Min. Order:
500 Kilogram
Price:
US$ 64000 ~ 73000
Place of origin:
China
Supply Ability:
230 tons monthly
curing agent for the rubber of low unsaturation value especially IIR and EPDM. OF-1055 resin easily disperses and operates, giving faster sulfurizing speed, no need of activator, simple composition, and good scorch safety. OF-1055 resin is used for bladders, bottle stopper, seals, heat-resistant gasket, roll, pressure sensitive adhesives. The recommended dosage is 1.5~8 phr. Certification: REACH
[Related Keywords : rubber curing agent, SP-1055, rubber additives, brominated phenolic resin]
Business Type
Manufacturer
Location
Shanxi, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Kilogram
Price:
US$ 6.8
Place of origin:
China
Supply Ability:
500000tone
Silicone Peroxide Curing Agent, Chemical Name DHBP, Model Name C-16 Products Description:C-16 is a kind of peroxide system curing agent, the cured silicone by this agent are characterized non-toxic and good anti-yellowing performance. Silicone raw material should be cured at high temperature. Note: This agent is inflammable and volatile. Please watch out during work time. Composition: 1、Anti-
[Related Keywords : Peroxide Curing Agent, silicone curing agent, vulcanizing agent, sulfurizing agent]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Supply Ability:
10MT/Month
curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures. The curing system Butanox® M-50/cobalt accelerator is particularly suitable for the curing of gelcoat resins, laminating resins, lacquers and castings; moreover the manufacture of light resistant parts may be possible contrary to the curing system benzoyl peroxide/amine accelerator.
[Related Keywords : MEKP, M-50, Curing Agent, Nouryon]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Ton
Price:
US$ 2200
Place of origin:
China
curing reaction resin curing I through condensation,closed-loop, addition or catalysis and other chemical reactions so that thermosetting resin irreversible change process. Curing is completed by adding curing (cross-linking) agent. The curing agent is an essential additive, whether as an adhesive, or coating. Castable needs to add a curing agent, otherwise, the epoxy resin can not be cured. The
[Related Keywords : resin curing agent]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1000 Kilogram
Price:
US$ 1.3 ~ 2.5
Place of origin:
China
Supply Ability:
10000 tons
range of amine value is 345~365 mgKOH/g.Packing: This product is in yellow lucent thick liquid from, packaged in steel drums, 180kg net.Storage:ET 140 should be kept in tightly closed containers in a cool, dry place. Under these conditions, our products are durable for least 1 year.Related Product:Versamid 140; Uni-Rez 2140; Crayamid 140; Aradur 140; Epi-Cure 3140; Sunmide 328A; Domide G-640
[Related Keywords : polyamide resin, reactive polyamide, epoxy hardener, polyamide curing agent]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Min. Order:
0.5 Ton
Price:
US$ 5.2
Place of origin:
China
Supply Ability:
200 T/ month
HIGH ANTI-CORROSIVE PHENOLIC CURING AGENT High anti-corrosive curing agent for epoxy resin is a kind of thermosetting linear phenol modified curing agent which can be used with Bisphenol-A epoxy resin or phenolic modified epoxy resin and owns good miscibility. MAIN PERFORMANCE: 1、High active reaction. 2、Good chemical resistance of film. 3、Solvent resistance. 4、Fast curing. 5、Good adhesi
[Related Keywords : curing agent, powder coating, matting agent]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Min. Order:
1 Kilogram
Price:
US$ 10 ~ 15
Place of origin:
China
Supply Ability:
5000ton
Model NO. Model NO.T9AppearanceLiquidColourColorlessTransport Package25kg/DrumTypePU CatalystQualityIndustrialProduct DescriptionBRAND NAME: T9 MOLECULAR FORMULAR: (C8H15O2)2SnMOLECULAR WEIGHT: 405.1APPEARANCE: Light yellow transparent viscous oily liquid Total stannum content: ≥28.0Stannous content: ≥26.5%Viscosity at 25ºC: 250-500CPSRefraction at 20ºC: 1.491±0.008SPECIFIC GRAVITY: 1.25±
[Related Keywords : T-9, Stannous Octoate, Organic-Metal Salt, Metal Carboxylate]
Business Type
Supplier
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Characteristics This binder system doesn’t contain harmful foundry elements: Nitrogen, Sulfur, Phosphorus, etc., which is especially suitable for the production of steel alloys, carbon steel and ductile iron casting. The binder system has second curing under high temperature and good thermo plasticity, which can reduce hot crack, veining, defect of steel and ductile iron casting, as well as i
[Related Keywords : organic ester, curing agent, phenolic resin, casting material]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
501 - 1000
Annual Revenue
USD 100,000 - 500,000
Polyisocyanates packed in aluminum bottles for curing various kinds of adhesives.
