Min. Order:
1 Pallet
Price:
€ 1000
Place of origin:
Denmark
agents. Where to use Exterior and interior on boats above the waterline, when a glossy, solid, and waterproof surface is required. Also suitable for indoor use on e.g., skirting boards, panels, railings etc. Odor Strong. Odorless after drying. Coverage App. 10-14 m2/L, depending on the substrate. Drying time -Touch dry: 2 hours -Recoatable: 6 hours -Fully cured: app. 48 hours (measured at 23°C a
[Related Keywords : wood coatings]
Business Type
Supplier
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 2,000,001 - 5,000,000
Min. Order:
100 Kilogram
Price:
US$ 2
Place of origin:
China
Supply Ability:
5000mt per year
The pruduct is the bottom design of the three-layer structure of polyolefin in buried steel-made pipe, using appropriate epoxy resin, curing agent, pigment, filler, etc., and can form a composite anticorrosion system with excellent performance with intermediate layer adhesive and outer polyolefin. COLORS AVAILABLERAL colors coating powderPantone colorsColor-matching regarding customer requirement
[Related Keywords : FBE, Powder Coating, Fusion Bonded Epoxy, coat]
Business Type
Manufacturer
Location
Jiangsu, China
Employees Total
101 - 500
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
Korea
gloss and keep opacity mostly B - No gloss and weak opacity C - No gloss and lost opacity mostly * Sulfide Resistance Preparation of reagents : Sodium Sulfide (Na2S 9H2O ) Acetic Acid ( CH3COOH, min. 99.8% ) Dissolve an excess amount of sodium sulfide in warm (35 to 40 ?) distilled water. Make sure there is undissolved sodium sulfide left over. Cool to room temperature. Stir into each 100m
[Related Keywords : Onglaze color, pigment, ceramic color, decal]
Business Type
Manufacturer
Location
Seoul, Korea
Employees Total
1 - 5
Annual Revenue
USD 5,000,001 - 10,000,0000
Place of origin:
China
gloss, softness, wash resistance and environmental protection, etc. 4. Technical parameters: Abrasive effect: strong, medium and small Appearance: milky white paste Adhesion: good Viscosity(25℃): 150 - 250Pa.s Water resistance: grade 5 Flexibility: good on cardboard Curing rate: 20-30m/min Curing energy: ≥70mj/c㎡ Solid content: ≥98% 5. Instructions: (1) Mesh: Please use 100-420 polyeste
[Related Keywords : Screen printing, UV varnish, UV texture varnish]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
101 - 500
Annual Revenue
USD 5,000,001 - 10,000,0000
Min. Order:
1000 Kilogram
Price:
US$ 1.5 ~ 3
Place of origin:
China
Supply Ability:
1000tons/month
Polyamide Curing Agent ET 115Description:ET 115 is a high viscosity, reactive polyamide resin based on dimerized fatty acid and polyamines. ET 115 gives coatings better flexibility and corrosion resistance than ET 125, but ET 125 has better compressive resistance and pull resistance.Features:Excellent water and corrosion resistance; Excellent toughness and flexibility; Excellent adhesion; Excelle
[Related Keywords : polyamide resin, epoxy curing agent, polyamide hardener]
Business Type
Manufacturer
Location
Shanghai, China
Employees Total
51 - 100
Annual Revenue
USD 10,000,001 - 50,000,000
Place of origin:
China
curing agent. Milestone Industrial Co. Ltd. can provide high temperature powder coatings of various colors and luster, and can also be customized according to customers' specific requirements. It is widely used in cookware, instrument shell, electromechanical equipment, microwave oven shell and other fields. 2.Performance of MST®High Temperature Powder Coatings: 1) Chemical type: Polyester / TGI
[Related Keywords : Powder Coatings]
Business Type
Manufacturer
Location
Hebei, China
Employees Total
101 - 500
Annual Revenue
USD 500,001 - 1,000,000
Place of origin:
China
