Epdm Cap Wholesale

55 Gallon Gold Plastic Drum Faucet 2" Lever Action Polyethylene Barrel Tap

• Min. Order:  

  50 Piece

• Price:  

  US$ 3.15

• Place of origin:  

  China

2" Polyethylene Barrel Tap / Lever Type Drum Faucet With EPDM Gaskets 1), 2" BSP Barrel Tap + 2" BSP Female to DIN61 Male IBC Adapter 2), 2" BSP Barrel Tap + 2" BSP Female to 63mm Male IBC Adapter 3), 2" BSP Barrel Tap + 2" BSP Female to DIN71 Male IBC Adapter 4), 2" BSP Barrel Tap + 2" BSP Female to DIN51 Female IBC Adapter 5), 2" BSP Barrel Tap + 2" BSP Female to 59mm Female IBC Adapter 6), 2"

[Related Keywords : Polyethylene Drum Tap, Polyethylene Drum Faucet, PE Barrel Faucet, Polyethylene Barrel Tap]

Double Orifice Air Release Valve Air Relief Valve

• Min. Order:  

  50 Set

• Price:  

  US$ 61.71

• Place of origin:  

  China

• Supply Ability:  

  60,000 Set/ Sets per Month

AIR RELEASE VALVE No. part name material standards No. part name material standards 1 body ductile iron EN1563-GJS-450 bs2789 12 O-ring EPDM EN681-1 BS2494 2 float guide ABS 13 side body ductile iron 3 float ABS 14 CAP Nylon/brass 4 support ABS 15 gasket EPDM EN681-1 BS2494 5 Seat ring EPDM EN681-1 BS2494 16 bracket Nylon 6 seat support ABS 17 Adjusting screw stainless steel EN ISO15481 BS4174 7

[Related Keywords : air valve, air release valve, air relief valve, sewer water air valve]

High Temperature Resistance Silicone Rubber End Cap Plugs for Sealing E-coating

• Min. Order:  

  50 Piece

• Price:  

  US$ 0.14~0.39

• Place of origin:  

  United States

EPDM rubber caps and plugs are good for temperatures up to 300°F(149°C) and silicone rubber caps and plugs perform in high temperatures exceeding 600°F(316°C) . Both EPDM and silicone are reusable in most processes. Most protective caps and plugs.MOCAP also produces full lines of high temperature Polyester and Polyimide tapes and discs and silicone rubber tubing .From Painting to Powder Coati

[Related Keywords : rubber plug, silicone end cap, EPDM plug, masking plug]

Battery Rubber Vent Cap

• Place of origin:  

  China

Battery Rubber Vant Cap / Battery Rubber EPDM Vent Seals Feature Our battery rubber vent caps' raw material are blended reasonably and tested according to designated procedures, they will be made by good equipment and high-new technology, with each performance index fully satisfying the requirements for various batteries. Due to adding the enhancing ring over edge of the vent cap, the streng

[Related Keywords : battery rubber cap]

15KV 200A Loadbreak Elbow Connector

• Place of origin:  

  China

EPDM rubber. Standard features include a coppertop connector, tin-plated copper loadbreak probe with an ablative arc-follower tip and stainless steel reinforced pulling-eye. An optional capacitive test point, made of corrosion resistant plastic, is available for use with fault indicators. Ordering InformationThe 15KV 200A Loadbreak Elbow Connector are packaged in a heavy duty polyethylene bag Eac

[Related Keywords : Elbow Connector]

Pan Check Valve(Screwed End)

Specification Model PAS 22 Nominal Size 25mm(1")~50mm(2") Working Press 20Bar Test Press 30Bar Connection Screwed End Material 1. Body Stainless Steel 2. Cap Stainless Steel 3. Cone Disc Stainless Steel 4. Spring Stainless Steel 5. Disc Rubber EPDM/Viton 6. O-Ring NBR/Viton Soft Seal EPDM(E) -10°C ~ +130°C Viton(V) -20°C ~ +150°C Dimension Size mm(inch) D (mm) L (mm) Wt. (kg

[Related Keywords : pan check valve]

Pleated Filter

Cap Option Length O-ring Material Special Option 'IX' lxtus 'P' : Pleated IPH:High particle holding PP grade IPP : High performance PP grade IPC : High clean PP grade 02:0.2㎛ 03:0.3㎛ 04:0.45㎛ 06:0.6㎛ 12:1.2㎛ 25:2.5㎛ 45:4.5㎛ 50:5.0㎛ 60:6.0㎛ 11:10.0㎛ 22:20.0㎛ 33:30.0㎛ 44:40.0㎛ 55:50.0㎛ 77:70.0&#

[Related Keywords : Pleated Filter, Liquid Filtering, Purifying, Micro filter]

TR414 Snap- in Tubeless Tyre/Tire Valve

• Place of origin:  

  China

 TR414 snap- In tubeless tyre/tire valve for Passenger & Light Truck.  snap- In tubeless tyre valve series of TR412,TR413,TR414,TR415,TR418,TR423,TR425. Rubber base import from Thailand. Material is EPDM 30%. C/E Cap as your request. Chrome-sleeve snap in valves such as TR413C,TR414C,TR418C,TR413FC,TR414FC. Rim hole is 11.5.  1. All valves are made of 59% copper and natural rubber,

[Related Keywords : tire valve, wheel weights, tr414, tire]

Water Control Valve IWDXRF-900X

• Min. Order:  

  1 sets

• Place of origin:  

  China

• Supply Ability:  

  5000pcs/month

5 O-RING NBR/EPDM 6 SEAL RING NBR/EPDM 7 DISC ASTM A126-B/A536, WCB, CF8, CF8M 8 DIAPHRAGM NBR/EPDM 9 PLATE ASTM A126-B/A536, WCB, CF8, CF8M 10 NUT Carbon Steel/Stainless Steel 11 SPRING Stainless Steel 12 CAP ASTM A126-B/A536, WCB, CF8, CF8M 13 O-RING Alloy Brass/Stainless Steel 14 BOLT Carbon Steel/Stainless Steel 15 NUT Carbon Steel/Stainless Steel OTHER MATERIALS ARE AVAILABLE UPON REQUEST.

