120 L/MinAvailable Material: Iron, stainless steel, copper, and other metalDimension: 800 x650 x 1500mmNet Weight: 220 KgsWarranty: Machine warranty 24 months, Cutting Blades warranty 6 monthsApplicationsCircular saw cutters are versatile tools that can work for a variety of metal cutting applications. The head of the pneumatic circular saw cutting machine can b
[Related Keywords : Pneumatic Saw cutting, saw cutting, sawing cutting]
Business Type
Manufacturer
Location
湖北, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
 |
Recommended Content
