Chilled Casting Wholesale

Enhanced High Chrome Cast Iron Rolls (HiCr Cast Roll for Hot Rolling Strip Mill)

• Place of origin:  

  China

• Supply Ability:  

  20000tons/year

casting or centrifugal casting, our products have excellent performance. 7 Horizontal Spin Casters (Centrifugal Machines)1 Unit Ø 1.600 mm x 4.500 mm B.L.1 Unit Ø 1.400 mm x 3.000 mm B.L.2 Units Ø 800 mm x 2.600 mm B.L.1 Unit Ø 500 mm2 Units Ø 300 mmPlus a complete set of chills, chillers and moulding tackle to cast all kind of rolls including big section rolls with the barrel shaped with gr

[Related Keywords : high chrome rolls, hicr rolls, cast rolls for mills, cast rolls]

Sizing Roll

• Min. Order:  

  1 Pair

• Price:  

  US$ 100

• Place of origin:  

  China

• Supply Ability:  

  200set/Month

Diameter Range of roller: Φ230mm~900mm Material of roller: pearlitic nodular cast iron； Acicular nodular cast iron; Chill Casting Iron, Hi-Ni, Cr content Indefinite Chill Casting Iron Making Method: Medium frequency electric furnace smelting - Centrifugal composite or satic casting Hardness: HSD55-75

[Related Keywords : Sizing mill, Roll, roller, Tube roll]

XK-450 Two Roll Rubber Open Mixing Mill Machine

• Min. Order:  

  1

• Price:  

  USD 27700

• Place of origin:  

  China

• Price Condition:  

  FOB DALIAN

• Supply Ability:  

  10 sets per month

Application: Rubber mixing mill is mainly used for mixing and plasticating of rubber, also used for sheeting. The rubber mixing mill's rollers are made of chilled alloy cast iron,Roller surface layer hardness can reach 70±2HSD,Depth of chilled layer is 8~22mm Roller bearing and oil seal use the spherical roller bearing,can save 10-15% energy and the material of oil seal is FPM. The

[Related Keywords : Rubber mill, Two roll mill, Open mill, Rubber mixing mill]

Silicon Barium Calcium Inoculant Si Ba Ca

• Min. Order:  

  20 Metric Ton

• Price:  

  US$ 1000 ~ 1500

• Place of origin:  

  China

• Supply Ability:  

  1000 MT/ Month

castings, increase the intensity, for ductile iron parts, it can make the graphite in ductile iron ball small, round, improve the nodulizing grade. 2.Effectively reduce molten iron super-cooling degree, promote the precipitation of graphite, significantly reduce chilling tendency, reduce the relative hardness, improve casting machinability. 3.Easy to dissolve and absorb than the average inocula

[Related Keywords : Silicon Barium Calcium, Inoculant, Si Ba Ca, SiBaCa]

Calcium Silicon Alloy 6030 5528 in the Size 10-100mm for Steelmaking

• Min. Order:  

  10 Ton

• Price:  

  US$ 1329 ~ 1350

• Place of origin:  

  China

• Supply Ability:  

  5000T per month

cast iron production, the calcium silicon alloy has an inoculation effect. helping to form fine-grained or spheroidal graphite; 4. In grey cast iron Graphite distribution uniformity, reduce chilling tendency and can increase silicon, desulfurization, and improve the quality of cast iron. Packing and Shipping: Packaging Details: water-proof plastic woven bag, 1000kg per bag or as your requirement

[Related Keywords : calcium silicon, calcium silicon alloy, calcium silicon 6030]

Electroplated Diamond Grinding Wheel for Non-ferrous Industry Application Miya AT Moresuperhard .Com

• Min. Order:  

  1 Piece

• Price:  

  US$ 95~100

• Place of origin:  

  China

• Supply Ability:  

  5000pcs/mth

Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious

[Related Keywords : Electroplated, Diamond Grinding Wheel, for Non-ferrous Industry, grinding wheel]

EVA Foam Press

• Place of origin:  

  China

EVA foam press is widely used for fast foamed slippers, and materials for shoes and other rubber and plastic products. The structure of the main machine is made from cast steel. The plunger is made from chilled cast iron with surface hardness, HR-70. The rising speed is 10 seconds and the falling speed is 2 seconds. The product has the superiority of less temperature difference, reliable insulati

[Related Keywords : rubber machine, banbury intensive kneader, rubber machinery, rubber mixing mill]

Two-roller Mixing Mill A Type

• Place of origin:  

