Min. Order:
50 Unit
Price:
US$ 100
Place of origin:
China
Supply Ability:
100000
The drilling tools are widely applicable to boring and drilling in the industries of stone-quarrying, mineral-quarrying, water conservancy, transport, military industry, geology and civil engineering, ect.
[Related Keywords : DTH bits, button bit, bit, dth]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Video
Place of origin:
China
[Related Keywords : DTH Drill Bit, WaterWell Drill, Down the Hole Bit, DTH Bit]
Business Type
Manufacturer
Location
河南, China
Employees Total
51 - 100
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Piece
Price:
US$ 1 ~ 500
Place of origin:
China
Supply Ability:
2000pcs per month
down slips to provide an anchoring point for the tieback or workstring during stimulation operations. These tubing anchors are the most economical and effective insurance you can buy against premature repairs and downtime. 2.Technical and Specification Model Length (mm) Max OD (mm) Min ID (mm) Pressure(MPa) Max OD when teeth open Setting Pressure (MPa) Connecting Thread Casing ID to be used 5
[Related Keywords : tubing anchor for oilfeld, tubing anchor catcher, oil well tubing anchor]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 99
Place of origin:
China
Supply Ability:
10000 set per month
Kimdrill DTH bits (down the hole button bits) are hot pressed and undergo a combination of heat treatments, thus guaranteeing the good quality and longevity. The diameters range from 60mm to 700mm. The shanks can be Cop series, like COP32, COP34, cop44, cop54, cop64, cop84. DHD series, like DHD3.5, DHD350, DHD340, DHD360, DHD380. QL series, like QL40, QL60. QL80. SD series, SD4, SD5, SD6, SD8, CI
[Related Keywords : Dth Bits, DTH hammer, Foundation Engineering, down the hole bits]
Business Type
Supplier
Location
Hunan, China
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
5 Piece
Price:
US$ 95
Place of origin:
China
Supply Ability:
100,000 pieces per year
Product description：DTH bit, usually called down the hole bit, a piston of DTH hammer powered by compressed air gives the DTH drill bit striking power to break hard rock into small particles. In DTH drilling, the percussive DTH hammer is located behind the drill bit, inside the hammer, a piston powered by compressed air gives the DTH drill bit its striking power, while the DTH hammer casing giv
[Related Keywords : dth bits, dth drill bits, dth button bits, downhole drill bits]
Business Type
Manufacturer
Location
Guizhou, China
Employees Total
51 - 100
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
1 Set
Price:
USD 6500
Place of origin:
China
Supply Ability:
20 Set/Month
DTH Down the Hole Drill Equipment diamond wire, wire saw machine, wire saw, wire cutting, multiwire cutting machine, multi-wire cutting machine, multi wire sawing, concrete cutting, diamond wire saw, block cutting, diamond wire sawing Multifunctional drill machine is mainly used for primary and secondary cutting in all quarries to make the hole for diamond wire. Available for vertical, horizontal
[Related Keywords : dth machine, down the hole drill, diamond wire saw, pneumatic dth drill machine]
Business Type
Supplier
Location
Quanzhou,Fujian, Hong Kong
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Piece
Price:
US$ 99
Place of origin:
China
Supply Ability:
10000 pcs per month
DTH bits (down the hole button bits) are hot pressed and undergo a combination of heat treatments, thus guaranteeing the good quality and longevity. The diameters range from 60mm to 700mm. The shanks can be Cop series, like COP32, COP34, cop44, cop54, cop64, cop84. DHD series, like DHD3.5, DHD350, DHD340, DHD360, DHD380. QL series, like QL40, QL60. QL80. SD series, SD4, SD5, SD6, SD8, CIR series,
[Related Keywords : Down the Hole, Drilling Tools, DTH Bits, drilling bits]
Business Type
Manufacturer
Location
Hunan, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
Korea
Price Condition:
FOB
Down the Hole Hammer, Bits Rock Tools spare parts for many models of drilling rigs and drifters
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
1 - 5
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
of concrete, brick, block, stone, all types of masonry material. Floor Grinding Wheel Diameter ItemNo. Arbor Seg.Number 10”(254mm) CWF254 19mm 10/20 12”(305mm) CWF305 19mm 12/24 Features: two sets of separate bolt holes patterns making the wheel easily mounted on a majority of floor grinder. Fast grinding down uneven surface of concrete, natural stone, asphalt, granite and floor coatings.