[Related Keywords : Water Control Valve, valves, Forged Steel Valves, Cast Steel Valves]

Carbon Stainless Steel V-port Ball Valve Wafer Type

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

• Supply Ability:  

  1000

CAP ASTM A216-WCB A351-CF8 A351-CF8M A351-CF3 A351-CF3M 2 GASKET RPTFE/GRAPHITE 3 BODY ASTM A216-WCB A351-CF8 A351-CF8M A351-CF3 A351-CF3M 4 LOWER STEM ASTM A182-F6 A182-F304 A182-F316 A182-F304L A182-F316L 5 V BALL ASTM A105+ENP A182-F304 A182-F316 A182-F304L A182-F316L 6 SEAT SEAL RING PTFE/RPTFE/NYLON 7 METAL SEAT A105+ENP F304 F316 F304L F316L 8 O-RING EPDM/NBR/VITON 9 STEM ASTM A182-

[Related Keywords : Ball Valve, V-port Wafer Type, SOFT SEAL, AVAILABLE METAL SEAL]

Socket End Resilient Seated Gate Valve

• Min. Order:  

  1 pair

• Price:  

  USD 100

• Place of origin:  

  China

• Price Condition:  

  FOB Tianjin Port

• Supply Ability:  

  1000 Set/Month

EPDM Washer PTFE Stem Stainless steel Thrust collar Brass Wedge Nut Brass Washer PTFE Bonnet Ductile iron Dust Cover NBR Bonnet gasket EPDM rubber Handwheel/Cap Ductile Iron Bonnet Ductile Iron Bonnet bolt Steel gr.8.8 Other information you can visit: http://www.generalblogger.cn http://www.electricblogger.info http://www.boxpackagingfactory.com http://www.petromineralscorp.com http://www.zaifurn

[Related Keywords : Gate Valve, Check Valve, Butterfly Valve]

BS5163 Resilient Seated Gate Valve

• Min. Order:  

  1 Piece

• Price:  

  US$ 40

• Place of origin:  

  China

• Price Condition:  

  FOB

1. Valve is supplied with hand wheel or bare shaft with square cap or gear box. 2. A stem dust guard is fitted. 3. Stainless steel bonnet bolts are plastic sealed. 4. Wedge is in ductile iron with EPDM or NBR coated. 5. Wedge with central guides to avoid rubber friction when operating. 6. Internally and externally coated with Epoxy by electrostatic coating. 7. Full and straight bore avoids turbul

[Related Keywords : soft seat, gate valve, valve, rubber seat]

POE (mLLDPE)

• Min. Order:  

  1 FCL (20')

• Place of origin:  

  Korea

• Price Condition:  

  CIF Busan

• Supply Ability:  

  100 MT/Mon

EPDM (Ethylene Propylene Dien Monomer) This is a high value-added synthetic rubber that possesses outstanding resistance to foul weather, heat and corrosive ozone so that mainly used in automotive components.. - Etc. 2. Products by Application Most of resin manufacturers we have the strong connections have their own products on the first class grades in the world, and the superiority of product

[Related Keywords : LLDPE, HDPE, LDPE, PP]

BS5163 Non-Rising Stem Gate Valve Resilient Seat Ductile Body Epdm Seat

• Place of origin:  

  China

• Price Condition:  

  FOB

Cap top, hand wheel, Gear box, electric actuator, etc. 8. Working temperature:-20 to 120 centigrade. (EPDM:-20 to 120, NBR: -10 to 80). Main parts materials a) Seat: EPDM/NBR. b) Gland follower: brass/ductile iron. c) Bolt and nut: stainless steel, steel with zinc. d) Stem: stainless steel, brass, bronze, steel with zinc. e) Hand-wheel: ductile iron/ malleable Iron/carbon steel. f) Body/Bonnet/Di

[Related Keywords : gate valve, non rising gate valve, resilient seat gate valve, ductile iron gate valve]

Customized Heat Resistant Silicone Rubber Caps and Plugs

• Min. Order:  

  500 Piece

• Price:  

  US$ 0.1

• Place of origin:  

  China

Product Name Customized Heat Resistant Silicone Rubber Caps and Plugs Material NBR, HNBR, EPDM, SILICONE, FKM, FFKM, Natural Rubber, CR, etc Hardness 40-90Shore A Standard ASTM D2000, SAE, DIN, Colors Any color Package Inner Packing--Plastic Bag, Outer Packing--Carton Box Delivery time 10-15days for tool building 3-15days for goods production After-sales service Unreasonable return for product q

[Related Keywords : rubber cap, silicone cap plug, rubber seal, rubber masking solution]