  China

• Price Condition:  

  FOB

Product Description Applivations: The machine is used for plasticating ,nixing and sheating of plastics and rubbers Features: 1 The rolls are made of chilled alloy cast iron with wear-resistant hard surface .The cavities of rolls are machined. 2 Overload protection device is provided to protect the main parts from damage due to overload. 3 The reverse current plugging system is provided above the

[Related Keywords : rubber machine, rubber mixing mill]

Cardiology Stainless Steel Stethoscope

Cardiology Stainless Steel Stethoscope ●The cast stainless steel chestpiece for both 1-3/4 inch DIA. diaphragm and 1-1/4 inch DIA. deep cone-shaped bell for excellent acoustic sensitivity. ●Stainless steel binaural tube with a reinforce dual inner-spring construction provides extra durability, while still maintaining portability ●Special 2 in 1 thick-walled PVC tubing for outst

[Related Keywords : stethoscope]

Shipyard Machinerys

• Place of origin:  

  Korea

Warning Full hydraulic force Proportion Control Servo Control Right And Left Balance Vertical Roll Bender PLC Function Proportion Control system Provided adjustable bending center Ram Traveling Press Hinge Typed 360 Rotatating Angle Enhanced durability : Designed to be the essentric load self-adjusted according to each pressure point. Scratch resistant with chilled cast ram.

[Related Keywords : Shipyard Machinerys, machinery]

CNC EDM Hole Drilling Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 10000 ~ 200000

• Place of origin:  

  China

KD-DC430A(B,C) CNC EDM Drillig Machine X×Y=400×300mm KD-DC435A(B, C) CNC EDM Small Hole Drilling Machine X×Y=450×350mm KD-DC640A(B, C) CNC EDM Small Hole Drilling EDM Machine X×Y=600×400mm KD-DC850C CNC EDM Small Hole EDM Machine X×Y=800×500mm - With Casting Body KD-DC1063C CNC EDM Small Hole EDM Machine X×Y=1000×630mm - With Casting Body KD-DC1080C CNC EDM Small Hole EDM Machine X×Y

[Related Keywords : cnc edm drill machine]

Three Roll Mill SH150 SZ65 ST150 SYP400

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

Three roll mill We can customize the three roll mills with different rolls (stainless steel, bearing steel, granite, ceramic, alloy chilled cast iron etc.) and different size of rolls (65,125,150,200,305,400mm etc.) . Use: three roll mill is used for grinding and dispersing the highly viscous liquid and paste such as paint, ink, pigment, plastic, cosmetic, soap, ceramic, rubber and so on. 1. T

[Related Keywords : gringding mill, rubber machinery, rubber equipent, rubber]

AZ91D AZ80A ZK60A Magnesium Alloy Billet Rod Bar Plate Tube Wire Disc Cube Block Strip Ribbon Az61a

• Min. Order:  

  1 Kilogram

• Price:  

  US$ 5 ~ 50

• Place of origin:  

  China

• Supply Ability:  

  500tonne per month

casting, magnesium alloy forging and semi - fabricated component according to customer’s design. We comply with the specifications: GB5153-03, GB5154-04, AMS4377G, ASTM B90/B90M-15, MIL-DTL 32333, MIL-T-38749, QQ-M-44B, ASTM B107/B107M-13 and ASTM B91-97 Material grades: AZ31B, AZ61A, AZ80A, AZ91D, AZ41M, ZK60, AM50, AM60, ZM21, MIA, ME20M, EQ21, WE43, WE54, ZE41, etc. Our main products and c

[Related Keywords : magnesium alloy rod, magnesium alloy billet, magnesium alloy bar, magnesium alloy wire]

High-performance Tungsten Carbide Tool Parts

• Min. Order:  

  10

• Price:  

  USD 450

• Place of origin:  

  China

• Price Condition:  

  FOB any port in china

• Supply Ability:  

  10000 KG per month

chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. YG6A K10 14.7-15.1 ≥1580 ≥91.0 YG6 K20 14.7-15.1 ≥1670 ≥89.5 Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electri

[Related Keywords : tungsten carbide, carbide parts, oil parts]

OEM Tungsten Carbide Products

• Min. Order:  

  1 Kilogram

• Price:  

  US$ 50

• Place of origin:  

  China

• Supply Ability:  

  10ton/month

chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.YG6AK1014.7-15.1≥1580≥91.0YG6K2014.7-15.1≥1670≥89.5Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geo

[Related Keywords : tungsten carbide, OEM, cemented carbide]