Min. Order:
1 Set
Price:
US$ 3000 ~ 10000
Place of origin:
China
Supply Ability:
20sets/month
Test duration: continuous immersion in water, d epth specified by manufacturer, generally up to 3 m. 2. Features: ● For IPX8 waterproof testing ● The tank body is made by SUS304 stainless steel. ● Adopts Silicone seals, with feature of good elasticity, and not easy to damage. ● Equip with cylinder lifting device, stable lift to decrease the pressure during the operation. ● Equip with
[Related Keywords : IPX8 water tank, high pressure water tank, IEC60529, ipx8]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Min. Order:
1 Set
Price:
US$ 2000 ~ 10000
Place of origin:
China
Supply Ability:
20 sets/month
tests, the swing pipe can be adjusted back and forward, left and right, and the angle also can be adjusted. The hammer for 1J and below tests is made of nylon, and the hammers for IK07 to IK10 tests are made by steel, the working principle is : the sample is placed in normal, then adjust the impact points, and position the impact device, then release the hammer to freely impact the hammer. T he i
[Related Keywords : impact testing apparatus, pendulum impact apparatus, ev test machine, IEC 60068-2-75]
Business Type
Manufacturer
Location
Jiangxi, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Place of origin:
China
test speed. Different load cell connections with the sample eliminate interference typically caused by friction and gravity from pulleys and strings used in traditional testing methods. Equipped with a limiting device and automatic return function. Real-time display of the test curve and peak value recording. Supports elongation rates of 50%, 100%, and 200%. Includes an embedded micro printer. Ad
[Related Keywords : Stretch Film Tester, Tensile Tester]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Unit
Price:
US$ 6300
Place of origin:
Indonesia
Supply Ability:
10
Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instruments memory. The communic
[Related Keywords : calibration product]
Business Type
Manufacturer
Location
Jakarta, Indonesia
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Unit
Price:
US$ 6780
Place of origin:
Indonesia
Supply Ability:
10
Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instruments memory. The communic
[Related Keywords : Calibration product]
Business Type
Manufacturer
Location
Jakarta, Indonesia
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
3
Place of origin:
China
Price Condition:
FOB Tianjin
Foreword The bond strength tester is mainly used for field testing of the bond strength of the construction works, the instrument by the feed through jack, hand pump, triangular chassis, and force measurement device components, with the use of a machine, novel structure, compact, easy to operate, fully functional characteristics. Detector pump manually loaded, the drive torque is small, shaking
[Related Keywords : Multifunction Strength Tester, multifunction intensity detecto]
Business Type
Manufacturer
Location
Tianjin, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
10 Unit
Price:
US$ 255.55 ~ 355.55
Place of origin:
United States
device per clause 15.103.Enclosure protectionIEC 60529: IP40 (non-operating)SafetyIEC 61010-1Pollution Degree 2IEC 61010-2-033CAT IV 600 V/CAT III 1000 VBatteriesFour AA batteries (NEDA 15A or IEC LR6)Battery lifeMeter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 M
[Related Keywords : Insulation testers, Electrical tools, Thermal Camera, Surveying]
Business Type
Supplier
Location
Selangor, Malaysia, Malaysia
Employees Total
6 - 10
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
Sonic nozzle gas flow test device is used to test and inspect vortex flow meter,turbine and ultrasonic flow meters at wide flow range.Keep your flowmeter's measurements as accurate as their specifications. The LNQ-3000 Sonic Nozzle Gas Flow Standard Device is a gas flow standard device (negative pressure method) that utilizes a critical flow Venturi nozzle as a standard meter. This device can be
[Related Keywords : Gas Meter Testing Equipme, Flow Meter Testing]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
testing. Research on air calibration and actual gas error testing and correction for G1.6~G6 ultrasonic and thermal gas meters. The nominal volume of the piston standard device is 120 L, the maximum working pressure is 10 kPa, and the cylinder volume standard uncertainty Urel=0.05% (k=2), which meets the flow range of (0.016～10) m³/h for different media of electronic gas meters The test requir
[Related Keywords : Gas Meter Testing Equipme, Flow Meter Testing]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
device accuracy. The entire system achieves fully automated testing under PC control and incorporates comprehensive functions such as raw data storage, querying, and printing. Feature of the test bench The device uses Venturi sonic nozzles as standard instruments. The computer automatically selects the optimal nozzle combination based on the different flow points of the flow meter being tested. M
[Related Keywords : Gas Meter Test Bench, Flow Meter Testing]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