curing agent, water-based adhesive, organic synthesis intermediate, insulating paint, cleaning agent, paint remover, adhesive, flux, coating solvent, leather brightener. Security termsS26 - In case of accidental contact with eyes, rinse immediately with plenty of water and seek medical advice.S36 - Wear suitable protective clothing.S24/25 - Avoid contact with skin and eyes.S22 - Do not breathe du
[Related Keywords : Odorless Paint Thinner]
Business Type
Manufacturer
Location
Shandong, China
Employees Total
101 - 500
Annual Revenue
USD 1,000,001 - 2,000,000
Min. Order:
1 Ton
Price:
US$ 4.8
Place of origin:
China
Supply Ability:
2000T/month
gloss flat powder. E-14 Softening Point：89-93℃ Epoxy Equivalent eq/100g：0.133-0.143 Organic Chlorine eq/100g：≤0.0020 Inorganic Chlorine eq/100g：≤0.0005 Narrow molecular weight,high function and good film adhesion,suitable for low-temperature curing powder. Curing in 130℃ with suitable curing agent. E-17 Softening Point：84-85℃ Epoxy Equivalent eq/100g：≥0.147 Chlorine Conten
[Related Keywords : epoxy resin, coating resin, powder coating]
Business Type
Manufacturer
Location
Anhui, China
Employees Total
101 - 500
Annual Revenue
More than 100,000,000
Place of origin:
Korea
Price Condition:
FOB
curing agent) = 3:1 Top coating 1st urethane coating is for protecting the film, and is based on 35μm thickness Excellent weather resistance, so it is very few yellowing. Excellent chemical resistance and good adhesion. Excellent impact resistance, so there is no delamination caused by the shock. Corrosion resistance, chemical resistance, water resistance and waterproofare good. Workability is
[Related Keywords : waterproof flooring, korea flooring, korea epoxy, epoxy paint]
Business Type
Manufacturer
Location
Gyeonggi-do, Korea
Employees Total
11 - 50
Annual Revenue
USD 500,001 - 1,000,000
Min. Order:
500 Kilogram
Price:
US$ 1.3
Place of origin:
China
agent Benzoin 564 42 384 7 3 ◇ Extrusion Condition: Two-screw extruder Zone I: 90～110℃ Zone II: 110～120℃ Speed of revolution: 500～1200rpm Fineness of powder: ＜100μm ◇ Application Condition: Electrostatic spraying with: 40～70KV Film thickness: 50～100μm Degreased cold-rolled steel 0.5mm ◇ Curing Requirement: 200℃×10~15min ◇ Film Properties: Gel time(180℃,sec) 360~510
[Related Keywords : powder coating, polyester resin]
Business Type
Manufacturer
Location
Guangdong, China
Employees Total
Above 1000
Annual Revenue
USD 50,000,001 - 100,000,000
Min. Order:
25 metric ton
Price:
USD 500
Place of origin:
South Africa
Price Condition:
CIF
Supply Ability:
4000 Metric Ton per month
curing agent Mirror-effect Varnish High gloss varnish Primer 2K Base Primer 2K Intermediate Primer Epoxy anti-rust Primer Plastic Primer Hardener/Curing Agent Curing Agent Series Designed for 2K topcoat and varnish there are 2 series of curing agent :High-concentration and Mid-concentration,and each series have 3 kind:Standard,Quick,Slow Dry Curing Agent for Base Coating Curing Agent for Intermed
[Related Keywords : Lacquer Thinner, Epoxy, Nitro Lacquer, NC Thinner]
Business Type
Supplier
Location
Gauteng, South Africa
Employees Total
6 - 10
Annual Revenue
USD 100,000 - 500,000
Min. Order:
1 Metric Ton
Price:
US$ 900 ~ 2000
Place of origin:
China
gloss, can be polished, has better transparency, and can be used for aniline finishing. Die-casting release agent, the paper wax emulsion can shorten the release cycle, improve production efficiency, reduce waste generated in the production process, reduce energy consumption, and extend the service life of the mold. At the same time, the wax emulsion can also be used as a lubricant to reduce the
[Related Keywords : Wax Emulsion]
Business Type
Manufacturer
Location
Liaoning, China
Employees Total
6 - 10
Annual Revenue
Less than USD 100,000
Competitive gloss curing agent products from various gloss curing agent manufacturers and gloss curing agent suppliers are listed above, please select quality and cheap items for you.
 |