[Related Keywords : Grinding Cup Wheel]
Business Type
Supplier
Location
Jiangsu, China
Employees Total
11 - 50
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
Korea
hole is at the top of the spring to distribute the load transferred from the level bolt and the anti-frictioner is attached between upper and bottom housings, which somewhat reduces attenuation and friction caused by left-right and top- down relative displacement when the equipment is running. There is a CR pad attached on the bottom of the bottom housing to compensate disadvantages of the spring
[Related Keywords : vibration control]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
1 - 5
Annual Revenue
USD 100,000 - 500,000
Video
Min. Order:
1 Unit
Price:
US$ 12660
Place of origin:
China
hole, keeping it clear for continued drilling. In summary, the SUNMOY HG300D drilling rig provides a powerful hydraulic system that generates a downward force and rotational force to the drill bit, enabling it to penetrate through rock and other hard materials. With its high rotational speed, the HG300D is capable of drilling through even the toughest geological formations, making it a versatile
[Related Keywords : Water Drilling Rig, HG300D-300, Sunmoy]
Business Type
Manufacturer
Location
Zhejiang, China
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Place of origin:
Korea
< AWY MINIPIN HOMECARE MTS > The new home microneedle automatic device (DIY microneedle), the minipin is an “all-in-one” device. The skin pain felt during MTS (micro needling) was relieved through the patented ‘Ampoule On’. Also, when the user puts cosmetics in the tip cartridge and uses the MINI PIN, the cosmetics flow out according to the up and down movement of the needle. Because of
[Related Keywords : microneedling, MTS, Dermapen]
Business Type
Supplier
Location
Seoul, Korea
Employees Total
6 - 10
Annual Revenue
USD 2,000,001 - 5,000,000
Video
Min. Order:
200 Set
Price:
US$ 55
Place of origin:
Korea
Supply Ability:
10,000 SET PER MONTH
Introduction of TTC Urethane buffer TTC Cushion Buffer is the product which is classified as automobile spare parts and accessory. Our product is installed on coil spring in automobile’s suspension and supports suspension to enhance driving comfort and safety. It is made with our 20 years’ experience and technology. (NEW TECHNOLOGY) The new technology of TTC, 8~9 oval holes on the surface o
[Related Keywords : COIL SPRING, SUSPENSION, COMFORTABLE DRIVING]
Business Type
Manufacturer
Location
Gyeongsangnam-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
100 Box
Price:
US$ 95
Place of origin:
Korea
down. If your pelvis is twisted, even though you lose weight you will not have a well proportioned figure. Ladies! Keep your body at an 85-dgree angle. The female pelvis widens at an angle of 85 degrees. This is the correct angle for women. When you maintain this angle, it can help in balancing your weight evenly thereby maintaining correct physique. This can also help to make the organs which ar
[Related Keywords : pelvis, diet, body line, body corrector]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Video
Place of origin:
Korea
GINOVO Sloped Putting Mat (Model : GM930FGN) Features Designing Various Paths Uphill Slice&Hook, Downhill Slice&Hook The inclined plates are on both sides 31 paths for the purpose of putting guidance If the putting ball is hit with a force exceeding 50cm, it will miss the hole cup With six hole cups to aim for, a return rail is not necessary It has a built-in slope, but the putting mat can be fol
[Related Keywords : putting mat, smart golf, curling mat]
Business Type
Manufacturer
Location
Gwangju, Korea
Employees Total
11 - 50
Annual Revenue
USD 1,000,001 - 2,000,000
Place of origin:
China
holes or use self tapping screws. Once the channel is installed and you drape the polyethylene film over your greenhouse, you just need to stretch the poly film and “wiggle” the wire up and down to lock the greenhouse plastic in the U or C type Channel. If you need to re-stretch the polyethylene film for any reason, it is also super easy to remove. To remove the wiggle wires just “wiggle”
[Related Keywords : Wiggle Wire, Aluminum Wiggle Wire]
Business Type
Manufacturer
Location
Beijing, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1000 Piece
Price:
US$ 9
Place of origin:
China
Down Bolts. Tie plate are typically installed with a layer of grout cast beneath, which fills the void between the tie plate and the concrete foundation. The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvani
[Related Keywords : Forging Iron Tie Plate, Forging Iron Base Plate, Forging Iron Bearing Plat, rail tie plate]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1000 Set
Price:
US$ 17
Place of origin:
China
holes, make it sends out a smell. 3. After use, or monthly clean, must first to counterclockwise will spin out the mosquito net box, box of leaf fan automatically shut down, lock live mosquitoes. Unplug the power again. 4. (1-2 months) on a regular basis with a toothbrush when clearing mosquito net box and use ram fan blowing dust removal. Other precautions: 1. Make sure punch holes on attractan
[Related Keywords : mosquito zapper indoor, MRS Mosquito trap]
Business Type
Supplier
Location
Guangdong, China
Employees Total
11 - 50
Annual Revenue
Less than USD 100,000
Min. Order:
1 Piece
Price:
US$ 30
Place of origin:
China
water wells, foundation construction, slope support and other scenes, using pneumatic, through air conduction to the drill pipe, drill pipe conduction to the impactor, the impactor impacts the piston under the action of air, and the piston drives the drill bit, thus achieving the purpose of drilling. Length: 1005mm Weight:40kgs Thread:API 2 3/8” reg Out Diameter:99mm Hole range:110-135mm
[Related Keywords : DTH hammer, DTH tools, down the hole tools, dth hammer bits]
Business Type
Manufacturer
Location
Guizhou, China
Employees Total
51 - 100
Annual Revenue
USD 5,000,001 - 10,000,000
Place of origin:
Turkey
Full automatic mincing machine appropriate for mincing fresh and semi-frozen meat down to temperatures lower than -12ºC, depending on the diameter of the holes in the output plate. They are also apt for other types of products, such as fish, vegetables, etc. The productions achieved make them suitable for middle and high-level manufacturing, reaching productions of up to 8000 kg/hour. Sturdily
[Related Keywords : commercial meat mincer, automatic meat mince, meat slicer, meat mixer]
Business Type
Manufacturer
Location
marmara, Turkey
Employees Total
51 - 100
Annual Revenue
USD 1,000,001 - 2,000,000
Competitive down hole products from various down hole manufacturers and down hole suppliers are listed above, please select quality and cheap items for you.
 |
Recommended Content