[Related Keywords : Isocyanate, curing agent]
Business Type
Supplier
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
cured with carboxylic polyester,the acid ＆#118alue ranges from 25-45mgkoH/g,it can be combined with Slip and degassing agent RB500 in Pure polyester powder system. 3. 3. A study on purification technology of RB301 by science,make RB301 has a high purity and color white, the dosage of RB301 is at about 5-6% of resin weight(or according to the equal weight to confirm the optimum dose) 4. RB301 ha
[Related Keywords : HAA curing agent RB301, curing agent]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Metric Ton
Price:
US$ 8000 ~ 9000
Place of origin:
China
Supply Ability:
10T/per month
Description: ETHYL 2-CYANOACRYLATE is an α-cyanoacrylate adhesive. α-Cyanoacrylate adhesives are characterized by fast curing, wide material bonding compatibility, thin adhesive layer, good transparency, and ease of use. It is a transparent, colorless to pale yellow liquid, soluble in acetylene (a small amount), benzene (a small amount), and chloroform (a small amount). Applications: 1. Adhesiv
[Related Keywords : CAS 7085-85-0, ETHYL 2-CYANOACRYLATE, GMP, Purity Degree 99%]
Business Type
Supplier
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
Korea
cured product is -70°C or less. It has excellent electrical properties: It has electrical insulation and dielectric properties, and has less temperature dependence, hygroscopicity, and hygroscopicity A wide range of physical properties can be adjusted: Applicable in a variety of ways from soft to hard types Applications Waterproofing agents, adhesives, electrical insulation, automatic dust remov
[Related Keywords : polybutadiene]
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Min. Order:
1 Pallet
Price:
€ 1000
Place of origin:
Denmark
agents. Where to use Exterior and interior on boats above the waterline, when a glossy, solid, and waterproof surface is required. Also suitable for indoor use on e.g., skirting boards, panels, railings etc. Odor Strong. Odorless after drying. Coverage App. 10-14 m2/L, depending on the substrate. Drying time -Touch dry: 2 hours -Recoatable: 6 hours -Fully cured: app. 48 hours (measured at 23°C a
[Related Keywords : wood coatings]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
24 Metric Ton
Price:
US$ 850 ~ 1500
Place of origin:
South Africa
Supply Ability:
4500 per month
Product Description Polyamide Resin is an polyamidoamine epoxy curing agent, it is usually cured at room temperature with epoxy resins, it is used in composites and adhesives, as well as building repairs.The hardener has long pot life, good adhesion, good chemical resistance, and other goodcomprehensive properties when used with epoxy resin. Product Parameters Performance: Long pot lifeHigh hard
[Related Keywords : Polyamide Epoxy Hardener]
Business Type
Supplier
Location
Bloemfontein, South Africa
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Min. Order:
1000 Kilogram
Price:
US$ 4.8
Place of origin:
China
Introduction It is a kind of white flowing powder organosilicon hydrophobic agent, this product contains special active substances can be quickly dispersed and dissolved in contact with water, and cement and other cementitious materials to react and combine to form a highly active silane hydrophobic groups, with superior hydrophobicity, greatly reducing the water absorption rate, preventing water
[Related Keywords : Silicone Hydrophobic, Hydrophobic Powder]
Business Type
Manufacturer
Location
Henan, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
China
Supply Ability:
9000kg per day
curing agent or catalyst . Pls follow the step strictly: 1.Weigh the two part exactly by electronic weight..If not , for example add two much catalyst , the operation time will be too fast to operate ,which will cause inconvinience to operate . 2.Mix part A and part B evenly.Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. Wh
[Related Keywords : Platinum Based Silicone, RTV2 Statue Mold, silicone Chocolate mold, silicone Candle mold]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
5 Ton
Price:
US$ 500
Place of origin:
China
curing condition and natural maintenance. 5,No corrosion on steel bars. It is applicable for precast concrete, cast-in-place concrete, reinforced concrete, prestressed reinforced concrete, etc. in various projects. 6,Good compatibility with portland cement, regular portland cement, portland slag cement, portland flyash cement, etc.FDN-05 has good compatibility with portland cement, regular portla
[Related Keywords : Concrete Admixture, FDN, SNF, Construction Chemicals]
Business Type
Supplier
Location
Shandong, China
Employees Total
11 - 50
Annual Revenue
USD 100,000 - 500,000
Place of origin:
China
Product name: 2-Mercaptoethanol CAS# 60-24-2 Item Specification Appearance Colorless transparent liquid Purity 99.5% min Color 10 max pH 3 max Application: 1. chain transfer agent in polycarboxylate superplasticizer PCE. 2. curing agent. 3. high refractive index optical resins. 4. oil pipeline fungicide. Package: 220kg/drum or 1100kg/IBC drum Lead time: Prompt shipment Please contact me freely if
[Related Keywords : 2-Mercaptoethanol, CAS 60-24-2]
Business Type
Supplier
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
5 Kilogram
Price:
US$ 350~400
Place of origin:
China
bleaching effect, and can be used in light-solidification system initiated by visible light. It is mainly used in high-tech and high value-added fields, such as argon laser scanning curing, holographic laser imagery, polyimide photocuring, PCB printing ink, PCB anti-corrosion agent. It also can be used in photoresist, photopolymerization forme, and composite material. Cas No.: 125051-32-3
[Related Keywords : photoinitiator, ECure 784]
Business Type
Supplier
Location
Tianjin, China
Employees Total
6 - 10
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
Vulcanizing Agent Introducing our Vulcanizing Agent, a product that aids in the efficient curing of rubber compounds. This agent is known for its ability to promote uniform curing, which is vital for achieving high-quality rubber products. It is suitable for a variety of rubber types and can be easily incorporated into existing production processes. The use of our Vulcanizing Agent can lead to r
[Related Keywords : Vulcanizing Agent]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
101 - 500
Annual Revenue
USD 100,000 - 500,000
Competitive curing agent products from various curing agent manufacturers and curing agent suppliers are listed above, please select quality and cheap items for you.
Besides, we also provide you with related products such as hardener, stearic acid, plastic heat stabilizer, adhesive, resin, chemical, moca, epoxy resin, crosslinking agent, wetting agent, textile softener, glue, chemical reagent, binder, tgic, taic, polyurethane, elasticity, crosslingking agent and chloroaniline for your choice.
 |
Recommended Content