The master meter method gas flow standard device adopts four high-precision gas turbine flowmeters produced by Elster GmbH, Germany.These flowmeters serve as standard instruments for the calibration of other flowmeters. The device operates with air as the medium and employs the negative pressure method to achieve the calibration of the flow meters under test. Design basis JJG643－2003 Verificati
[Related Keywords : Gas Meter Testing Equipme, Flow Meter Testing]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
testing machine comes with a high-performance buffer and vibration isolation device, just put it on the level floor, the installation is convenient One-stop for Measurement & Analysis: various waveform tolerance bands for reference standards are built in the software, users just need to apply and start, customized test report will be generated after the test. TABLE OF KRD10 HYDRAULIC VERTICAL SH
[Related Keywords : KRD10]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
devices. The packaging compression table is mainly includes upper press plate, upper & lower limit, guiding shaft, movable crossbeam, force sensor, base etc. The table part is the transmission part of the testing equipment, which provides test space that meets the standard for the specimen. CME Technology Co., Ltd. was established in 2006, specializing in the research, development and manufacturi
[Related Keywords : drop tester]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
TEST? What is the procedure of IEC 60068-2-32? This test is divided into two procedures. The first simulates falls that a specimen, normally in the unpacked state, could undergo during handling and is normally restricted to two falls from a prescribed attitude onto a specified surface from a specified height. The second procedure simulates repeated falls that may occur to such devices as connecto
[Related Keywords : Drop Test Machine]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
US$ 10000
Place of origin:
China
Tester (Box Type) KRD31 Constant Acceleration Tester (Arm Type) KRD32 Non-standard Constant Acceleration Tester WHAT IS THE PURPOSE OF DOING CONSTANT ACCELERATION TEST? 01 It may be used as a high-stress test to determine the mechanical limits of the package Internal metallization and lead system, die or substrate attachment, and other elements of the microelectronic device. By establishing pro
[Related Keywords : Constant Acceleration Tes]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Piece
Price:
US$ 2099.99 ~ 3099.99
Place of origin:
United States
devices, for example, read manufacturer and device type, read primary variable (PV), or read current output and percent of span.Common practice commands provide functions that are common to many but not all field devices, for example read multiple variables, set damping time, or perform loop test.Device-specific commands provide functions that are unique to a particular field device, for example
[Related Keywords : Process Calibrator, Fluke, Electronic, Documenting Process]
Business Type
Supplier
Location
Kuala Lumpur, Malaysia
Employees Total
11 - 50
Annual Revenue
USD 50,000,001 - 100,000,000
Place of origin:
China
KRD51 Transportation Bounce Test System Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication devices) travel for extended periods of time and must be transported off-road. All of these items must maintain functionality upon arrival at their de
[Related Keywords : Testing Equipment, Vibration Test Equipment, vibration table, Transport Test System]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
KRD31 Constant Acceleration Tester (Arm Type) KRD31 series constant acceleration tester is used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7. It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It
[Related Keywords : Centrifugal Tester, centrifuge, Constant Acceleration, balancing test]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Supply Ability:
1000/ year
test system: It can realize multi-level acceleration continuous test according to the different requirements of the test sample. l Reliable protection measures: open circuit, over-limit and over-speed protection can be realized. l Multiple control methods: In the case of automatic control failure or no need of automatic control, the device can still use manual control to complete the test. l C
[Related Keywords : Centrifugal tester, Constant Acceleration, centrifuge, balancing test]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
Supply Ability:
1000/year
device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small. Technical Specifications Model Parameters KRD13 － 50 KRD13 － 100 KRD13 － 200 KRD13 － 500 KRD13 － 800 KRD13 － 1000 KRD13-2000 Rated Load (kg) 50 100 200 500 800 1000 2000 Table Size (mm) 500×500 600×600 800×800 1000×1000 1200×1200 1500×1500 2000×2000 Peak Acc. (g) Half-Sine 1
[Related Keywords : Shock Test Machine, shock Testing, shock test system, shock test equipment]
Business Type
Manufacturer
Location
Shanxii, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Competitive testing device products from various testing device manufacturers and testing device suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
