Buy Now

Sell Now

My EC21

Search Advanced Search

Products > 2 layers > Shaanxi Ansen Medical Technology Development Co., Ltd | Similar Products

Your search for "

2 layers

" found 8 Products from Shaanxi Ansen Medical Technology Development Co., Ltd, China

Inquire Now

(1-8 out of 8)

Free Sample Industrial Amor Wrap Fiberglass Sheath Repair Tape Used in Mining Industry: 2. Put on enclosed latex gloves 3. Put water into the packing bag, press sveral seconds and take out the tape. Squeeze out excess water. 4. Apply around the cable extending up to 50mm either side of ...

Protect Insulation Armorcast Bulk 15 Fiberglass Armor Wrap for Cable Sheath Repair: either side of the cable to ensure complete coverage. The armorcast tape must be applied quickly as curing starts once it is taken out of the water.* While wrapping, pull each layer tightly and ...

Mechanical Protection Bandage Cable Fix Tape Armor Wrap Bandage: layer tightly and firmly. * For best results, smooth and rub the surface to achieve good contact between layers. * Please do not open the bag before you use it. * Clean the damaged area thoroughly, ...

Fix Breakage Fiberglass Tape Leaky in 30 Minutes Resist 50 Bar Wrap Seal Pipe Repair Bandage: 20 – 30 minutes, sets under water v Chemical resistance: Most diluted chemicals and fuels ♦ Useable life: …2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 ...

Fast Repair Wrap Tape Emergency Pipe Repair Tape: 2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 minutes ♦ Full cure time: … 30minutes ♦ Shore D hardness: … 70 ♦ Tensile strength: … 30-35Mpa ♦ Tensile modulus: … ...

High Quality Armored Wrap Tape for Industry Pipe Repair and Cable Connection: 20 – 30 minutes, sets under water v Chemical resistance: Most diluted chemicals and fuels ♦ Useable life: …2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 ...

Industry Emergency Pipe Repair Bandage/ Pipe Wrapping Tape/ Armored Cast Tape Bandage: 2. Prepare the surface by cleaning and roughening the pipe. 3. Put on enclosed latex gloves. 4. Apply Steel Putty to the leak site and mould. 5. Open foil pouch and immerse bandage in temperate ...

Water-activated Pipe Repair Bandage: 20 – 30 minutes, sets under water v Chemical resistance: Most diluted chemicals and fuels ♦ Useable life: …2-3 minutes, depending on temperature of water and pipework ♦ Intial cure time: … 5 ...

Page 1 of 11

Go to Page Go